Impacts of COVID-19 pandemic on environment, society, and food security.

Coronavirus disease (COVID)-19 is a viral and transferable disease caused by severe respiratory syndrome-coronavirus-2. It can spread through breathing droplets in human beings. It caused 5.32 million deaths around the world at the end of 2021. COVID-19 has caused several positive impacts as well, such as a reduction in air, water, and noise pollution. However, its negative impacts are by far critical such as increased death rate, increased release of microcontaminants (pesticides, biocides, pharmaceuticals, surfactants, polycyclic aromatic hydrocarbons (PAHs), flame retardants, and heavy metals), increased biomedical waste generation due to excessive use of safety equipment and its disposal, and municipal solid waste generation. Environmental pollution was significantly reduced due to lockdown during the COVID-19 period. Therefore, the quality of air and water improved. COVID-19 affected all sections of the population, particularly the most vulnerable members of society, and thus pushed more people into poverty. At the world level, it increased risks to food safety by increasing prices and lowering revenues, forcing households to reduce their food consumption in terms of quantity and quality. COVID-19 also upset various exercises e.g., horticulture, fisheries, domesticated animals, and agribusiness hence prohibiting the development of merchandise for poor-country ranchers. Most of the patients can self-recover from COVID-19 if they do not have any other diseases like high blood pressure, diabetes, and heart problems. Predictably, the appropriate execution of the proposed approaches (vaccination, wearing face masks, social distancing, sustainable industrialization) is helpful for worldwide environmental sustainability.

Zeolite amendment reduces lead accumulation and improves growth and yield in tomato plants irrigated with sewage water.

Although sewage water (SW) is a source of nutrients, it also causes heavy metal accumulation in soil; especially, lead (Pb+) contamination of soil is a serious concern in agriculture. Soil contaminants limit the bioavailability of nutrients to plants. So, they affect plant growth and produce quality. Therefore, a pot experiment was conducted to investigate the effect of zeolite soil amendment on the accumulation of Pb+ in tomato crop grown with SW irrigation. The pot media of SW-irrigated plants was amended with different concentrations of zeolite, viz., 0.75%, 1.50%, and 2.25%. The results showed that the application of 0.75% zeolite increased leaf area, plant height, fruit number, and plant fresh and dry biomasses by 37%, 17%, 14%, 24%, and 7% compared to freshwater irrigation. Moreover, the lowest zeolite dose also led to higher chlorophyll content (68.02 SPAD) compared to SW-irrigated plants (55.13 SPAD). Similarly physiological traits, such as A, gs, and E, were higher (17.68 µmol m-2 s-1, gs 0.28 mmol m-2 s-1, and 7.88 mmol m-2 s-1, respectively) in 0.75% zeolite-treated plants than in SW-irrigated plants (12.99 µmol m-2 s -1, 0.19 mmol m-2 s-1, and 7.00 mmol m-2 s -1, respectively). On the contrary, a reduced level of hydrogen peroxide and malondialdehyde and decreased activity of antioxidant enzymes were observed in low-dose zeolite applied plants. Zeolite reduced Pb+ accumulation in tomato plants as compared to SW-irrigated plants, whereby Pb accumulation in the fruits of SW-irrigated plants was 80% more than those of zeolite + SW-treated plants. Conclusively, this study has revealed the improvement in morphological and physiological growth attributes of the SW-irrigated tomato plant in response to zeolite application.

Using space-time scan statistic for studying the effects of COVID-19 in Punjab, Pakistan: a guideline for policy measures in regional agriculture.

Pakistan is included in top 50 countries which are estimated to face serious agriculture and food deficiency related challenges due to the worldwide pandemic coronavirus 2019 (COVID-19). The aim of this study was to evaluate the effects of COVID-19 on food supply chain and agriculture in Punjab, Pakistan, by using space-time scan statistic (STSS). A survey was conducted at 720 points in different districts of the province. The STSS detected "active" and emerging clusters that are current at the end of our study area-particularly, 17 clusters were formed while adding the updated case data. Software ArcGIS 10.3 was used to find relative risk (RR) values; the maximum RR value was found to be 42.19 and maximum observed cases 53,265 during June 15-July 1, 2020. It was not always necessary that if the number of active cases in Punjab increased, there should be higher relative risk for more number of districts and vice versa. Due to the highest number of cases of COVID-19 and RR values during July, mostly farmers faced many difficulties during the cultivation of cotton and rice. Mostly farmers (72%) observed increase in prices of inputs (fertilizers and pesticides) during lockdown. If the supply chain of agriculture related inputs is disturbed, farmers may find it quite difficult to access markets, which could result in a decline in production and sales of crops and livestock in study area. It is suggested that to protect the food security and to decrease the effect of the lockdown, Punjab government needs to review food policy and analyse how market forces will respond to the imbalanced storage facilities and capacity, supply and demand and price control of products. The findings of this study can also help policy-makers to formulate an effective food security and agriculture adaptation strategy.

