RESUMO
Competitive binding of distinct molecules in the hydrogel interior can facilitate dynamic exchange between the hydrogel and the surrounding environment. The ability to control the rates of sequestration and release of these molecules would enhance the hydrogel's functionality and enable targeting of a specific task. Here, we report the design of a colloidal hydrogel with two distinct pore dimensions to achieve staged, diffusion-controlled scavenging and release dynamics of molecules undergoing competitive binding. The staged scavenging and release strategy was shown for CpG oligodeoxynucleotide (ODN) and human epidermal growth factor (hEGF), two molecules exhibiting different affinities to the quaternary ammonium groups of the hydrogel. Fast ODN scavenging from the ambient environment occurred via diffusion through submicrometer-size hydrogel pores, while delayed hEGF release from the hydrogel was governed by its diffusion through nanometer-size pores. The results of the experiments were in agreement with simulation results. The significance of staged ODN-hEGF exchange was highlighted by the dual anti-inflammation and tissue proliferation hydrogel performance.
RESUMO
PURPOSE: Many curricula promote frontal teaching approaches, potentially decreasing interaction and motivation - also within infection prevention & control and infectious diseases (IPC/ID). We aimed to investigate the implementation of three innovative teaching methods (ITM) within IPC/ID education: game-based learning (GBL), peer-teaching (PT) and misinformation detection (MID). METHODS: Multi-phase study involving third-year medical students was conducted. Phase-1 included a cross-sectional survey, assessing previous ITM-experience and interest to participate in phase-2, where the students were divided into teams. Each team prepared a video covering an IPC/ID-topic with deliberately placed misinformation, which had to be identified and corrected by the opposing team, followed by qualitative evaluation (phase-3). Finally, the MID-concept was incorporated into regular curricula in a non-competitive environment (phase-4) and evaluated within a cohort not involved in phases 1-3. RESULTS: 276 students responded to phase-1. 58% expressed interest in participating in phase-2. Roughly 59% [47-71%] CI-95% of respondents without previous PT-experience stated interest in PT, while the interest in GBL and MID was even higher. 19 students participated in phase-2. All topic MID-scores ranged between 6 and 8/10 points, except for emporiatrics (3/10). Post-hoc analysis revealed a positive student-perception of ITM, particularly GBL. Phase-4 received 103 responses with general positive evaluation. Major agreements existed on the usefulness of critical information evaluation for medical practice (82% [75-91%] CI-95%) and of MID during studies (69% [59-79%] CI-95%). CONCLUSION: our results hint at a relatively high interest in ITM and show MID applicability in regular IPC/ID curricula, which could be of advantage for the learning environment.
RESUMO
Carbonyl cross-linkers are used to modify textiles and form resins, and are produced annually in megatonne volumes. Due to their toxicity toward the environment and human health, however, less harmful biobased alternatives are needed. This study introduces carbonyl groups to lactose and galactose using galactose oxidase from Fusarium graminearum (FgrGalOx) and pyranose dehydrogenase from Agaricus bisporus (AbPDH1) to produce four cross-linkers. Differential scanning calorimetry was used to compare cross-linker reactivity, most notably resulting in a 34 °C decrease in reaction peak temperature (72 °C) for FgrGalOx-oxidized galactose compared to unmodified galactose. Attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and proton nuclear magnetic resonance (1H NMR) spectroscopy were used to verify imine formation and amine and aldehyde depletion. Cross-linkers were shown to form gels when mixed with polyallylamine, with FgrGalOx-oxidized lactose forming gels more effectively than all other cross-linkers, including glutaraldehyde. Further development of carbohydrate cross-linker technologies could lead to their adoption in various applications, including in adhesives, resins, and textiles.
Assuntos
Reagentes de Ligações Cruzadas , Oxirredução , Poliaminas , Reagentes de Ligações Cruzadas/química , Poliaminas/química , Galactose Oxidase/química , Galactose Oxidase/metabolismo , Galactose/química , Lactose/química , Agaricus/química , Carboidratos/químicaRESUMO
BACKGROUND: Functional electrical stimulation (FES) is a rehabilitation technique that enables functional improvements in patients with motor control impairments. This study presents an original design and prototyping method for a smart sleeve for FES applications. The article explains how to integrate a carbon-based dry electrode into a textile structure and ensure an electrical connection between the electrodes and the stimulator for effective delivery of the FES. It also describes the materials and the step-by-step manufacturing processes. RESULTS: The carbon-based dry electrode is integrated into the textile substrate by a thermal compression molding process on an embroidered conductive matrix. This matrix is composed of textile silver-plated conductive yarns and is linked to the stimulator. Besides ensuring the electrical connection, the matrix improves the fixation between the textile substrate and the electrode. The stimulation intensity, the perceived comfort and the muscle torque generated by the smart FES sleeve were compared to hydrogel electrodes. The results show a better average comfort and a higher average stimulation intensity with the smart FES sleeve, while there were no significant differences for the muscle torque generated. CONCLUSIONS: The integration of the proposed dry electrodes into a textile is a viable solution. The wearable FES system does not negatively impact the electrodes' performance, and tends to improve it. Additionally, the proposed prototyping method is applicable to an entire garment in order to target all muscles. Moreover, the process is feasible for industrial production and commercialization since all materials and processes used are already available on the market.
