Optimising brain age estimation through transfer learning: A suite of pre-trained foundation models for improved performance and generalisability in a clinical setting.

Estimated age from brain MRI data has emerged as a promising biomarker of neurological health. However, the absence of large, diverse, and clinically representative training datasets, along with the complexity of managing heterogeneous MRI data, presents significant barriers to the development of accurate and generalisable models appropriate for clinical use. Here, we present a deep learning framework trained on routine clinical data (N up to 18,890, age range 18-96 years). We trained five separate models for accurate brain age prediction (all with mean absolute error ≤4.0 years, R2 ≥ .86) across five different MRI sequences (T2 -weighted, T2 -FLAIR, T1 -weighted, diffusion-weighted, and gradient-recalled echo T2 *-weighted). Our trained models offer dual functionality. First, they have the potential to be directly employed on clinical data. Second, they can be used as foundation models for further refinement to accommodate a range of other MRI sequences (and therefore a range of clinical scenarios which employ such sequences). This adaptation process, enabled by transfer learning, proved effective in our study across a range of MRI sequences and scan orientations, including those which differed considerably from the original training datasets. Crucially, our findings suggest that this approach remains viable even with limited data availability (as low as N = 25 for fine-tuning), thus broadening the application of brain age estimation to more diverse clinical contexts and patient populations. By making these models publicly available, we aim to provide the scientific community with a versatile toolkit, promoting further research in brain age prediction and related areas.

Antimicrobial Activity of Nanozirconium Oxide.

The goal behind this work is to prepare, characterize, and study the antimicrobial behavior of zirconia (ZrO2) nanoparticles (NPs). Various techniques, such as X-ray diffraction (XRD), were used for studying the mineralogical structure and crystal size. The microstructure and chemical composition of the prepared particles were analyzed using a scanning electron microscope attached with an energy-dispersive X-ray analysis (EDAX) unit. The antagonistic ability against several Gram-negative and Gram-positive bacteria, including Salmonella paratyphi, Pseudomonas aeruginosa, Alcaligenes aquatilis, Escherichia coli, Streptococcus pneumoniae, and Staphylococcus aureus, was assessed using the well diffusion method. The results of XRD and scanning electron microscopy (SEM) analyses revealed that the prepared material exhibited the phase of zirconium nanoparticles with particle sizes ranging between 40 and 75 nm. The antimicrobial test results demonstrated that the inhibitory effect increased with the increase of concentration. The inhibitory effect was more pronounced against Gram-positive bacteria, as indicated by the larger size of the inhibitory zone. At a 9% dimethyl sulfoxide (DMSO) concentration, the inhibitory zone had a diameter of 3.50 mm for S. aureus compared to a diameter of 3.40 mm for S. pneumoniae. The use of zirconium oxide nanoparticles reduced the diameter of the inhibitory zone when tested against S. aureus at a 3% DMSO concentration (0.50 mm diameter) and against S. pneumoniae (0.40 mm diameter). Zirconia nanoparticles were also evaluated for their antifungal activity against several species, including Aspergillus niger, Aspergillus flavus, and Penicillium sp. The size of the inhibitory zone indicated the susceptibility of microorganisms to nanozirconium oxide, resulting in a stronger inhibition of Penicillium sp. at a 100% DMSO concentration (4.50 mm diameter) compared to A. niger and A. flavus (3.00 mm diameter). The results for Penicillium sp. at a 3% DMSO concentration showed a diameter of the inhibitory zone of 0.90 mm, while for A. niger and A. flavus, the diameter was 0.80 mm. Thus, our findings demonstrate that the zirconium oxide nanoparticles possess the capability to reduce the inhibition zone effectively for both bacterial and fungal activities.

Lactose-6-phosphate as an alternative to disodium phosphate in the production of processed cheese food.

