Evaluating the Theoretical Background of STOFFENMANAGER® and the Advanced REACH Tool.

STOFFENMANAGER® and the Advanced REACH Tool (ART) are recommended tools by the European Chemical Agency for regulatory chemical safety assessment. The models are widely used and accepted within the scientific community. STOFFENMANAGER® alone has more than 37 000 users globally and more than 310 000 risk assessment have been carried out by 2020. Regardless of their widespread use, this is the first study evaluating the theoretical backgrounds of each model. STOFFENMANAGER® and ART are based on a modified multiplicative model where an exposure base level (mg m-3) is replaced with a dimensionless intrinsic emission score and the exposure modifying factors are replaced with multipliers that are mainly based on subjective categories that are selected by using exposure taxonomy. The intrinsic emission is a unit of concentration to the substance emission potential that represents the concentration generated in a standardized task without local ventilation. Further information or scientific justification for this selection is not provided. The multipliers have mainly discrete values given in natural logarithm steps (…, 0.3, 1, 3, …) that are allocated by expert judgements. The multipliers scientific reasoning or link to physical quantities is not reported. The models calculate a subjective exposure score, which is then translated to an exposure level (mg m-3) by using a calibration factor. The calibration factor is assigned by comparing the measured personal exposure levels with the exposure score that is calculated for the respective exposure scenarios. A mixed effect regression model was used to calculate correlation factors for four exposure group [e.g. dusts, vapors, mists (low-volatiles), and solid object/abrasion] by using ~1000 measurements for STOFFENMANAGER® and 3000 measurements for ART. The measurement data for calibration are collected from different exposure groups. For example, for dusts the calibration data were pooled from exposure measurements sampled from pharmacies, bakeries, construction industry, and so on, which violates the empirical model basic principles. The calibration databases are not publicly available and thus their quality or subjective selections cannot be evaluated. STOFFENMANAGER® and ART can be classified as subjective categorization tools providing qualitative values as their outputs. By definition, STOFFENMANAGER® and ART cannot be classified as mechanistic models or empirical models. This modeling algorithm does not reflect the physical concept originally presented for the STOFFENMANAGER® and ART. A literature review showed that the models have been validated only at the 'operational analysis' level that describes the model usability. This review revealed that the accuracy of STOFFENMANAGER® is in the range of 100 000 and for ART 100. Calibration and validation studies have shown that typical log-transformed predicted exposure concentration and measured exposure levels often exhibit weak Pearson's correlations (r is <0.6) for both STOFFENMANAGER® and ART. Based on these limitations and performance departure from regulatory criteria for risk assessment models, it is recommended that STOFFENMANAGER® and ART regulatory acceptance for chemical safety decision making should be explicitly qualified as to their current deficiencies.

Technical control of nanoparticle emissions from desktop 3D printing.

Material extrusion (ME) desktop 3D printing is known to strongly emit nanoparticles (NP), and the need for risk management has been recognized widely. Four different engineering control measures were studied in real-life office conditions by means of online NP measurements and indoor aerosol modeling. The studied engineering control measures were general ventilation, local exhaust ventilation (LEV), retrofitted enclosure, and retrofitted enclosure with LEV. Efficiency between different control measures was compared based on particle number and surface area (SA) concentrations from which SA concentration was found to be more reliable. The study found out that for regular or long-time use of ME desktop 3D printers, the general ventilation is not sufficient control measure for NP emissions. Also, the LEV with canopy hood attached above the 3D printer did not control the emission remarkably and successful position of the hood in relation to the nozzle was found challenging. Retrofitted enclosure attached to the LEV reduced the NP emissions 96% based on SA concentration. Retrofitted enclosure is nearly as efficient as enclosure attached to the LEV (reduction of 89% based on SA concentration) but may be considered more practical solution than enclosure with LEV.

Source specific exposure and risk assessment for indoor aerosols.