Assessment of land use/land cover changes and its effect on land surface temperature using remote sensing techniques in Southern Punjab, Pakistan.

Land surface temperature (LST) is defined as a phenomenon which shows that microclimate of an urban system gets heated much faster than its surrounding rural climates. The expansion of buildings has a noteworthy influence on land use/land cover (LULC) due to conversion of vegetation land into commercial and residential areas and their associated infrastructure by which LST is accelerated. The objective of the research was to study the impact of changes in LULC on LST of Southern Punjab (Pakistan) through remote sensing (RS) data. Landsat images of 30-year duration (1987, 1997, 2007 and 2017) were employed for identifying vegetation indices and LST in the study region. These images also helped to work out normalized difference water index (NDWI) and normalized difference built-up index (NDBI) maps. There was an increase from 29620 (3.63 %) to 88038 ha (10.8 %) in built-up area over the 30 years. LST values were found in the range 12-42 °C, 11-44 °C, 11-45 °C and 11-47 °C in the years 1987, 1997, 2007 and 2017, respectively. Regression coefficients (R2) 0.81, 0.78, 0.84 and 0.76 were observed between NDVI and LST in the corresponding years respectively. Our study showed that NDVI and NDWI were negatively correlated with less LST; however, NDBI showed positive correlation with high LST. Our study gives critical information of LULC and LST and will be a helpful tool for policy makers for developing effective policies in managing land resources.

Evaluating the Impact of Nitrogen Application on Growth and Productivity of Maize Under Control Conditions.

Climatic conditions significantly affect the maize productivity. Among abiotic factors, nitrogen (N) fertilizer and temperature are the two important factors which dominantly affect the maize (Zea mays L.) production during the early crop growth stages. Two experiments were conducted to determine the impact of N fertilizer and temperature on the maize growth and yield. In the first experiment, the maize hybrids were screened for their sensitivity to temperature variations. The screening was based on the growth performance of the hybrids under three temperatures (T 1 = ambient open-air temperature, T 2 = 1°C higher than the ambient temperature, and T 3 = 1°C lower than the ambient temperature) range. The results showed that an increase in temperature was resulted less 50% emergence and mean emergence (4.1 and 6.3 days, respectively), while emergence energy and full emergence were higher (25.4 and 75.2%, respectively) under the higher temperature exposure. The results showed that Syngenta 7720 and Muqabla S 25W87 were temperature tolerant and sensitive maize hybrids, respectively. The second experiment was carried out to study the response of the two selected maize hybrids (Syngenta 7720 and Muqabla S 25W87) to four N fertilizer applications. The results revealed that the maximum N use efficiency (19.5 kg kg-1) was achieved in maize hybrids with low N application (75 kg N ha-1 equivalent to 1.13 g N plant-1). However, the maximum maize grain yield (86.4 g plant-1), dry weight (203 g plant-1), and grain protein content (15.0%) were observed in maize hybrids that were grown with the application of 300 kg N ha-1 (equivalent to 4.52 g N plant-1). Therefore, it is recommended that the application of 300 kg N ha-1 to temperature tolerant maize hybrid may be considered best agricultural management practices for obtaining optimum maize grain yield under present changing climate.

Exploring the potential effect of Achnatherum splendens L.-derived biochar treated with phosphoric acid on bioavailability of cadmium and wheat growth in contaminated soil.

