Treatment of distillery vinasse in a high rate anaerobic reactor using low density polyethylene supports.

An anaerobic fixed bed reactor, filled with small floating supports of polyethylene material (Bioflow 30) as inert media, was operated for 6 months to treat vinasse (wine residue after distillation). Bioflow 30 has a density of 0.93 and a specific area of 320 m2/m3. The experimental results showed that the efficiency of the reactor in removal of soluble COD was very good with a maximum organic loading rate of more than 30 g of COD/L x d and a COD removal efficiency of more than 80%. Bioflow 30 showed a high capability of biomass retention with 4-6 g of dried solids per support. Thus, at the end of the experiment, the fixed biomass represented 57 g of solids/L of reactor. The visual observation of the supports and the specific activity (0.54 g COD/g solids x d) of the fixed solids, which remained close to the values obtained with suspended biomass, showed that entrapment was playing an important role in the retention of the biomass inside the reactor. It was then possible to operate the reactor with a very high loading rate as the result of the increase of the solids in the reactor and the maintaining of the specific activity. Bioflow 30 is then an excellent support for use in a high rate anaerobic fixed bed.

Treatment of hypersaline industrial wastewater by a microbial consortium in a sequencing batch reactor.

Hypersaline effluents are produced by various industrial activities. Such wastewater, rich in both organic matter and salt (> 35 g l(-1)), is difficult to treat by conventional wastewater treatment processes. It is necessary to use halophilic bacteria. In this study, a bench-scale sequencing batch reactor (SBR) was inoculated with halophilic sediments in order to treat an agri-food effluent containing 120 g salt l(-1). The micro-organisms were able to treat carbon and nitrogen, provided the pH in the reactor was neutralised with phosphoric acid. Soluble COD and Soluble TKN removal attained 83% and 72% respectively. 16S rDNA identification of the halophilic microbial community showed high diversity.

Molecular microbial diversity of an anaerobic digestor as determined by small-subunit rDNA sequence analysis.

The bacterial community structure of a fluidized-bed reactor fed by vinasses (wine distillation waste) was analyzed. After PCR amplification, four small-subunit (SSU) rDNA clone libraries of Bacteria, Archaea, Procarya, and Eucarya populations were established. The community structure was determined by operational taxonomic unit (OTU) phylogenetic analyses of 579 partial rDNA sequences (about 500 bp long). A total of 146 OTUs were found, comprising 133, 6, and 7 from the Bacteria, Archaea, and Eucarya domains, respectively. A total of 117 bacterial OTU were affiliated with major phyla: low-G+C gram-positive bacteria, Cytophaga-Flexibacter-Bacteroides, Proteobacteria, high-G+C gram-positive bacteria, and Spirochaetes, where the clone distribution was 34, 26, 17, 6, and 4%, respectively. The other 16 bacterial OTUs represent 13% of the clones. They were either affiliated with narrow phyla such as Planctomyces-Chlamydia, green nonsulfur bacteria, or Synergistes, or deeply branched on the phylogenetic tree. A large number of bacterial OTUs are not closely related to any other hitherto determined sequences. The most frequent bacterial OTUs represents less than 5% of the total bacterial SSU rDNA sequences. However, the 20 more frequent bacterial OTUs describe at least 50% of these sequences. Three of the six Archaea OTUs correspond to 95% of the Archaea population and are very similar to already known methanogenic species: Methanosarcina barkeri, Methanosarcina frisius, and Methanobacterium formicicum. In contrast, the three other Archaea OTUs are unusual and are related to thermophilic microorganisms such as Crenarchaea or Thermoplasma spp. Five percent of the sequences analyzed were chimeras and were removed from the analysis.