Poor air quality is a leading contributor to the global disease burden and total number of deaths worldwide. Humans spend most of their time in built environments where the majority of the inhalation exposure occurs. Indoor Air Quality (IAQ) is challenged by outdoor air pollution entering indoors through ventilation and infiltration and by indoor emission sources. The aim of this study was to understand the current knowledge level and gaps regarding effective approaches to improve IAQ. Emission regulations currently focus on outdoor emissions, whereas quantitative understanding of emissions from indoor sources is generally lacking. Therefore, specific indoor sources need to be identified, characterized, and quantified according to their environmental and human health impact. The emission sources should be stored in terms of relevant metrics and statistics in an easily accessible format that is applicable for source specific exposure assessment by using mathematical mass balance modelings. This forms a foundation for comprehensive risk assessment and efficient interventions. For such a general exposure assessment model we need 1) systematic methods for indoor aerosol emission source assessment, 2) source emission documentation in terms of relevant a) aerosol metrics and b) biological metrics, 3) default model parameterization for predictive exposure modeling, 4) other needs related to aerosol characterization techniques and modeling methods. Such a general exposure assessment model can be applicable for private, public, and occupational indoor exposure assessment, making it a valuable tool for public health professionals, product safety designers, industrial hygienists, building scientists, and environmental consultants working in the field of IAQ and health.

Crawling-induced floor dust resuspension affects the microbiota of the infant breathing zone.

BACKGROUND: Floor dust is commonly used for microbial determinations in epidemiological studies to estimate early-life indoor microbial exposures. Resuspension of floor dust and its impact on infant microbial exposure is, however, little explored. The aim of our study was to investigate how floor dust resuspension induced by an infant's crawling motion and an adult walking affects infant inhalation exposure to microbes. RESULTS: We conducted controlled chamber experiments with a simplified mechanical crawling infant robot and an adult volunteer walking over carpeted flooring. We applied bacterial 16S rRNA gene sequencing and quantitative PCR to monitor the infant breathing zone microbial content and compared that to the adult breathing zone and the carpet dust as the source. During crawling, fungal and bacterial levels were, on average, 8- to 21-fold higher in the infant breathing zone compared to measurements from the adult breathing zone. During walking experiments, the increase in microbial levels in the infant breathing zone was far less pronounced. The correlation in rank orders of microbial levels in the carpet dust and the corresponding infant breathing zone sample varied between different microbial groups but was mostly moderate. The relative abundance of bacterial taxa was characteristically distinct in carpet dust and infant and adult breathing zones during the infant crawling experiments. Bacterial diversity in carpet dust and the infant breathing zone did not correlate significantly. CONCLUSIONS: The microbiota in the infant breathing zone differ in absolute quantitative and compositional terms from that of the adult breathing zone and of floor dust. Crawling induces resuspension of floor dust from carpeted flooring, creating a concentrated and localized cloud of microbial content around the infant. Thus, the microbial exposure of infants following dust resuspension is difficult to predict based on common house dust or bulk air measurements. Improved approaches for the assessment of infant microbial exposure, such as sampling at the infant breathing zone level, are needed.

Infant and Adult Inhalation Exposure to Resuspended Biological Particulate Matter.

Human-induced resuspension of floor dust is a dynamic process that can serve as a major indoor source of biological particulate matter (bioPM). Inhalation exposure to the microbial and allergenic content of indoor dust is associated with adverse and protective health effects. This study evaluates infant and adult inhalation exposures and respiratory tract deposited dose rates of resuspended bioPM from carpets. Chamber experiments were conducted with a robotic crawling infant and an adult performing a walking sequence. Breathing zone (BZ) size distributions of resuspended fluorescent biological aerosol particles (FBAPs), a bioPM proxy, were monitored in real-time. FBAP exposures were highly transient during periods of locomotion. Both crawling and walking delivered a significant number of resuspended FBAPs to the BZ, with concentrations ranging from 0.5 to 2 cm-3 (mass range: ∼50 to 600 µg/m3). Infants and adults are primarily exposed to a unimodal FBAP size distribution between 2 and 6 µm, with infants receiving greater exposures to super-10 µm FBAPs. In just 1 min of crawling or walking, 103-104 resuspended FBAPs can deposit in the respiratory tract, with an infant receiving much of their respiratory tract deposited dose in their lower airways. Per kg body mass, an infant will receive a nearly four times greater respiratory tract deposited dose of resuspended FBAPs compared to an adult.