Biochar remediation efficiency could be enhanced through numerous treatments such as acids treatment. Still, there has little work done on H3PO4-treated biochar particularly biochar derived from Achnatherum splendens L. feedstock. Therefore, the present study has been conducted to further explore the potential effect of A. splendens L.-derived biochar treated with H3PO4 on bioavailability of Cd and wheat growth in Cd contaminated soil. Phosphoric acid and untreated biochar each applied at the rate of 1% and 2% to Cd contaminated/spiked soil in pots and having one contaminated/spiked control without biochars amendment. The results show that 2% phosphoric acid-treated biochar has the most significant increase in plant height, shoot dry weight, and grain yield of wheat as compared to contaminated control. As compared to contaminated control, maximum improvement in total chlorophyll contents, photosynthetic rate, transpiration rate, and stomatal conductance occurred with 2% phosphoric acid-treated biochar. The 2% phosphoric acid-treated biochar also declined bioavailable Cd in soil by 53%, and its accumulation in shoot and grain by 65% and 90%, respectively, compared to contaminated control. Overall, phosphoric acid-treated biochar most effectively immobilized Cd in soil and reducing its uptake and translocation to grains. Therefore, A. splendens L.-derived biochar treated with phosphoric acid could be successfully utilized for remediation of contaminated soil.

Zinc in soil-plant-human system: A data-analysis review.

Zinc (Zn) plays an important role in the physiology and biochemistry of plants due to its established essentiality and toxicity for living beings at certain Zn concentration i.e., deficient or toxic over the optimum range. Being a vital cofactor of important enzymes, Zn participates in plant metabolic processes therefore, alters the biophysicochemical processes mediated by Zn-related enzymes/proteins. Excess Zn can provoke oxidative damage by enhancing the levels of reactive radicals. Hence, it is imperative to monitor Zn levels and associated biophysicochemical roles, essential or toxic, in the soil-plant interactions. This data-analysis review has critically summarized the recent literature of (i) Zn mobility/phytoavailability in soil (ii) molecular understanding of Zn phytouptake, (iii) uptake and distribution in the plants, (iv) essential roles in plants, (v) phyto-deficiency and phytotoxicity, (vi) detoxification processes to scavenge Zn phytotoxicity inside plants, and (vii) associated health hazards. The review especially compares the essential, deficient and toxic roles of Zn in biophysicochemical and detoxification processes inside the plants. To conclude, this review recommends some Zn-related research perspectives. Overall, this review reveals a thorough representation of Zn bio-geo-physicochemical interactions in soil-plant system using recent data.

Exploring the potential of moringa leaf extract as bio stimulant for improving yield and quality of black cumin oil.

The history of plants to be utilized as medicines is thousands of years old. Black cumin is one of the most widely examined plant possessing naturally occurring compounds with antimicrobial potential. Foliar application of growth stimulators is a successful strategy to enhance yield and quality in many crops. A field study was planned to apply growth stimulator like moringa leaf extract on black cumin crop grown under field conditions using RCB design with three replications. All other agronomic inputs and practices were uniform. The treatments were moringa leaf extract concentrations (10%, 20%), growth stages (40 days after sowing, 80 DAS, 120 DAS, 40 + 80 DAS, 40 + 120 DAS, 80 + 120 DAS, 40 + 80 + 120 days after sowing) and two controls unsprayed check (i.e. no moringa leaf extract, no water) and sprayed check (no moringa leaf extract + water). Application of 20% moringa leaf extract at stage-7 (40 + 80 + 120 days after sowing) had significantly increased plant height, branches plant-1, essential oil content, fixed oil content, peroxidase value and iodine value of black cumin oil over unsprayed control. Application of moringa leaf extract showed maximum results and improves growth and yield of black cumin when applied at 40 + 80 + 120 days after sowing. As this study was only conducted using moringa leaf extract, it is advisable to conduct an experiment with various bio stimulants along with fertilizer combinations and growth regulators to check their synergistic effects for more reliable and acceptable recommendations in future.

Synthesis of silver nanoparticles using Plantago lanceolata extract and assessing their antibacterial and antioxidant activities.