Processed cheese food (PCF) is a dairy product prepared by blending dairy ingredients with nondairy ingredients and heating the blend with agitation to produce a homogeneous product with an extended shelf life. Emulsifying salts (ES), such as disodium phosphate (DSP) and trisodium citrate, have a critical effect on the emulsification characteristics of casein by sequestering the calcium from the calcium-paracaseinate phosphate complex in natural cheese. Lactose-6-phosphate (LP) is an organic compound produced from lactose that has the potential to function as ES. Lactose-6-phosphate is not approved for use as a substitute for ES in the large-scale production of PC. The objective of this study was to produce PCF with LP instead of DSP. Lactose-6-phosphate was prepared by mixing 1 mol of α-lactose with 0.5 mol of sodium cyclo-triphosphate. The pH of recombined solutions was adjusted using sodium hydroxide to get a pH of 12 to obtain 60.74% LP. The solution was stirred for 3 d at room temperature and then concentrated to 52% total solids (TS). The ingredients in the PCF formulations were Cheddar cheese, butter, water, milk permeate powder, and LP (at a ratio of 2.0, 2.4, 2.8, 3.2, 4.0, 5.0, and 6.0%) were formulated to contain 17.0% protein, 25.0% fat, 44.0% moisture, and 2.0% salt. Processed cheese food made with 2.0% DSP was also produced as a control. The PCF was prepared by mixing all ingredients in a Kitchen Aid stand mixer to make a homogeneous paste. A 25-g sample of the mixture was cooked in the rapid visco analyzer (Perten RVA 4500, Macquarie Park, Australia) for 3 min at 95°C at 1,000 rpm for the first 2 min and 160 rpm for the last minute. The PCF was then transferred into molds and refrigerated till further analyses. The PCF was analyzed for moisture, pH, end apparent cooked viscosity, hardness, melted diameter, and melting temperature. The experiment was repeated 3 times using different batches of LP. The moisture of PCF ranged from 42.3% to 44.0% with a pH of 5.6 to 5.8. The end apparent cooked viscosity increased from 818.0 to 2,060.0 cP as the level of LP raised from 0.63% to 1.90%, whereas it was 660.0 cP in control. The hardness of PCF made with LP elevated from 61.9 to 110.1g as the level of LP increased; however, it was 85.6 g in control. The melted diameter decreased from 43 mm in control to 29 mm in 1.90% LP, while the melting temperature of PCF increased from 37.7°C in control to 59.0°C in 1.90% LP. We conclude that LP can be used as a substitute for DSP in PCF manufacture and has more capacity than DSP.

Characteristics of imitation Mozzarella cheese manufactured without emulsifying salts using a combination of culture-based acid curd and micellar casein concentrate.

The objectives of this study were to develop a process to produce acid curd from micellar casein concentrate (MCC) using starter cultures and to manufacture imitation Mozzarella cheese (IMC) using a combination of acid curd and MCC that would confer emulsification ability to the caseins without the use of emulsifying salts (ES). The formulations were targeted to produce IMC with 49.0% moisture, 20.0% fat, 18.0% protein, and 1.5% salt. In the IMC formulation made without ES (FR-2:1), the acid curd was blended with MCC so that the formula contained a 2:1 ratio of protein from acid curd relative to MCC. IMC with ES was also produced as a control. The melt and stretch characteristics of IMC made from FR-2:1 were similar to those of control IMC. We conclude that IMC can be made without ES using a 2:1 ratio of protein from acid curd relative to MCC.

Measurement of carbohydrates and organic acids in varieties of cheese using high-performance liquid chromatography.

Lactose is converted to lactic acid through fermentation and ripening of cheese using starter cultures. The content of lactic acid and organic acids formed during storage of cheese is different based on the type of starter cultures, pH, processing, and storage conditions. The objective of this study was to determine the carbohydrates and organic acids of four different commercial cheese samples (Parmesan, Mozzarella, Swiss, and Cheddar cheese) using high-performance liquid chromatography (HPLC). The lactose content in Cheddar cheese was significantly high (p < .05) as compared to Parmesan cheese while Mozzarella and Swiss cheese did not have lactose. However, galactose was low in Swiss cheese as compared to other cheese types, while glucose did not detect in all cheese samples. Organic acids such as citric, succinic, lactic, and butanoic acids were high in Parmesan cheese relative to other cheese types. Additionally, pyruvic and propanoic acids were high (p < .05) in Swiss cheese while acetic and orotic acids were elevated (p < .05) in Mozzarella cheese relative to other types of cheese.

