Side-gated ultrathin-channel nanopore FET sensors.

A side-gated, ultrathin-channel nanopore FET (SGNAFET) is proposed for fast and label-free DNA sequencing. The concept of the SGNAFET comprises the detection of changes in the channel current during DNA translocation through a nanopore and identifying the four types of nucleotides as a result of these changes. To achieve this goal, both p- and n-type SGNAFETs with a channel thicknesses of 2 or 4 nm were fabricated, and the stable transistor operation of both SGNAFETs in air, water, and a KCl buffer solution were confirmed. In addition, synchronized current changes were observed between the ionic current through the nanopore and the SGNAFET's drain current during DNA translocation through the nanopore.

Deceleration of single-stranded DNA passing through a nanopore using a nanometre-sized bead structure.

DNA sequencing with a solid-state nanopore requires a reduction of the translocation speeds of single-stranded DNA (ssDNA) over 10 µs/base. In this study, we report that a nanometre-sized bead structure constructed around a nanopore can reduce the moving speed of ssDNA to 270 µs/base by adjusting the diameter of the bead and its surface chemical group. This decelerating effect originates from the strong interaction between ssDNA and the chemical group on the surface of the bead. This nanostructure was simply prepared by dip coating in which a substrate with a nanopore was immersed in a silica bead solution and then dried in an oven. As compared with conventional approaches, our novel method is less laborious, simpler to perform and more effective in reducing ssDNA translocation speed.

Slowing single-stranded DNA translocation through a solid-state nanopore by decreasing the nanopore diameter.

To slow the translocation of single-stranded DNA (ssDNA) through a solid-state nanopore, a nanopore was narrowed, and the effect of the narrowing on the DNA translocation speed was investigated. In order to accurately measure the speed, long (5.3 kb) ssDNA (namely, ss-poly(dA)) with uniform length (±0.4 kb) was synthesized. The diameters of nanopores fabricated by a transmission electron microscope were controlled by atomic-layer deposition. Reducing the nanopore diameter from 4.5 to 2.3 nm slowed down the translocation of ssDNA by more than 16 times (to 0.18 µs base(-1)) when 300 mV was applied across the nanopore. It is speculated that the interaction between the nanopore and the ssDNA dominates the translocation speed. Unexpectedly, the translocation speed of ssDNA through the 4.5 nm nanopore is more than two orders of magnitude higher than that of double-stranded DNA (dsDNA) through a nanopore of almost the same size. The cause of such a faster translocation of ssDNA can be explained by the weaker drag force inside the nanopore. Moreover, the measured translocation speeds of ssDNA and dsDNA agree well with those calculated by molecular-dynamics (MD) simulation. The MD simulation predicted that reducing the nanopore diameter to almost the same as that of ssDNA (i.e. 1.4 nm) decreases the translocation speed (to 1.4 µs base(-1)). Narrowing the nanopore is thus an effective approach for accomplishing nanopore DNA sequencing.

Prism-based spectral imaging of four species of single-molecule fluorophores by using one excitation laser.

A prism-based imaging system for simultaneously detecting four species of single-molecule (SM) fluorophores was developed. As for the detection method, four spectrally distinct species of BigDye fluorophores were bound to 50-nm-diameter gold nanoparticles (AuNPs) to form AuNP/BigDye complexes. Four species of complexes were randomly immobilized on different fused-silica slides. BigDyes were excited by an argon-ion-laser (excitation wavelengths: 488 and 514.5 nm) beam through total internal reflection on the slide surface. SM fluorescence emitted from a complex was spectrally dispersed through a prism to form an SM spot elongated in the spectral direction on a charge-coupled device. A scattered light spot generated by the AuNP of the same complex under 594-nm laser illumination was used as a wavelength reference, and the SM fluorescence spectrum was obtained from the pixel-intensity pattern of the elongated SM spot. Peak locations of fluorescence spectra of all the observed SM spots were obtained, and their histograms were distinctly separated according to species. SM spots can thus be classified as one of four species according to their peak locations. By statistically analyzing the histograms, the classification accuracy was estimated to be above 93.8 %. The number of pixels in the spectral direction required for classifying four species of SM fluorophores was estimated to be 10. As for the conventional system (which uses two excitation lasers), 15 pixels are required. Using BigDyes as the four fluorophores (which consist of donors linked to acceptors and can be excited by just an argon-ion laser) is the reason that such a small number of pixels was achieved. The developed system can thus detect 1.5 times more SM fluorophores per field of view; that is, its throughput is 1.5 times higher. The approach taken in this study, namely, using BigDye with a prism-type system, is effective for increasing the throughput of DNA microarray-chip analysis and SM real-time DNA sequencing.

Dual-view imaging system using a wide-range dichroic mirror for simultaneous four-color single-molecule detection.

