Analysis of Bacillus cereus toxicity using PCR, ELISA and a lateral flow device.

AIMS: The aim of this study was to evaluate the performance of immunodetection methods and PCR analysis of enterotoxigenic Bacillus cereus strains. METHODS AND RESULTS: Eighty-eight enterotoxigenic B. cereus group strains linked to food-borne outbreaks and illnesses were studied with 30 exclusivity nonenterotoxigenic strains including Bacillus amyoliquifaciens, Bacillus subtilis, Staphylococcus aureus, Salmonella and Escherichia coli for this assessment. The PCR results showed 80% agreement with immunoassays for the Nhe target and 84% for the Hbl product. All exclusivity strains were PCR and serologically negative. CONCLUSIONS: PCR has proven to be a valuable tool when used in conjunction with immunoassays to quickly identify enterotoxigenic B. cereus group strains. SIGNIFICANCE AND IMPACT OF THE STUDY: This study assessed the utility of rapid methods to characterize enterotoxigenic profiles of B. cereus group strains. The identification of enterotoxigenic bacteria and any associated toxins detected from food products is essential in food defense programs as public health officials search for methods to rapidly and accurately screen a global food supply.

Prevalence of enterotoxins and toxin gene profiles of Staphylococcus aureus isolates recovered from a bakery involved in a second staphylococcal food poisoning occurrence.

AIMS: The study objective was to characterize and analyse the distribution of enterotoxins and genes encoding enterotoxins in Staphylococcus aureus strains recovered from the 601 environment and ingredient samples obtained during multiple inspections of a bakery implicated in two separate staphylococcal food poisoning incidents. METHODS AND RESULTS: Staphylococcus aureus isolates were evaluated using serological assays for identification of classical staphylococcal enterotoxins (SEs) SEA-SEE and polymerase chain reaction for the detection of newly described SE and SE-like enterotoxin genes seg-seu. Pulsed field gel electrophoresis identified thirteen pattern types. During these investigations, a total of 585 environmental swabs and 16 raw ingredient samples were collected by investigators, 85 of which were confirmed to contain Staph. aureus; of those isolates, 95·3% (81/85) harboured enterotoxin genes and 4·7% (4/85) carried newly described SE and SE-like enterotoxin genes in the absence of classical enterotoxins. CONCLUSIONS: Our research demonstrates the prevalence and diversity of classical SEs and the probable underestimated impact of nonclassical SE and SE-like enterotoxins role in domestic staphylococcal food poisoning outbreaks. SIGNIFICANCE AND IMPACT OF THE STUDY: Given the abundance of SEs and SE-like toxins, these findings illustrate the utilization of PCR for enterotoxin gene identification and its significance in outbreak investigations.

Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst.

Waste water of copper mines and copper processing plant contains both copper and selenium ions with other contaminants. In this paper simultaneous photoreductive removal of copper (II) and selenium (IV) is studied for the first time using spherical binary oxide photocatalysts under visible light. All the synthesized materials are found to be mesoporous in nature with reasonably high surface area. Among a range of hole scavengers, only EDTA (ethylene diamine tetraacetic acid) and formic acid are found to be the most active for the reduction reaction. A comparative study is carried out using both the hole scavengers varying reaction time, concentration, pH etc. For a single contaminant, EDTA is found to be the best for Cu(II) reduction whereas formic acid is the best for Se(IV) reduction. In a mixed solution both EDTA and formic acid perform very well under visible light irradiation. Highest photocatalytic reduction in a mixed solution is observed at pH 3. Among all the synthesized materials, TiZr-10 performs as the best photocatalyst for both Cu(II) and Se(IV) reduction. However under UV light, Degussa P25 performs slightly better than TiZr-10. Present study shows that 100 ppm of mixed solution can be removed under visible light in 40 min of reaction using TiZr-10 as catalyst. Photodeposited material is found to be copper selenide rather than pure copper and selenium metal. This indicates that the waste water containing copper and selenium ions can be efficiently treated under visible or solar light.

Surfactant mediated synthesis of spherical binary oxides photocatalytic with enhanced activity in visible light.

Spherical silica and zirconia mixed titania and pure titania samples were prepared in presence of cetyltrimethylammonium bromide (CTAB) through controlled hydrolysis of corresponding metal alcoxides. Effect of surfactant amount and calcinations temperature on morphology, surface area and photocatalytic activity is studied using PXRD, SEM, FTIR, Solid state UV-vis spectroscopy and BET surface area. It is well observed that in presence of 2 mol% CTAB, uniform sized spherical oxide particles can be synthesized. However, increasing or decreasing the surfactant amount does not favor the spherical particle formation. Material synthesis in presence of CTAB not only helps in the spherical particle formation but also increases the surface area and visible light absorption. Studies on photocatalytic lead removal with respect to calcination temperature indicate that the calcination at 500 degrees C is most suitable for the best photocatalytic activity. Mixing of zirconia and silica helps in anatase phase stabilization even at 900 degrees C calcination. Accordingly low decrease in surface area even at 900 degrees C calcination is observed. Due to the phase stabilization and higher surface area binary oxide materials showed comparatively better photocatalytic activity even after calcination at 900 degrees C. So it can be concluded that present synthesis approach can produce uniform sized spherical binary oxide materials with better photocatalytic activity in visible light.

Effect of UV and visible light on photocatalytic reduction of lead and cadmium over titania based binary oxide materials.

Uniform sized silica and zirconia mixed titania samples were prepared in presence of a surfactant (CETAB) using controlled hydrolysis of corresponding metal alkoxides. Photocatalytic activity towards reduction of lead and cadmium metal in aqueous solution was evaluated both in UV and visible light in a 100 ml capacity reactor. In particular mixing of 10 wt% silica with titania not only increases the surface area of the material but also increases the photocatalytic activity in UV light. Whereas mixing of zirconia with titania proved to be beneficial for visible light reaction. However, addition of hole scavenger increases the activity many folds and complete removal of Pb(2+) and Cd(2+) was possible in 60 min of reaction using synthesized catalysts. Among all the organic hole scavengers used, sodium formate is found to be the most active one. Interestingly quite high metal removal (89%) is also observed in presence of visible light within 60 min of reaction. Thus the above study indicates that the presence of certain oxides in low quantity (10 wt%) with titania can facilitates the photocatalytic process selectively in UV as well as visible light.