Manufacture of a novel cultured micellar casein concentrate ingredient for emulsifying salt-free process cheese products applications.

Micellar casein concentrate (MCC) is a high protein ingredient that is typically produced using 3 stages of microfiltration with a 3× concentration factor and diafiltration. Acid curd is an acid protein concentrate, which can be obtained by precipitating the casein at pH 4.6 (isoelectric point) using starter cultures or direct acids without the use of rennet. Process cheese product (PCP) is a dairy food prepared by blending dairy ingredients with nondairy ingredients and then heating the mixture to get a product with an extended shelf-life. Emulsifying salts are critical for the desired functional characteristics of PCP because of their role in calcium sequestration and pH adjustment. The objectives of this study were to develop a process to produce a novel cultured micellar casein concentrate ingredient (cMCC; culture-based acid curd) and to produce PCP without emulsifying salts using different combinations of protein from cMCC and MCC in the formulations (2.0:1.0, 1.9:1.1, and 1.8:1.2). Skim milk was pasteurized at 76°C for 16 s and then microfiltered in 3 microfiltration stages using graded permeability ceramic membranes to produce liquid MCC (11.15% total protein; TPr and 14.06% total solids; TS). Part of the liquid MCC was spray dried to produce MCC powder (75.77% TPr and 97.84% TS). The rest of the MCC was used to produce cMCC (86.9% TPr and 96.4% TS). Three PCP treatments were formulated with different ratios of cMCC:MCC, including 2.0:1.0, 1.9:1.1, and 1.8:1.2 on the protein basis. The composition of PCP was targeted to 19.0% protein, 45.0% moisture, 30.0% fat, and 2.4% salt. This trial was repeated 3 times using different batches of cMCC and MCC powders. All PCP were evaluated for their final functional properties. No significant differences were detected in the composition of PCP made with different ratios of cMCC and MCC except for the pH. The pH was expected to increase slightly with elevating the MCC amount in the PCP formulations. The end apparent viscosity was significantly higher in 2.0:1.0 formulation (4,305 cP) compared with 1.9:1.1 (2,408 cP) and 1.8:1.2 (2,499 cP). The hardness ranged from 407 to 512 g with no significant differences within the formulations. However, the melting temperature showed significant differences with 2.0:1.0 having the highest melting temperature (54.0°C), whereas 1.9:1.1 and 1.8:1.2 showed 43.0 and 42.0°C melting temperature, respectively. The melting diameter (38.8 to 43.9 mm) and melt area (1,183.9 to 1,538.6 mm2) did not show any differences in different PCP formulations. The PCP made with a 2.0:1.0 ratio of protein from cMCC and MCC showed better functional properties compared with other formulations.

Nutritional, antioxidant, and antimicrobial assessment of carrot powder and its application as a functional ingredient in probiotic soft cheese.

Carrots (the main source of carotenoids) have multiple nutritional and health benefits. The objectives of this study were to evaluate the compositional, antioxidant, and antimicrobial properties of carrot powder and to examine its effect on the sensory characteristics, chemical properties, and microbial viability of probiotic soft cheese at a rate of 0.2, 0.4, and 0.6%. The carrot was turned into powder before being analyzed and incorporated as an ingredient in making probiotic soft cheese. Probiotic soft cheese was made from buffalo milk. The buffalo milk (∼6.9% fat, 4.4% protein, 9.2% milk solids not fat, and 0.7% ash) was pasteurized at 75 ± 1°C for 5 min and cooled to 40-42°C. The milk was then divided into 4 aliquots. Sodium chloride (local market, Assiut, Egypt) was added at a ratio of 5% followed by starter cultures. The carrot powder (4.5% moisture, 4.8% ash, 2.7% fat, 8.2% protein, 11.9% fibers, and 72.3% carbohydrate) was added at a rate of 0.2, 0.4, and 0.6%, followed by addition of 0.02 g/kg rennet. The cheese was cut again into cubes, pickled in jars filled with whey, and stored for 28 d at 6 ± 1°C. The results of this study illustrated the nutritional and antioxidant properties of carrot powder. Incorporation of carrot powder in probiotic soft cheese affected the moisture and salt content at 0 d. The total bacteria count decreased from 7.5 to 7.3 log cfu/g in the cheese when carrot powder was used at a rate of 0.6%. The reduction of total bacteria count was noticed during the 28 d of storage by adding carrot powder. Furthermore, lactic acid bacteria and Bifidobacterium longum counts elevated with adding carrot powder during the 28 d of storage.