Silver nanoparticles (Ag. NPs) have shown a biological activity range, synthesized under different environment-friendly approaches. Ag. NPs were synthesized using aqueous crude extract (ACE) isolated from Plantago lanceolata. The ACE and Ag. NPs were characterized and assessed their biological and antioxidant activities. The existence of nanoparticles (NPs) was confirmed by color shift, atomic force microscopy (AFM), and UV-Vis's spectroscopy. The FT-IR analysis indicated the association of biomolecules (phenolic acid and flavonoids) to reduce silver (Ag+) ions. The SEM study demonstrated a sphere-shaped and mean size in the range of 30 ± 4 nm. The EDX spectrum revealed that the Ag. NPs were composed of 54.87% Ag with 20 nm size as identified by SEM and TEM. AFM has ended up being exceptionally useful in deciding morphological elements and the distance across of Ag. NPs in the scope of 23-30 nm. The TEM image showed aggregations of NPs and physical interaction. Ag. NPs formation also confirmed by XPS, DRS and BET studies. Ag. NPs showed efficient activity as compared to ACE, and finally, the bacterial growth was impaired by biogenic NPs. The lethal dose (LD50) of Ag. NPs against Agrobacterium tumefaciens, Proteus vulgaris, Staphylococcus aureus, and Escherichia coli were 45.66%, 139.71%, 332.87%, and 45.54%, with IC50 (08.02 ± 0.68), (55.78 ± 1.01), (12.34 ± 1.35) and (11.68 ± 1.42) respectively, suppressing the growth as compared to ACE. The antioxidant capacity, i.e., 2,2-diphenyl-1-picrylhydrazyl (DPPH) of Ag. NPs were assayed. ACE and Ag. NPs achieved a peak antioxidant capacity of 62.43 ± 2.4 and 16.85 ± 0.4 µg mL-1, compared to standard (69.60 ± 1.1 at 100 µg mL-1) with IC50 (369.5 ± 13.42 and 159.5 ± 10.52 respectively). Finally, the Ag. NPs synthesized by P. lanceolata extract have an excellent source of bioactive natural products (NP). Outstanding antioxidant, antibacterial activities have been shown by NPs and can be used in various biological techniques in future research.

Hydrogeochemical and health risk investigation of potentially toxic elements in groundwater along River Sutlej floodplain in Punjab, Pakistan.

Understanding groundwater quality and hydrogeochemical behavior is important because consumption of the potentially toxic elements (PTEs)-contaminated drinking water may induce several health problems for humans and animals. In the current study, we examined the potential groundwater contamination with various PTEs (arsenic, As; cadmium, Cd; copper, Cu; manganese; Mn) and the PTEs-induced health risk. Groundwater (n = 111) was characterized for total As, Cd, Cu, and Mn concentrations and other water quality attributes along the River Sutlej floodplain of Punjab, Pakistan. Results revealed that groundwater, which is used for drinking purpose, contained high concentrations of As and Cd (mean As: 33 µg/L, mean Cd: 3 µg/L), exceeding 100% and 32% than the World Health Organization's safe limits (10 and 3 µg/L, respectively) in drinking water. The other water quality attributes (i.e., EC, HCO3, Cl and SO4) were also found above their safe limits in most of the wells. Hydrogeochemical data showed that groundwater was dominated with Na-SO4, Na-Cl, Ca/Mg-CO3 type saline water. The hazard quotient and cancer risk indices values calculated for As and Cd indicated potential threat (carcinogenic risk > 0.0001 and non-carcinogenic risk > 1.0) of drinking groundwater in the study area. This study shows that the groundwater along River Sutlej floodplain poses a health threat to the communities relying on it for drinking and irrigation due to high concentrations of As and Cd in water. Moreover, it is important to monitor groundwater quality in the adjacent areas along River Sutlej floodplain and initiate suitable mitigation and remediation programs for the safety of people's health in Punjab, Pakistan.

A review of soil carbon dynamics resulting from agricultural practices.

Literature related to the carbon cycle and climate contains contradictory results with regard to whether agricultural practices increase or mitigate emission of greenhouse gases (GHGs). One opinion is that anthropogenic activities have distinct carbon footprints - measured as total emissions of GHGs resulting from an activity, in this case, "agricultural operations". In contrast, it is argued that agriculture potentially serves to mitigate GHGs emissions when the best management practices are implemented. We review the literature on agricultural carbon footprints in the context of agricultural practices including soil, water and nutrient management. It has been reported that the management practices that enhance soil organic carbon (SOC) in arid and semi-arid areas include conversion of conventional tillage practices to conservation tillage approaches. We found that agricultural management in arid and semi-arid regions, which have specific characteristics related to high temperatures and low rainfall conditions, requires different practices for maintenance and restoration of SOC and for control of soil erosion compared to those used in Mediterranean, tropical regions. We recommend that in order to meet the global climate targets, quantification of net global warming potential of agricultural practices requires precise estimates of local, regional and global carbon budgets. We have conducted and present a case study for observing the development of deep soil carbon profile resulting from a 10-year wheat-cotton and wheat-maize rotation on semi-arid lands. Results showed that no tillage with mulch application had 14% (37.2 vs 43.3 Mg ha-1) higher SOC stocks in comparison to conventional tillage with mulch application. By implementing no tillage in conjunction with mulch application, lower carbon losses from soil can mitigate the risks associated with global warming. Therefore, it is necessary to reconsider agricultural practices and soil erosion after a land-use change when calculating global carbon footprints.