Workplace Measurements of Ultrafine Particles-A Literature Review.

Workers are exposed to ultrafine particles (UFP) in a number of occupations. In order to summarize the current knowledge regarding occupational exposure to UFP (excluding engineered nanoparticles), we gathered information on UFP concentrations from published research articles. The aim of our study was to create a basis for future epidemiological studies that treat UFP as an exposure factor. The literature search found 72 publications regarding UFP measurements in work environments. These articles covered 314 measurement results and tabled concentrations. Mean concentrations were compared to typical urban UFP concentration level, which was considered non-occupational background concentration. Mean concentrations higher than the typical urban UFP concentration were reported in 240 workplace measurements. The results showed that workers' exposure to UFP may be significantly higher than their non-occupational exposure to background concentration alone. Mean concentrations of over 100 times the typical urban UFP concentration were reported in welding and metal industry. However, according to the results of the review, measurements of the UFP in work environments are, to date, too limited and reported too heterogeneous to allow us to draw general conclusions about workers' exposure. Harmonization of measurement strategies is essential if we are to generate more reliable and comparable data in the future.

Occupational health risk assessment and exposure to floor dust PAHs inside an educational building.

Polycyclic aromatic hydrocarbons (PAHs) settled in floor dust play an important role in human health. Although many studies investigated occupational exposure to PAHs, no attempts have been made to report PAHs concentrations as well as their health risk assessment inside an educational building in Jordan. Therefore, the main objective of this study is to report the PAHs concentrations in floor dust and evaluate their exposure and health risk inside the Department of Physics of the University of Jordan. The total PAHs concentrations ranged from 714 to 5246ng/g. The high concentrations were observed inside some offices, where tobacco smoking took place. One of those offices was previously renovated and some petrochemical liquids were used to remove the remaining glue from a previous carpet. Interestingly, the PAHs inside these offices were higher than those reported inside lecture rooms and the workshop area, where extensive activates of heavy machinery and use of petroleum products (such as lubricating oils). This implies that the health effects of exposure to tobacco smoking inside small micro-environmental places that are poorly ventilated can be very harmful. We also made a simple exposure and health risk assessment for the ingested dust (hand-to-mouth) by calculating the Estimated Daily Intake (EDI) and benzo(a)pyrene equivalent carcinogenic power (BaPE). The total EDI was less than 3.75ng/kg-bw/day whereas the BaPE was less than 385ng/g. These values are lower than what was reported in some previous studies in Europe and Asia.

Exposure to airborne particles and volatile organic compounds from polyurethane molding, spray painting, lacquering, and gluing in a workshop.

Due to the health risk related to occupational air pollution exposure, we assessed concentrations and identified sources of particles and volatile organic compounds (VOCs) in a handcraft workshop producing fishing lures. The work processes in the site included polyurethane molding, spray painting, lacquering, and gluing. We measured total VOC (TVOC) concentrations and particle size distributions at three locations representing the various phases of the manufacturing and assembly process. The mean working-hour TVOC concentrations in three locations studied were 41, 37, and 24 ppm according to photo-ionization detector measurements. The mean working-hour particle number concentration varied between locations from 3000 to 36,000 cm-3. Analysis of temporal and spatial variations of TVOC concentrations revealed that there were at least four substantial VOC sources: spray gluing, mold-release agent spraying, continuous evaporation from various lacquer and paint containers, and either spray painting or lacquering (probably both). The mold-release agent spray was indirectly also a major source of ultrafine particles. The workers' exposure can be reduced by improving the local exhaust ventilation at the known sources and by increasing the ventilation rate in the area with the continuous source.

Characterization of exposure to carbon nanotubes in an industrial setting.