The Effect of Calcium Hydroxide, Triple Antibiotic Paste and Chlorhexidine on Pain in Teeth with Symptomatic Apical Periodontitis: A Randomised Controlled Trial.

BACKGROUND: One of the main reasons for post endodontic pain is the polymicrobial intracanal flora that may survive the initial disinfection. A single antimicrobial agent might not provide adequate disinfection, and an antimicrobial combination such as triple antibiotic paste was tested to achieve this goal. AIM: The study aimed to assess the efficacy of three intra-canal medicaments on post root canal preparation pain. MATERIALS AND METHODS: Eighty patients with single-rooted necrotic teeth and symptomatic apical periodontitis were randomly assigned to four treatment groups (n = 20). Their preoperative pain was recorded on Wong-Baker's FACES pain rating scale. After chemo-mechanical canal preparation, intracanal medications were applied to the groups (Group 1 (20% calcium hydroxide), Group 2 (2% chlorhexidine), Group 3 (tri-antibiotic paste), Group 4 (no medication (Control group)). Patients were instructed to record pain on the Wong-Baker FACES pain rating scale at 4, 48, 72 and 96 hrs, postoperatively. Pain scores were analyzed using a one-way ANOVA test and Tukey's post hoc test and, if significant, Dunn's test was used for pair-wise comparisons. The significance level was set at a p-value ≤ 0.05. RESULTS: Tukey's post hoc test revealed significantly lower pain scores in Group 3 compared with other groups at all follow up intervals. Dunnett's test showed significantly lower pain in Group 3 compared with the Control group at 48, 72 and 96 hrs, postoperatively. CONCLUSIONS: Triple-antibiotic paste showed effective pain control as an intracanal medication on necrotic teeth with symptomatic apical periodontitis.

Service-learning's impact on dental students' attitude to community service.

BACKGROUND: This study aimed to observe the impact of service learning on the attitude of senior dental students toward community service. METHODS: A cross-sectional survey-based was conducted and recruited a total of 120 senior students of Dentistry Taibah University that were enrolled in a clinical service-learning course using convenience sampling. The attitude of dental college students toward community service based on the model of helping behavior by Schwartz was evaluated through Community Service Attitude Scale (CSAS). The data was collected using the same questionnaires for the pre-test and post-test. Data were analyzed by using SPSS 25. A repeated-measures mixed-model ANOVA was used to test the changes across pre-and post-test. RESULTS: A total of 96 students completed the first survey, making a response rate of 80%, and 78 among them completed the second survey as well, making a response rate of 81%. Significant change (P < 0.0001) in ANOVA indicated that there was an overall change in attitude.  CONCLUSIONS: It can be concluded that community-based service-learning positively impacts the attitude of last year's dental students toward understanding needs at the community level and the attitude to help in providing dental care at the community level.

Root Canal Configuration and Its Relationship with Endodontic Technical Errors and Periapical Status in Premolar Teeth of a Saudi Sub-Population: A Cross-Sectional Observational CBCT Study.

Endodontic technical errors are the foremost cause of treatment failure. A thorough understanding of root canal configuration (RCC) is essential to prevent these iatrogenic errors. This study used CBCT images to determine the association between root canal configuration, endodontic technical errors, and periapical status. CBCT images of 101 patients, including total of 212 obturated premolars (256 canals) were assessed. RCCs were classified according to the Vertucci system. The presence of endodontic errors and periapical lesions associated with each RCC was noted. Presence or absence of coronal restoration and its association with periapical radiolucency was recorded. The most frequent RCC was Type I (199 cases; 77.73%), followed by Type II (26 cases; 10.15%), Type IV (22 cases; 8.59%), Type V (4 cases; 1.56%), Type III (4 cases; 1.56%), and Type VI (1 case; 0.39%). Under-filling and non-homogeneous filling were the most common technical errors. Prevalence of periapical radiolucency was 81% in the presence of technical errors. The absence of coronal restoration caused apical lesions in 93% of cases. The frequency of endodontic technical errors increased as the root canal configurations became more complex. Periapical lesions occurred more often in teeth with endodontic errors and/or absent coronal restoration.