A dual-view imaging system for simultaneous four-color single-molecule (SM) detection was developed. As for the detection procedure, four species of SM fluorophores, namely, Alexa 488, 555, 647, and 680, are immobilized on different slides and excited by evanescent-wave illumination. Fluorescence emitted from an SM fluorophore is split by a wide-range dichroic mirror (WR DM) in a dual-view optics and imaged as two SM fluorescence spots (SM spots) on an electron-multiplying charge-coupled device (EM-CCD) at 100 Hz. The transmittance of the WR DM changes gradually over the wavelength range of 500 to 700 nm so that the signal ratios of the two SM spots for the four fluorophore species differ. A method for classifying SM fluorophores into four species in accordance with their signal ratios was developed. It was used to classify 597 SM fluorophores at an accuracy of above 98% for all the species. This accuracy is comparable to that of a conventional four-color SM detection system. To classify four species, the conventional system disperses SM fluorescence with a prism and provides an elongated SM spot that uses more pixels of an EM-CCD chip than that of the developed system. The developed system can thus detect 1.5-fold more SM spots with the same-size EM-CCD chip, so it can achieve 1.5-fold higher throughput. Moreover, the developed system is based on a simple and practical approach, namely, replacing an ordinary dichroic mirror in a commercially available dual-view optics with a WR DM. This replacement transforms a dual-view imaging system for two-color detection into a system for four-color detection. The developed system is suitable for detection systems of next-generation DNA sequencers and DNA microarray-chip analyzers.

Prism-based spectral imaging of single-molecule fluorescence from gold-nanoparticle/fluorophore complex.

A wavelength-calibration method for prism-based spectral imaging of single-molecule (SM) fluorescence was developed. With this method, a wavelength reference is provided by photoluminescence from 50-nm-diameter gold nanoparticles (AuNPs) binding with fluorophores. The AuNPs each bound with a SM fluorophore, either Alexa488 or Cy3, to form AuNP/fluorophore complexes in tris-HCl buffer. Each complex was immobilized on a silica slide and then excited by total-internal-reflection illumination to make it emit SM fluorescence and AuNP photoluminescence. The portion of the AuNP photoluminescence transmitted by a band-pass filter gives the wavelength reference. A spectral-imaging system composed of a prism-based spectroscope (with a reciprocal dispersion of about 4 nm/µm) and a charge-coupled device with 6.45-µm-square pixels was used to obtain an SM-fluorescence spectrum and a wavelength-reference spectrum. Through smoothed differentiation of these two spectra, the peak location of the former in relation to the latter was determined with subpixel precision. After that, the SM fluorophore was classified as either Alexa488 or Cy3 according to the peak location. The error rate of the classification was estimated to be only 0.3%.

Simultaneous four-color imaging of single molecule fluorophores using dichroic mirrors and four charge-coupled devices.

We developed a total-internal-reflection (TIR) fluorescence microscopy using three dichroic mirrors and four charge-coupled devices (CCDs) to detect simultaneously four colors of single-molecule (SM) fluorophores. Four spectrally distinct species of fluorophores (Alexa 488, Cy3, Cy5, or Cy5.5) were each immobilized on a different fused silica slide. A species of fluorophores on the slide was irradiated simultaneously, by two excitation beams from an Ar ion laser (488 and 514.5 nm) and a diode laser (642 nm) through TIR on the slide surface. Fluorescence emitted from the fluorophores was spectrally resolved into four components by the dichroic mirrors, and four images were generated from them simultaneously and continuously, with the four CCDs at a rate of 10 Hz. A series of images was thus obtained with each CCD. Fluorescence spots for a species were observed mainly in the series of images recorded by its respective-color CCD. In the first image in the series, we picked out the spots as continuous pixel regions that had the values greater than a threshold. Then we selected only those spots that exhibited single-step photobleaching and regarded them as SM fluorescence spots. Pixel values of SM fluorescence spots widely differed. Some SM fluorophores had pixel values smaller than the threshold, and were left unpicked. Assuming the pixel values of SM fluorescence spots differed with a Gaussian profile, we estimated the ratios of unpicked fluorophores to be less than 20% for all the species. Because of the spectral overlaps between species, we also observed cross-talk spots into CCDs other than the respective-color CCDs. These cross-talk SM fluorescence spots can be mistaken for correct species. We thus introduced the classification method and classified SM fluorescence spots into correct species in accordance with two kinds of four-dimensional signal vectors. The error rates of fluorophore classification were estimated to be less than 3.2% for all the species. Our system is suitable for the biological studies that desire to simultaneously monitor the four colors of SM fluorophores.

Fluorescence detection of guanine-adenine transition by a hydrogen bond forming small compound.

In combination with abasic site-containing oligodeoxynucleotides, 2-amino-4-oxopteridine (pterin) can selectively recognize guanine base over other nucleobases accompanied by fluorescence quenching, which allows clear detection of a guanine-adenine transition with the naked eye.