Effects of propylene glycol alginate and sucrose esters on the physicochemical properties of modified starch-stabilized beverage emulsions.

This study was conducted to investigate the effect of main emulsion components namely, modified starch, propylene glycol alginate (PGA), sucrose laurate and sucrose stearate on creaming index, cloudiness, average droplet size and conductivity of soursop beverage emulsions. Generally, the use of different emulsifiers or a mixture of emulsifiers has a significant (p < 0.05) effect on the response variables studied. The addition of PGA had a significant (p < 0.05) effect on the creaming index at 55 °C, while PGA-stabilized (PGA1) emulsions showed low creaming stability at both 25 °C and 55 °C. Conversely, the utilization of PGA either as a mixture or sole emulsifier, showed significantly (p < 0.05) higher cloudiness, as larger average droplet size will affect the refractive index of the oil and aqueous phases. Additionally, the cloudiness was directly proportional to the mean droplet size of the dispersed phase. The inclusion of PGA into the formulation could have disrupted the properties of the interfacial film, thus resulting in larger droplet size. While unadsorbed ionized PGA could have contributed to higher conductivity of emulsions prepared at low pH. Generally, emulsions prepared using sucrose monoesters or as a mixture with modified starch emulsions have significantly (p < 0.05) lower creaming index and conductivity values, but higher cloudiness and average droplet size.

Solid-phase microextraction for determining twelve orange flavour compounds in a model beverage emulsion.

Solid-phase microextraction (SPME) coupled to gas chromatography has been applied for the headspace analysis (HS) of 12 target flavour compounds in a model orange beverage emulsion. The main volatile flavour compounds studied were: acetaldehyde, ethyl acetate, alpha-pinene, ethyl butyrate, beta-pinene, myrcene, limonene, gamma-terpinene, octanal, decanal, linalool and citral (neral plus geranial). After screening the fibre type, the effect of other HS-SPME variables such as adsorption temperature (25-55 degrees C), extraction time (10-40 min), sample concentration (1-100% w/w), sample amount (5-10 g) and salt amount (0-30% w/w) were determined using a two-level fractional factorial design (2(5-2)) that was expanded further to a central composite design. It was found that an extraction process using a carboxen-polydimethylsiloxane fibre coating at 15 masculineC for 50 min with 5 g of diluted emulsion 1% (w/w) and 30% (w/w) of sodium chloride under stirring mode resulted in the highest HS extraction efficiency. For all volatile flavour compounds, the linearity values were accurate in the concentration ranges studied (r(2) > 0.97). Average recoveries that ranged from 90.3 to 124.8% showed a good accuracy for the optimised method. The relative standard deviation for six replicates of all volatile flavour compounds was found to be less than 15%. For all volatile flavour compounds, the limit of detection ranged from 0.20 to 1.69 mg/L.

Modeling the relationship between the main emulsion components and stability, viscosity, fluid behavior, zeta-potential, and electrophoretic mobility of orange beverage emulsion using response surface methodology.

The possible relationships between the main emulsion components (namely, Arabic gum, xanthan gum, and orange oil) and the physicochemical properties of orange beverage emulsion were evaluated by using response surface methodology. The physicochemical emulsion property variables considered as response variables were emulsion stability, viscosity, fluid behavior, zeta-potential, and electrophoretic mobility. The independent variables had the most and least significant ( p < 0.05) effect on viscosity and zeta-potential, respectively. The quadratic effect of orange oil and Arabic gum, the interaction effect of Arabic gum and xanthan gum, and the main effect of Arabic gum were the most significant ( p < 0.05) effects on turbidity loss rate, viscosity, viscosity ratio, and mobility, respectively. The main effect of Arabic gum was found to be significant ( p < 0.05) in all response variables except for turbidity loss rate. The nonlinear regression equations were significantly ( p < 0.05) fitted for all response variables with high R (2) values (>0.86), which had no indication of lack of fit. The results indicated that a combined level of 10.78% (w/w) Arabic gum, 0.56% (w/w) xanthan gum, and 15.27% (w/w) orange oil was predicted to provide the overall optimum region in terms of physicochemical properties studied. No significant ( p > 0.05) difference between the experimental and the predicted values confirmed the adequacy of response surface equations.

Determination of organochlorine and pyrethroid pesticides in fruit and vegetables using solid phase extraction clean-up cartridges.

A method to determine six organochlorine and three pyrethroid pesticides in grape, orange, tomato, carrot and green mustard based on solvent extraction followed by solid phase extraction (SPE) clean-up is described. The pesticides were spiked into the sample prior to analysis, extracted with ethyl acetate, evaporated and reconstituted with a solvent mixture of acetone:n-hexane (3:7). Three different sorbents (Strong Anion Exchanger/Primary Secondary Amine (SAX/PSA), Florisil and C18) were used for the clean-up step. Pesticides were eluted with 5mL of acetone:n-hexane (3:7, v/v) and determined by gas chromatography and electron-capture detection (GC-ECD). SAX/PSA was the sorbent, which provided chromatograms with less interference and the mean recoveries obtained were within 70-120% except for captafol. The captafol recoveries for grape were within acceptable range with C18 clean-up column.