Manufacture of process cheese products without emulsifying salts using acid curd and micellar casein concentrate.

Process cheese products (PCP) are dairy foods prepared by blending dairy ingredients (such as natural cheese, protein concentrates, butter, nonfat dry milk, whey powder, and permeate) with nondairy ingredients [such as sodium chloride, water, emulsifying salts (ES), color, and flavors] and then heating the mixture to obtain a homogeneous product with an extended shelf life. The ES, such as sodium citrate and disodium phosphate, are critical for the unique microstructure and functional properties of PCP because they improve the emulsification characteristics of casein by displacing the calcium phosphate complexes that are present in the insoluble calcium-paracaseinate-phosphate network in natural cheese. The objectives of this study were to determine the optimum protein content (3, 6, and 9% protein) in micellar casein concentrate (MCC) to produce acid curd and to manufacture PCP using a combination of acid curd cheese and MCC that would provide the desired improvement in the emulsification capacity of caseins without the use of ES. To produce acid curd, MCC was acidified using lactic acid to get a pH of 4.6. In the experimental formulation, the acid curd was blended with MCC to have a 2:1 ratio of protein from acid curd relative to MCC. The PCP was manufactured by blending all ingredients in a KitchenAid blender (Professional 5 Plus, KitchenAid) to produce a homogeneous paste. A 25-g sample of the paste was cooked in the rapid visco analyzer (RVA) for 3 min at 95°C at 1,000 rpm stirring speed during the first 2 min and 160 rpm for the last min. The cooked PCP was then transferred into molds and refrigerated until further analysis. This trial was repeated 3 times using different batches of acid curd. MCC with 9% protein resulted in acid curd with more adjusted yield. The end apparent viscosity (402.0-483.0 cP), hardness (354.0-384.0 g), melting temperature (48.0-51.0°C), and melting diameter (30.0-31.4 mm) of PCP made from different acid curds were slightly different from the characteristics of typical PCP produced with conventional ingredients and ES (576.6 cP end apparent viscosity, 119.0 g hardness, 59.8°C melting temperature, and 41.2 mm melting diameter) due to the differences in pH of final PCP (5.8 in ES PCP compared with 5.4 in no ES PCP). We concluded that acid curd can be produced from MCC with different protein content. Also, we found that PCP can be made with no ES when the formulation uses a 2:1 ratio of acid curd relative to MCC (on a protein basis).

Red-Complex Bacterial Levels in Pregnant Women With Preeclampsia and Chronic Periodontitis.

OBJECTIVES: The presence of red-complex bacteria (RCB) has been associated with the occurrence of not only periodontal disease but also other systemic diseases, thereby potentiating an oral-systemic relationship. This study aimed to explore the levels of periodontal RCB in pregnant preeclamptic women with periodontal disease, potentiating the pathophysiology of a bacterial association in both periodontitis and preeclampsia. METHODS: Six hundred pregnant women (aged 20 to 35 years) in their third trimester were selected and divided into 3 groups comprising a control group (systemically and periodontally healthy pregnant women), group A (preeclamptic women with chronic periodontitis), and group B (preeclamptic women without chronic periodontitis). Demographic variables and periodontal parameters were recorded. Other variables such as systolic blood pressure (SBP) and diastolic blood pressure (DBP) and the urine protein content were also estimated. RCB, namely Porphyromonas gingivalis (Pg), Treponema denticola (Td), and Tenerella forsythia (Tf), were assessed in both subgingival plaque samples and placental samples of all the pregnant participants in the study. RESULTS: The mean weight, mean body mass index, mean SBP, mean DBP, and mean urine protein content were significantly elevated in group A and group B when compared to the control group. Preeclamptic women with chronic periodontitis (group A) had higher levels of plaque index, probing pocket depth, bleeding on probing, and clinical attachment level as compared with the other groups. The numbers of the RCB were found to be elevated in group A, out of which Pg was found to be more prevalent. CONCLUSIONS: Our findings indicate that the periodontal indices, blood pressure, and urine protein content were found to be higher in preeclamptic women with periodontitis. Hence, reducing the periodontal bacterial load in pregnant women via good oral hygiene maintenance would further reduce the putative risk of adverse pregnancy outcomes including preeclampsia in these women.

