RESUMO
Optofluidic devices are capable of detecting single molecules, but greater sensitivity and specificity is desired through hydrodynamic focusing (HDF). Three-dimensional (3D) hydrodynamic focusing was implemented in 10-µm scale microchannel cross-sections made with a single sacrificial layer. HDF is achieved using buffer fluid to sheath the sample fluid, requiring four fluid ports to operate by pressure driven flow. A low-pressure chamber, or pit, formed by etching into a substrate, enables volumetric flow ratio-induced focusing at a low flow velocity. The single layer design simplifies surface micromachining and improves device yield by 1.56 times over previous work. The focusing design was integrated with optical waveguides and used in order to analyze fluorescent signals from beads in fluid flow. The implementation of the focusing scheme was found to narrow the distribution of bead velocity and fluorescent signal, giving rise to 33% more consistent signal. Reservoir effects were observed at low operational vacuum pressures and a balance between optofluidic signal variance and intensity was achieved. The implementation of the design in optofluidic sensors will enable higher detection sensitivity and sample specificity.
RESUMO
3D hydrodynamic focusing was implemented with channel cross-section dimensions smaller than 10 µm. Microchannels were formed using sacrificial etching of two photoresist layers on a silicon wafer. The photoresist forms a plus-shaped prismatic focusing fluid junction which was coated with plasma-enhanced chemical-vapor-deposited oxide. Buffer fluid carried to the focusing junction envelopes an intersecting sample fluid, resulting in 3D focusing of the sample stream. The design requires four fluid ports and operates across a wide range of fluid velocities through pressure-driven flow. The focusing design was integrated with optical waveguides to interrogate fluorescing particles and confirm 3D focusing. Particle diffusion away from a focused stream was characterized.