While production and use of carbon nanotubes (CNTs) is increasing, workers exposure to CNTs is expected to increase as well, with inhalation being potentially the main pathway for uptake. However, there have been few studies reporting results about workers' personal exposure to CNTs. In this study, worker exposure to single-walled CNTs (SWCNTs) during the production of conductive films in a modern up-scaling factory was assessed. Particulate matter concentrations (2.5-10 µm) and concentrations of CO and CO2 were monitored by using real-time instruments. Workers' exposure levels to SWCNTs were qualitatively estimated by analyzing particle samples by transmission electron microscopy (TEM). TEM samples identified high aspect ratio (length/width > 500) SWCNTs in workplace air. SWCNT concentrations estimated from micrographs varied during normal operation, reactor use without local exhaust ventilation (LEV), and cleaning between 1.7×10(-3), 5.6 and 6.0×10(-3) SWCNT cm(-3), respectively. However, during cleaning it was unclear whether the SWCNTs originated from the cleaning itself or from other reactor openings. We were unable to quantify the SWCNT emissions with online particle instrumentation due to the SWCNT low concentrations compared to background particle concentrations, which were on average 2.6±1.1×10(3)cm(-3). However, CO concentrations were verified as a good indicator of fugitive emissions of SWCNTs. During normal operation, exposure levels were well below proposed limit values (1.0×10(-2) fibers cm(-3) and 1 µg m(-3)) when LEV was used. Based on the results in this study, the analysis of TEM grids seems to be the only direct method to detect SWCNTs in workplace air.

Inhalation of rod-like carbon nanotubes causes unconventional allergic airway inflammation.

BACKGROUND: Carbon nanotubes (CNT) represent a great promise for technological and industrial development but serious concerns on their health effects have also emerged. Rod-shaped CNT are, in fact, able to induce asbestos-like pathogenicity in mice including granuloma formation in abdominal cavity and sub-pleural fibrosis. Exposure to CNT, especially in the occupational context, happens mainly by inhalation. However, little is known about the possible effects of CNT on pulmonary allergic diseases, such as asthma. METHODS: We exposed mice by inhalation to two types of multi-walled CNT, rigid rod-like and flexible tangled CNT, for four hours a day once or on four consecutive days. Early events were monitored immediately and 24 hours after the single inhalation exposure and the four day exposure mimicked an occupational work week. Mast cell deficient mice were used to evaluate the role of mast cells in the occurring inflammation. RESULTS: Here we show that even a short-term inhalation of the rod-like CNT induces novel innate immunity-mediated allergic-like airway inflammation in healthy mice. Marked eosinophilia was accompanied by mucus hypersecretion, AHR and the expression of Th2-type cytokines. Exploration of the early events by transcriptomics analysis reveals that a single 4-h exposure to rod-shaped CNT, but not to tangled CNT, causes a radical up-regulation of genes involved in innate immunity and cytokine/chemokine pathways. Mast cells were found to partially regulate the inflammation caused by rod-like CNT, but also alveaolar macrophages play an important role in the early stages. CONCLUSIONS: These observations emphasize the diverse abilities of CNT to impact the immune system, and they should be taken into account for hazard assessment.

Range-finding risk assessment of inhalation exposure to nanodiamonds in a laboratory environment.

This study considers fundamental methods in occupational risk assessment of exposure to airborne engineered nanomaterials. We discuss characterization of particle emissions, exposure assessment, hazard assessment with in vitro studies, and risk range characterization using calculated inhaled doses and dose-response translated to humans from in vitro studies. Here, the methods were utilized to assess workers' risk range of inhalation exposure to nanodiamonds (NDs) during handling and sieving of ND powder. NDs were agglomerated to over 500 nm particles, and mean exposure levels of different work tasks varied from 0.24 to 4.96 µg·m(-3) (0.08 to 0.74 cm(-3)). In vitro-experiments suggested that ND exposure may cause a risk for activation of inflammatory cascade. However, risk range characterization based on in vitro dose-response was not performed because accurate assessment of delivered (settled) dose on the cells was not possible. Comparison of ND exposure with common pollutants revealed that ND exposure was below 5 µg·m(-3), which is one of the proposed exposure limits for diesel particulate matter, and the workers' calculated dose of NDs during the measurement day was 74 ng which corresponded to 0.02% of the modeled daily (24 h) dose of submicrometer urban air particles.

Modeling regional deposited dose of submicron aerosol particles.