Suppression of Tumorigenicity 2 Pro-Inflammatory Biomarker Linking Diabetes Mellitus and Periodontitis: A Pilot Study.

BACKGROUND Suppression of tumorigenicity 2 (ST2) is a member of the interleukin (IL)-1 family and has 2 isoforms: ST2L, a transmembrane form, and ST2, a soluble form. IL-33 can act as an immune system alarm signal when released by damaged cells, which in turn activates other cells expressing the ST2 receptor. This can cause inflammatory cytokines to be released and produced, as well as trigger osteoclastogenesis. This study aimed to investigate the levels of soluble ST2 in gingival samples. MATERIAL AND METHODS The study population consisted of 30 individuals. The participants were divided into 3 groups: healthy participants, patients with periodontitis, and patients with periodontitis and diabetes mellitus. Periodontitis was determined using probing depth, clinical attachment loss, and gingival index. Patients with stage 2 to 4 periodontitis met the inclusion criteria. Gingival crevicular fluid (GCF) was collected for quantification of samples for ST2 levels by using an enzyme immunoassay. RESULTS The mean±standard deviation of ST2 GCF concentrations was relatively high (558.87±68.99) in the group with periodontitis and diabetes mellitus, compared with that of the periodontitis group (452.06±54.18) and healthy group (252.82±87.9). CONCLUSIONS GCF ST2 values were found to be a marker of inflammatory activities. Thus, GCF ST2 could be a potential biomarker for the diagnosis of periodontitis as well as systemic diseases, such as diabetes mellitus. This pilot study was limited by a small number of participants. To confirm the associations, more large-scale investigations should be conducted.

Occurrence of Listeria spp. in Soft Cheese and Ice Cream: Effect of Probiotic Bifidobacterium spp. on Survival of Listeria monocytogenes in Soft Cheese.

Listeria monocytogenes is one of the most important emerging foodborne pathogens. The objectives of this work were to investigate the incidence of Listeria spp. and L. monocytogenes in soft cheese and ice cream in Assiut city, Egypt, and to examine the effect of some probiotic Bifidobacterium spp. (Bifidobacterium breve, Bifidobacterium animalis, or a mixture of the two) on the viability of L. monocytogenes in soft cheese. The existence of Listeria spp. and L. monocytogenes was examined in 30 samples of soft cheese and 30 samples of ice cream. Bacteriological analyses and molecular identification (using 16S rRNA gene and hlyA gene for Listeria spp. and L. monocytogenes, respectively) were performed on those samples. Additionally, Bifidobacterium spp. were incorporated in the making of soft cheese to study their inhibitory impacts on L. monocytogenes. Out of 60 samples of soft cheese and ice cream, 25 samples showed Listeria spp., while L. monocytogenes was found in only 2 soft cheese samples. Approximately 37% of soft cheese samples (11 out of 30) had Listeria spp. with about 18.0% (2 out of 11) exhibiting L. monocytogenes. In ice cream samples, Listeria spp. was presented by 47% (14 out of 30), while L. monocytogenes was not exhibited. Moreover, the addition of B. animalis to soft cheese in a concentration of 5% or combined with B. breve with a concentration of 2.5% for each resulted in decreasing L. monocytogenes efficiently during the ripening of soft cheese for 28 d. Listeria spp. is widely found in milk products. Probiotic bacteria, such as Bifidobacterium spp., can be utilized as a natural antimicrobial to preserve food and dairy products.

