Application and experimental validation of an integral method for simulation of gradient-induced eddy currents on conducting surfaces during magnetic resonance imaging.

The time-varying magnetic fields created by the gradient coils in magnetic resonance imaging can produce negative effects on image quality and the system itself. Additionally, they can be a limiting factor to the introduction of non-MR devices such as cardiac pacemakers, orthopedic implants, and surgical robotics. The ability to model the induced currents produced by the switching gradient fields is key to developing methods for reducing these unwanted interactions. In this work, a framework for the calculation of induced currents on conducting surface geometries is summarized. This procedure is then compared to two separate experiments: (1) the analysis of the decay of currents induced upon a conducting cylinder by an insert gradient set within a head only 7 T MR scanner; and (2) analysis of the heat deposited into a small conductor by a uniform switching magnetic field at multiple frequencies and two distinct conductor thicknesses. The method was shown to allow the accurate modeling of the induced time-varying field decay in the first case, and was able to provide accurate estimation of the rise in temperature in the second experiment to within 30% when the skin depth was greater than or equal to the thickness of the conductor.

Field dependence of T1 for hyperpolarized [1-13C]pyruvate.

In vivo metabolism of hyperpolarized pyruvate has been demonstrated to be an important probe of cellular glycolysis in diseases such as cancer. The usefulness of hyperpolarized (13)C imaging is dependent on the relaxation rates of the (13)C-enriched substrates, which in turn depend on chemical conformation and properties of the dissolution media such as buffer composition, solution pH, temperature and magnetic field. We have measured the magnetic field dependence of the spin-lattice relaxation time of hyperpolarized [1-(13)C]pyruvate using field-cycled relaxometry. [1-(13)C]pyruvate was hyperpolarized using dynamic nuclear polarization and then rapidly thawed and dissolved in a buffered solution to a concentration of 80 mmol l(-1) and a pH of ~7.8. The hyperpolarized liquid was transferred within 8 s to a fast field-cycling relaxometer with a probe tuned for detection of (13)C at a field strength of ~0.75 T. The magnetic field of the relaxometer was rapidly varied between relaxation and acquisition fields where the sample magnetization was periodically measured using a small flip angle. Data were recorded for relaxation fields varying between 0.237 mT and 0.705 T to map the T(1) dispersion of the C-1 of pyruvate. Using similar methods, we also determined the relaxivity of the triarylmethyl radical (OX063; used for dynamic nuclear polarization) on the C-1 of pyruvate at field strengths of 0.001, 0.01, 0.1 and 0.5 T using 0.075, 1.0 and 2.0 mmol l(-1) concentrations of OX063 in the hyperpolarized pyruvate solution.

Design of field-cycled magnetic resonance systems for small animal imaging.

This paper presents a design study for a field-cycled magnetic resonance imaging (MRI) system directed at small animal imaging applications. A field-cycled MRI system is different from a conventional MRI system in that it uses two separate and dynamically controllable magnetic fields. A strong magnetic field is used to polarize the object, and a relatively weak magnetic field is used during signal acquisition. The potential benefits of field-cycled MRI are described. The theoretical dependences of field-cycled MRI performance on system design are introduced and investigated. Electromagnetic, mechanical and thermal performances of the system were considered in this design study. A system design for imaging 10 cm diameter objects is presented as an example, capable of producing high-duty-cycle polarizing magnetic fields of 0.5 T and readout magnetic fields corresponding to a proton Larmor frequency of 5 MHz. The specifications of the final design are presented along with its expected electromagnetic and thermal performance.

Measurement of the total active 8B solar neutrino flux at the Sudbury Neutrino Observatory with enhanced neutral current sensitivity.

The Sudbury Neutrino Observatory has precisely determined the total active (nu(x)) 8B solar neutrino flux without assumptions about the energy dependence of the nu(e) survival probability. The measurements were made with dissolved NaCl in heavy water to enhance the sensitivity and signature for neutral-current interactions. The flux is found to be 5.21 +/- 0.27(stat)+/-0.38(syst) x 10(6) cm(-2) s(-1), in agreement with previous measurements and standard solar models. A global analysis of these and other solar and reactor neutrino results yields Deltam(2)=7.1(+1.2)(-0.6) x 10(-5) eV(2) and theta=32.5(+2.4)(-2.3) degrees. Maximal mixing is rejected at the equivalent of 5.4 standard deviations.

Constraints on nucleon decay via invisible modes from the Sudbury Neutrino Observatory.

Data from the Sudbury Neutrino Observatory have been used to constrain the lifetime for nucleon decay to "invisible" modes, such as n-->3nu. The analysis was based on a search for gamma rays from the deexcitation of the residual nucleus that would result from the disappearance of either a proton or neutron from 16O. A limit of tau(inv)>2 x 10(29) yr is obtained at 90% confidence for either neutron- or proton-decay modes. This is about an order of magnitude more stringent than previous constraints on invisible proton-decay modes and 400 times more stringent than similar neutron modes.