In-line particle size measurement based on image analysis in a fully continuous granule manufacturing line for rapid process understanding and development.

The present paper serves as a demonstration how an in-line PAT tool can be used for rapid and efficient process development in a fully continuous powder to granule line consisting of an interconnected twin-screw wet granulator, vibrational fluid bed dryer, and a regranulating mill. A new method was investigated for the periodic in-line particle size measurement of high mass flow materials to obtain real-time particle size data of the regranulated product. The system utilises a vibratory feeder with periodically altered feeding intensity in order to temporarily reduce the mass flow of the material passing in front of the camera. This results in the drastic reduction of particle overlapping in the images, making image analysis a viable tool for the in-line particle size measurement of high mass-flow materials. To evaluate the performance of the imaging system, the effect of several milling settings and the liquid-to-solid ratio was investigated on the product's particle size in the span of a few hours. The particle sizes measured with the in-line system were in accordance with the expected trends as well as with the results of the off-line reference particle size measurements. Based on the results, the in-line imaging system can serve as a PAT tool to obtain valuable real-time information for rapid process development or quality assurance.

Videometric mass flow control: A new method for real-time measurement and feedback control of powder micro-feeding based on image analysis.

The present paper reports the first monitoring and control of ultra-low dose powder feeding using a camera image-based mass flow measurement system. Caffeine was fed via a single-screw microfeeder as a model active pharmaceutical ingredient (API). The mass, mass flow and sizes of the particles were successfully monitored in real-time by the developed videometric system consisting of a high-speed process camera coupled with an image analysis software. The system was also tested in feedback control mode to automatically reach the desired mass flow values by adjusting the feeder speed based on the mass flow measured by the image analysis system. Based on these features, the developed videometric system can serve as a multi-purpose PAT-tool and can provide valuable real-time information about the process which is indispensable for modern continuous pharmaceutical manufacturing.