Evaluation of Mesiodistal Root Angulation of Permanent Incisors, Canines, and First Pre-Molars by Orthopantomogram Dental Imaging Findings in 296 Children Aged 6-14 Years.

BACKGROUND Early pre-eruptive inclination changes of the first premolar (FP) and its associative changes with canine (C) inclination are important to predict canine impaction. This study aimed to evaluate the mesiodistal root angulation of permanent lateral incisors (LI), canines, and first molars by orthopantomogram dental imaging in 296 children ages 6-14 years at a single center in India. MATERIAL AND METHODS The total number of participants was 296, with equal numbers of boys and girls divided into 4 age groups: 6-8 years, 8-10 years, 10-12 years, and 12-14 years. Angles between lateral incisor, erupting canine, and first pre-premolar with midline were measured on an orthopantomogram (dental imaging which includes all the teeth with TMJ). The angle between the erupting C with LI and erupting C with FP was measured. Pearson's correlation was also evaluated between the movement of the erupting canine with lateral incisor and erupting canine with erupting first premolar. RESULTS There was a significant difference in the angular values of different age groups (P≤0.05). The movements between LI, C, and FP were moderately correlated boys and girls aged 6-12 years. CONCLUSIONS The findings from this study showed that in boys and girls aged 6-14 years, eruption of the upper canine tooth was synchronized with eruption of the LI and FP.

Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison.

This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings fabricated using three types of resin patterns with subtractive (milling) and additive technology (3D printing), as it is not widely reported. Working casts (n = 15) were scanned and patterns were completed using computer-aided designing (CAD). Resin patterns were fabricated using the designed data and divided into three groups according to the method of fabrication of patterns: subtractive technology-CAD milled polymethyl methacrylate resin (Group-PMMA), additive technology [digital light processing (DLP) technique]-acrylonitrile-butadiene-styrene (ABS) patterns (Group-ABS), and polylactic acid (PLA) patterns (Group-PLA). Resin patterns were casted with Cobalt-Chromium (Co-Cr) alloy (lost wax technique). Internal and marginal gaps of the metal copings were analyzed with the replica technique under optical microscope. The Kruskal-Wallis test was used to compare values among the groups, and post hoc multiple tests confirmed the specific differences within the groups. The median marginal gap was least for CAD milled resin patterns, followed by PLA printed resin patterns and ABS printed resin patterns. There were significant differences between Group-PMMA and Group-PLA and Group-ABS (p = 0.0001). There was no significant difference between Group-PLA and Group-ABS (p = 0.899). The median internal gap was least for metal copings fabricated from Group-PLA, followed by Group-ABS and Group-PMMA. The differences were not statistically significant (p = 0.638) for the internal gap. Full metal Co-Cr copings fabricated from the milled PMMA group had a better marginal fit, followed by the PLA and ABS printed groups. Copings fabricated with the PLA printed group had the best internal fit, though the values were statistically insignificant between the groups.

Comparative Evaluation of Microleakage of Flowable Composite Resin Using Etch and Rinse, Self-Etch Adhesive Systems, and Self-Adhesive Flowable Composite Resin in Class V Cavities: Confocal Laser Microscopic Study.