Carbon sequestration potential and soil characteristics of various land use systems in arid region.

Soils contain one of the largest carbon (C) pools in the biosphere with the greatest potential of C sequestration to mitigate climate change impacts. The present study aimed at comparing C sequestration potential of various land use systems including forestlands, croplands, agroforests, and orchards in the arid region of Pakistan. Soil samples from the layers of 0-20, 20-40, 40-60, and 60-80 cm depths were collected and analysed for soil physico-chemical properties namely texture, pH, EC, NPK-soil, organic matter (SOM), and soil organic C (SOC). Additionally, the above and below ground plant biomass and C contents were estimated. Results revealed that the highest C sequestration potential (64.54 Mg ha-1) was in the above ground biomass of forest land and the lowest (33.50 Mg ha-1) in cropland. The below ground plant biomass at 0-20 cm soil depth was 14.09, 12.38, 11.78, 11.76, and 10.92 Mg ha-1 for forest land, mango orchards, agroforests, citrus orchards and cropland, respectively. The respective values in case of total C content were, 6.84, 6.79, 6.10, 5.69 Mg ha-1. Irrespective to the soil depth, below ground biomass and total C followed the order: forest land > mango orchard > citrus orchard > agroforests > crop lands. It is concluded that the forest land have greater potential for C sequestration than the other land use systems studied in the arid region of Pakistan. Therefore, in order to cope up with climate change disasters in Pakistan the massive reforestation project - named the Billion Tree Tsunami of the Government of Pakistan will prove beneficial.

Using GIS tools to detect the land use/land cover changes during forty years in Lodhran District of Pakistan.

Land use/land cover (LULC) change has serious implications for environment as LULC is directly related to land degradation over a period of time and results in many changes in the environment. Monitoring the locations and distributions of LULC changes is important for establishing links between regulatory actions, policy decisions, and subsequent LULC activities. The normalized difference vegetation index (NDVI) has the potential ability to identify the vegetation features of various eco-regions and provides valuable information as a remote sensing tool in studying vegetation phenology cycles. Similarly, the normalized difference built-up index (NDBI) may be used for quoting built-up land. This study aims to detect the pattern of LULC, NDBI, and NDVI change in Lodhran district, Pakistan, from the Landsat images taken over 40 years, considering four major LULC types as follows: water bodies, built-up area, bare soil, and vegetation. Supervised classification was applied to detect LULC changes observed over Lodhran district as it explains the maximum likelihood algorithm in software ERDAS imagine 15. Most farmers (46.6%) perceived that there have been extreme changes of onset of temperature, planting season, and less precipitation amount in Lodhran district in the last few years. In 2017, building areas increased (4.3%) as compared to 1977. NDVI values for Lodhran district were highest in 1977 (up to + 0.86) and lowest in 1997 (up to - 0.33). Overall accuracy for classification was 86% for 1977, 85% for 1987, 86% for 1997, 88% for 2007, and 95% for 2017. LULC change with soil types, temperature, and NDVI, NDBI, and slope classes was common in the study area, and the conversions of bare soil into vegetation area and built-up area were major changes in the past 40 years in Lodhran district. Lodhran district faces rising temperatures, less irrigation water, and low rainfall. Farmers are aware of these climatic changes and are adapting strategies to cope with the effects but require support from government.

Developing the first halophytic turfgrasses for the urban landscape from native Arabian desert grass.