We developed a simple model to calculate the regional deposited dose of submicron aerosol particles in the respiratory system. This model incorporates measured outdoor and modeled indoor particle number size distributions, detailed activity patterns of three age groups (teens, adults, and the elderly), semi-empirical estimation of the regional deposition fraction, hygroscopic properties of urban aerosols, and reported breathing minute volumes. We calculated the total and regional deposited dose based on three concentration metrics: particle number (PN), mass (PM), and surface area (PSA). The 24-h total deposited dose of fine particles in adult males was around 40 µg (57×109 particles, 8×102 mm(2)) and 41 µg (40×109 particles, 8×102 mm(2)) on workdays and weekends, respectively. The total and regional 24-h deposited dose based on any of the metrics was at most 1.5 times higher in males than in females. The deposited dose values in the other age groups were slightly different than in adults. Regardless of the particle size fraction or the deposited dose metric, the pulmonary/alveolar region received the largest fraction of the deposited dose. These values represent the lowest estimate of the deposited dose and they are expected to be higher in real-life conditions after considering indoor sources of aerosol particles and spatial variability of outdoor aerosols. This model can be extended to youngsters (<12 years old) after gaining accurate information about the deposition fraction inside their respiratory system and their breathing pattern. This investigation is foreseen to bridge the gap between exposure and response in epidemiological studies.

Particulate matter air pollution and respiratory symptoms in individuals having either asthma or chronic obstructive pulmonary disease: a European multicentre panel study.

BACKGROUND: Particulate matter air pollution has been associated with adverse health effects. The fraction of ambient particles that are mainly responsible for the observed health effects is still a matter of controversy. Better characterization of the health relevant particle fraction will have major implications for air quality policy since it will determine which sources should be controlled.The RUPIOH study, an EU-funded multicentre study, was designed to examine the distribution of various ambient particle metrics in four European cities (Amsterdam, Athens, Birmingham, Helsinki) and assess their health effects in participants with asthma or COPD, based on a detailed exposure assessment. In this paper the association of central site measurements with respiratory symptoms and restriction of activities is examined. METHODS: At each centre a panel of participants with either asthma or COPD recorded respiratory symptoms and restriction of activities in a diary for six months. Exposure assessment included simultaneous measurements of coarse, fine and ultrafine particles at a central site. Data on gaseous pollutants were also collected. The associations of the 24-hour average concentrations of air pollution indices with the health outcomes were assessed in a hierarchical modelling approach. A city specific analysis controlling for potential confounders was followed by a meta-analysis to provide overall effect estimates. RESULTS: A 10 µg/m3 increase in previous day coarse particles concentrations was positively associated with most symptoms (an increase of 0.6 to 0.7% in average) and limitation in walking (OR= 1.076, 95% CI: 1.026-1.128). Same day, previous day and previous two days ozone concentrations were positively associated with cough (OR= 1.061, 95% CI: 1.013-1.111; OR= 1.049, 95% CI: 1.016-1.083 and OR= 1.059, 95% CI: 1.027-1.091, respectively). No consistent associations were observed between fine particle concentrations, nitrogen dioxide and respiratory health effects. As for particle number concentrations negative association (mostly non-significant at the nominal level) was observed with most symptoms whilst the positive association with limitation of activities did not reach the nominal level of significance. CONCLUSIONS: The observed associations with coarse particles are in agreement with the findings of toxicological studies. Together they suggest it is prudent to regulate also coarse particles in addition to fine particles.

Concept to estimate regional inhalation dose of industrially synthesized nanoparticles.

The use of nanoparticles (NPs) in industry is increasing rapidly, but knowledge of the occupational health and safety aspects of NPs is still limited. This is because quantitative NP exposure levels are scarce, and the metrics to describe doses are unclear. This study presents one method for estimating workers' calculated regional inhalation dose of deposited particles from size-fractionated concentrations. It was applied to estimate workers' regional inhalation dose rates and doses separately for NPs and NPs with background particles during NP synthesis. Dose analysis was performed in units of particle number (particles and particles min(-1)), active surface area (µm(2) and µm(2) min(-1)), and mass (ng and ng min(-1)) for three respiratory regions: head airways, tracheobronchial, and alveolar. It was found that in NP synthesis NPs were deposited mainly in the alveolar region in all units. However, when the dose of all particles was examined, it was found that dose and the main deposition region were mainly defined by the synthesized NPs for particle number, as active surface area was described by both NPs and background particles, and mass by background particles. This study provides fundamental data for NP inhalation exposure risk assessment, regulations, dose metrics for NP synthesis, and a basis for defining metrics of dose-biological response and helps us understand the magnitude of doses in NP synthesis. It also illustrates the necessity to obtain size-fractionated measurements of NP concentrations to support accurate dose estimation.