The essential factor in determining the preservation of restoration is the marginal seal. Restoring cervical lesions with a resin composite has always been a challenge. Composite resins with various viscosities and different bonding systems are being researched to reduce the microleakage. Confocal laser scanning microscopy (CLSM) is the latest non-destructive technique for visualizing the microleakage. Objectives: To evaluate and compare the microleakage of Universal Flo composite resin (G-aenial) using etch and rinse adhesive system ER-2 steps (Adper Single Bond 2), self-etch adhesive system SE-1 step (G-Bond), and self-adhesive flowable composite resin (Constic) in Class V cavities using a confocal laser scanning microscope. Materials and Method: Class V cavities were prepared on 27 caries-free human extracted premolar teeth on the buccal and lingual surfaces with standardized dimensions of 2 mm height, width 4 mm, and a depth of 2 mm. After the cavity preparation, all teeth were randomly divided into three groups, namely Group-I: G-aenial Universal Flo with Single Bond 2 (n = 9 teeth); Group-II: G- aenial Universal Flo with G-Bond (n = 9 teeth), and Group-III: Constic (n = 9 teeth). The prepared and restored specimens were then subjected to thermocycling for 500 cycles in a water bath at 5 °C and 55 °C with a dwelling time of 30 s. The specimens were placed in 0.6% aqueous rhodamine dye for 48 h. Sectioning was carried out bucco-lingually and specimens were evaluated for microleakage under a confocal laser scanning microscope. Results: There was a significant difference (p = 0.009) in microleakage when comparing total etch and rinse, specifically between Adper Single Bond 2 ER-2 steps (fifth generation) and self-adhesive flowable composite resin, which is Constic. There was more microleakage in the self-etch bonding agent, particularly G-Bond, SE-1 step (seventh generation), when compared to ER-2 steps (fifth generation bonding agent); however, the results were not statistically significant (p = 0.468). The self-adhesive flowable composite resin showed more microleakage than SE-1 step and ER-2 steps. Conclusions: None of the adhesive systems tested were free from microleakage. However, less microleakage was observed in the total etch and rinse, especially Adper Single Bond 2 (ER-2 steps), than the self-etch adhesive system SE-1 step and self-adhesive flowable composite resin. Clinical significance: Constant research and technological advancements are taking place in dentin adhesives to improve the marginal seal. This has led to the evolution of total acid-etching dentin bonding agents termed as etch and rinse (ER)-2 steps (fifth generation dentin bonding agents) and self-etching (SE) 2 steps, and SE-1 step dentin bonding agents termed as the sixth and seventh generation bonding agents, respectively.

Using Rosemary Essential Oil as a Potential Natural Preservative during Stirred-like Yogurt Making.

The popularity of rosemary has grown as a natural alternative over the synthetic supplements due to its potential health benefits. The rosemary plant has been utilized to preserve food due to its ability to prevent oxidation and microbial contamination. The reason for this study was to determine the phytochemical components and antimicrobial activity of rosemary essential oil (REO) and the effect of REO addition (0.5 and 0.7%) on the chemical, microbiological, and sensory properties of stirred-like yogurt (SLY) during 16 days of storage at 4 °C. The obtained data observed that REO exhibited antimicrobial action against Escherichia coli, Staphylococcus aureus, and Salmonella marcescens, as well as fungi (Aspergillus flavus) and yeasts (Candida albicans). Increased REO to 0.7% accelerated (p < 0.05) the development of lactic acid bacteria (LAB) in SLY (8.3 log cfu/g) and delayed yeast growth up to 12 days. Molds and coliforms were also not found in the SLY samples with REO. In comparison to control samples, sensory results showed that the addition of REO improves the overall acceptance of SLY (p < 0.05). In conclusion, the current study found that REO could be used as a natural preservative during the production of SLY to extend shelf-life and promote LAB development.

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study.

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey's multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.

Evaluating the Effect of Tideglusib-Loaded Bioactive Glass Nanoparticles as a Potential Dentine Regenerative Material.

Dental pulp treatment is the least intrusive procedure currently available for preserving the vitality of the pulp. Several studies are underway to improve the bioactivity of pulp capping materials. Tideglusib isa potent anti-inflammatory, antioxidant, and a regenerative drug developed against Alzheimer's disease and has been shown to be effective in the treatment of dental cavities. However, its bioactive properties encapsulated within the nanoparticles as a component of pulp capping material are largely unknown. In this study, tideglusib-loaded bioactive glass nanoparticles were synthesized (tideglusib-BgNPs) and mixed at various concentrations into the calcium silicate cement to testits physiomechanical and bioactivitiescompared with biodentine (control). The calcium silicate cement with 10wgt% tideglusib-BgNPs showed comparable physiomechanical properties to that of biodentine. Additionally, the assessment of cytotoxicity and bioactivity (cell proliferation, wound healing, and cell migration assays) showed increased bioactivity in terms of better wound healing, increased proliferation, and better migration of human dental pulp stem cells than biodentine. These findings suggest new opportunities to use tideglusib-BgNPs in pulp therapy.