Climate change is occurring and is influencing biological systems through augmented temperatures, more inconstant precipitation, and rising CO2 in the atmosphere. For sustainable landscaping, it was essential to assess the diversity of native/wild grasses and their suitability for turf and to combat the salinity problem in the region. For this purpose, a native halophytic grass, Aeluropus lagopoides, was investigated by conducting mowing tests on its ecotypes during the year 2014-2016 under desert climatic conditions. The research was carried out in two phases, i.e. Phase-I was for collection and establishment of ecotypes from various parts of UAE, while in Phase-II, mowing tests were conducted. During mowing tests, 50 ecotypes of A. lagopoides were given various mowing treatments (i.e. they were cut back at 1-, 2-, 3-, 4- and 5-cm heights) in field conditions. Significant differences were found among various ecotypes for different agronomic parameters such as ground cover, canopy stiffness, leaf number, clippings fresh and dry weights and internode length. Overall, the grass exhibited better performance at mowing heights of 3 and 4 cm, which are the standard mowing heights for turfgrasses. Ecotypes FA5, RA3, RUDA2, RUDA7 and RUADA1 of A. lagopoides showed the best performance against mowing shock and became the candidates for the turfgrass varieties from the native Arabian flora.

The potential applications of picotechnology in biomedical and environmental sciences.

Picotechnology development in vast disciplines is mainly attributed to the research and development (R and D) on nanotechnology. Being a parent technology, nanotechnology is the cornerstone of picotechnology. Like nanotechnology, the reference standard for picotechnology is nature, the cellular and subcellular functioning. Some studies have highlighted that the functional margin of similar type of molecules at picoscale (10-12) goes higher than at nanoscale (10-9). In this review, the potential applications of picotechnology have been evaluated especially in the disciplines of biomedical and environmental sciences. Extended surface area and improved electrical, chemical, optical, and mechanical properties make picotechnological products even better than nanomaterials. The fundamental objective of this study is to bring the attention of the scientific world towards the picoscale interventions and to highlight the wide scope of picotechnology as a newly emerging technology with applications in numerous sectors. Picotechnology has made it possible to measure very small structure in advance biomedical and environmental sciences studies. Adequate developments in picotechnology will certainly change human lives in near future because it will make possible for the research world to dive into systems and structures on picoscale. It will render a platform through which explorers can travel into ultra-small areas, which will lead to the creation of new dimensions as well as new opportunities. Eventually, in future, the picotechnology will become smaller enough to give birth to femtotechnology (10-15) in real-world applications.

Growth and physiological response of spinach to various lithium concentrations in soil.

Lithium (Li) exploitation for industrial and domestic use is resulting in a buildup of the element in various environmental components that results in potential toxicity to living systems. Therefore, a soil culture experiment was conducted to evaluate the effects of increasing concentration of Li (0, 20, 40, 60, and 80 mg kg-1 soil) on spinach growth, the effects of Li uptake, and its effects on various physiological attributes of the crop. The results showed that lower levels of Li in soil (20 mg Li kg-1) improve the growth of spinach plants, while a higher concentration of applied Li enhanced the pigment contents. Higher concentrations of Li in soil interfered with potassium and calcium uptake in plants. Moreover, increasing Li concentration resulted in higher activities of antioxidant enzymes activity in spinach shoots. From these results, it is concluded that spinach shoot accumulated higher concentrations of Li without showing any visual toxicity symptoms. Therefore, the study concludes that Li ion was mostly deposited in leaves rather than in roots which may cause potential human health risk on the consumption of Li-contaminated plants. Therefore, the cultivation of leafy vegetables in Li-affected soils should be avoided to reduce the potential human health risks.

Trends of electronic waste pollution and its impact on the global environment and ecosystem.

Electronic waste (e-waste) is used for all electronic/electrical devices which are no more used. Conventionally, waste management policies are desfighandle the traditional waste. Although e-waste contains toxic materials, however, its management is rarely focused by policy makers; therefore, its negative impact on the global environment, ecosystem, and human health is aggravated. The review outlines the categories of e-waste materials, major pollutants including ferrous/non-ferrous metals, plastics, glass, printed circuit boards, cement, ceramic, and rubber beside, some valuable metals (such as copper, silver, gold, platinum). Toxic elements from e-waste materials, released in the air, water, and soil, include arsenic, cadmium, chromium, mercury, and lead, causing pollution. Although their roles in biological systems are poorly identified, however, they possess significant toxic and carcinogenic potential. It is therefore critical to monitor footprint and device strategies to address e-waste-linked issues from manufacturing, exportation, to ultimate dumping, including technology transmissions for its recycling. This review traces a plausible link among e-waste condition at a worldwide dimension, as far as settlement procedures to keep it secure and carefully monitored when traded. Their fate in the three spheres of the earth, i.e., water, soil, and air, impacts human health. The strategies and regulation to handle e-waste generation at the global level have been discussed. Graphical abstract .