Temporal variations of atmospheric aerosol in four European urban areas.

PURPOSE: The concentrations of PM(10) mass, PM(2.5) mass and particle number were continuously measured for 18 months in urban background locations across Europe to determine the spatial and temporal variability of particulate matter. METHODS: Daily PM(10) and PM(2.5) samples were continuously collected from October 2002 to April 2004 in background areas in Helsinki, Athens, Amsterdam and Birmingham. Particle mass was determined using analytical microbalances with precision of 1 µg. Pre- and post-reflectance measurements were taken using smoke-stain reflectometers. One-minute measurements of particle number were obtained using condensation particle counters. RESULTS: The 18-month mean PM(10) and PM(2.5) mass concentrations ranged from 15.4 µg/m(3) in Helsinki to 56.7 µg/m(3) in Athens and from 9.0 µg/m(3) in Helsinki to 25.0 µg/m(3) in Athens, respectively. Particle number concentrations ranged from 10,091 part/cm(3) in Helsinki to 24,180 part/cm(3) in Athens with highest levels being measured in winter. Fine particles accounted for more than 60% of PM(10) with the exception of Athens where PM(2.5) comprised 43% of PM(10). Higher PM mass and number concentrations were measured in winter as compared to summer in all urban areas at a significance level p < 0.05. CONCLUSIONS: Significant quantitative and qualitative differences for particle mass across the four urban areas in Europe were observed. These were due to strong local and regional characteristics of particulate pollution sources which contribute to the heterogeneity of health responses. In addition, these findings also bear on the ability of different countries to comply with existing directives and the effectiveness of mitigation policies.

Airway exposure to silica-coated TiO2 nanoparticles induces pulmonary neutrophilia in mice.

The importance of nanotechnologies and engineered nanoparticles has grown rapidly. It is therefore crucial to acquire up-to-date knowledge of the possible harmful health effects of these materials. Since a multitude of different types of nanosized titanium dioxide (TiO(2)) particles are used in industry, we explored their inflammatory potential using mouse and cell models. BALB/c mice were exposed by inhalation for 2 h, 2 h on 4 consecutive days, or 2 h on 4 consecutive days for 4 weeks to several commercial TiO(2) nanoparticles, SiO(2) nanoparticles, and to nanosized TiO(2) generated in a gas-to-particle conversion process at 10 mg/m(3). In addition, effects of in vitro exposure of human macrophages and fibroblasts (MRC-9) to the different particles were assessed. SiO(2)-coated rutile TiO(2) nanoparticles (cnTiO(2)) was the only sample tested that elicited clear-cut pulmonary neutrophilia. Uncoated rutile and anatase as well as nanosized SiO(2) did not induce significant inflammation. Pulmonary neutrophilia was accompanied by increased expression of tumor necrosis factor-alpha (TNF-alpha) and neutrophil-attracting chemokine CXCL1 in the lung tissue. TiO(2) particles accumulated almost exclusively in the alveolar macrophages. In vitro exposure of murine and human macrophages to cnTiO(2) elicited significant induction of TNF-alpha and neutrophil-attracting chemokines. Stimulation of human fibroblasts with cnTiO(2)-activated macrophage supernatant induced high expression of neutrophil-attracting chemokines, CXCL1 and CXCL8. Interestingly, the level of lung inflammation could not be explained by the surface area of the particles, their primary or agglomerate particle size, or radical formation capacity but is rather explained by the surface coating. Our findings emphasize that it is vitally important to take into account in the risk assessment that alterations of nanoparticles, e.g., by surface coating, may drastically change their toxicological potential.

Heavy duty diesel engine exhaust aerosol particle and ion measurements.

Heavy duty EURO 4 diesel engine exhaust particle and ion size distributions were measured atthetailpipe using dynamometer testing. Measurements of particle volatility and electrical charge were undertaken to clarify diesel exhaust nucleation mode characteristics with different exhaust after-treatment systems. Nucleation mode particle volatility and charging probability were dependent on exhaust after-treatment particles were volatile and uncharged when the engine was equipped with diesel particulate filter and partly volatile and partly charged in exhaust without any after-treatment or with an oxidation catalyst only. The absence of charged particles in the nucleation mode of diesel particulate filtered exhaust excludes the ion mediated process as a nucleation particle formation mechanism.

Driver and passenger exposure to aerosol particles in buses and trams in Helsinki, Finland.

This study investigates commuter and driver exposure to aerosol particles in buses and trams in Helsinki, Finland. Particle number and PM(2.5) concentrations were determined in the cabin and the driver's compartment. In addition, the <2.5 microm black carbon concentration was measured in the driver's compartment and PM(2.5) was collected for elemental analysis in the cabin. The measurements were repeated on two generations of buses and trams including two measurement days in each vehicle type. Fine particle number and mass concentrations in the driver's compartments were only slightly increased compared to Helsinki background air. Daily average ratios of number and mass to the background varied in range 0.8-4.3 and 1.0-2.9, respectively, both being the highest in the older bus type. However, the drivers were exposed to elevated levels of black carbon, which some studies have addressed to be strongly correlated with adverse health effects. The daily average ratio of black carbon to the background varied between 2.4 and 11.4. Additionally, the black carbon concentration had spatial variation. The drivers were exposed to higher peak concentrations of black carbon in downtown area. Particle concentrations were smaller in the driver's compartment than in the cabin. The newer technology in the newer model of the tram and bus seemed to decrease driver exposure to aerosol particles.

Wood dust particle and mass concentrations and filtration efficiency in sanding of wood materials.

The importance of fine particles has become apparent as the knowledge of their effects on health has increased. Fine particle concentrations have been published for outside air, plasma arc cutting, welding, and grinding, but little data exists for the woodworking industry. Sanding was evaluated as the producer of the woodworking industry's finest particles, and was selected as the target study. The number of dust particles in different particle size classes and the mass concentrations were measured in the following environments: workplace air during sanding in plywood production and in the inlet and return air; in the dust emission chamber; and in filter testing. The numbers of fine particles were low, less than 10(4) particles/cm(3) (10(7) particles/L). They were much lower than typical number concentrations near 10(6) particles/cm(3) measured in plasma arc cutting, grinding, and welding. Ultrafine particles in the size class less than 100 nm were found during sanding of MDF (medium density fiberboard) sheets. When the cleaned air is returned to the working areas, the dust content in extraction systems must be monitored continuously. One way to monitor the dust content in the return air is to use an after-filter and measure pressure drop across the filter to indicate leaks in the air-cleaning system. The best after-filtration materials provided a clear increase in pressure drop across the filter in the loading of the filter. The best after-filtration materials proved to be quite effective also for fine particles. The best mass removal efficiencies for fine particles around 0.3 mum were over 80% for some filter materials loaded with sanding wood dust.

A simple procedure for correcting loading effects of aethalometer data.

A simple method for correcting for the loading effects of aethalometer data is presented. The formula BC(CORRECTED) = (1 + k x ATN) x BC(NONCORRECTED), where ATN is the attenuation and BC is black carbon, was used for correcting aethalometer data obtained from measurements at three different sites: a subway station in Helsinki, an urban background measurement station in Helsinki, and a rural station in Hyytiälä in central Finland. The BC data were compared with simultaneously measured aerosol volume concentrations (V). After the correction algorithm, the BC-to-V ratio remained relatively stable between consequent filter spots, which can be regarded as indirect evidence that the correction algorithm works. The k value calculated from the outdoor sites had a clear seasonal cycle that could be explained by darker aerosol in winter than in summer. When the contribution of BC to the total aerosol volume was high, the k factor was high and vice versa. In winter, the k values at all wavelengths were very close to that obtained from the subway station data. In summer, the k value was wavelength dependent and often negative. When the k value is negative, the noncorrected BC concentrations overestimated the true concentrations.