Assuntos
Eletrodos , Têxteis , Humanos , Estimulação Elétrica/instrumentação , Desenho de Equipamento , Masculino , Adulto , Condutividade Elétrica , Carbono/química , TorqueRESUMO
In this study, we utilized in situ nanofibrillation of thermoplastic polyester ether elastomer (TPEE) within a high-density polyethylene (HDPE) matrix to enhance the rheological properties, foamability, and mechanical characteristics of the HDPE nanocomposite at both room and subzero temperatures. Due to the inherent polarity differences between these two components, TPEE is thermodynamically incompatible with the nonpolar HDPE. To address this compatibility issue, we employed a compatibilizer, styrene/ethylene-butylene/styrene copolymer-grafted maleic anhydride (SEBS-g-MA), to reduce the interfacial tension between the two blend components. In the initial step, we prepared a 10% masterbatch of HDPE/TPEE with and without the compatibilizer using a twin-screw extruder. Subsequently, we processed the 10% masterbatch further through spun bonding to create fiber-in-fiber composites. Scanning electron microscopy (SEM) analysis revealed a significant reduction in the spherical size of HDPE/TPEE particles following the inclusion of SEBS-g-MA, as well as a much smaller TPEE nanofiber size (approximately 60-70 nm for 5% TPEE). Moreover, extensional rheological testing revealed a notable enhancement in extensional rheological properties, with strain-hardening behavior being more pronounced in the compatibilized nanofibrillar composites compared to the noncompatibilized ones. SEM images of the foam structures depicted substantial improvement in the foamability of HDPE in terms of the cell size and density following the nanofibrillation process and the use of the compatibilizer. Ultimately, the in situ rubber fibrillation and enhancement of HDPE and TPEE interface using a compatibilizer led to increasing the HDPE ductility at room and subzero temperatures while maintaining its stiffness.
RESUMO
Silica aerogels exhibit exceptional characteristics such as mesoporosity, light weight, high surface area, and pore volume. Nevertheless, their utilization in industrial settings remains constrained due to their brittleness, moisture sensitivity, and costly synthesis procedure. Several studies have proved that adding nanofillers, such as carbon nanotubes (CNT) or graphene nanoplatelets (GNP), can improve the mechanical strength of the aerogels. The incorporation of nanofillers is often accompanied by agglomeration and pore blockage, which, in turn, deteriorates the surface area, pore volume, and low density. Including flexible melamine foam (MF) as a scaffold for the silica aerogel and nanofiller composite can prevent the restacking of the nanofillers through π-π interaction, hence maintaining the incredible properties of aerogels and improving their mechanical properties. CNT, GNP, and the polymeric silica precursor, polyvinyltrimethoxysilane (PVTMS), were added to a MF, at varying concentrations, to fabricate the MF-aerogel nanocomposites. Surfactant and sonication were utilized to ensure a homogeneous dispersion of the nanofillers in the system. The presence of MF prevented the agglomeration of nanofillers, resulting in lower density and relatively higher surface properties (SBET up to 929 m2·g-1 and pore volume up to 4.34 cc·g-1). Moreover, the MF-supported samples could endure 80% strain without breakage and showed an outstanding compressive strength of up to â¼20 MPa. These aerogel nanocomposites also demonstrated an excellent volatile organic compound (â¼2680 mg·g-1) and cationic dye adsorption (â¼10 mg·g-1).
RESUMO
BACKGROUND: Functional electrical stimulation (FES) can be used in rehabilitation to aid or improve function in people with paralysis. In clinical settings, it is common practice to use transcutaneous electrodes to apply the electrical stimulation, since they are non-invasive, and can be easily applied and repositioned as necessary. However, the current electrode options available for transcutaneous FES are limited and can have practical disadvantages, such as the need for a wet interface with the skin for better comfort and performance. Hence, we were motivated to develop a dry stimulation electrode which could perform equivalently or better than existing commercially available options. METHODS: We manufactured a thin-film dry polymer nanocomposite electrode, characterized it, and tested its performance for stimulation purposes with thirteen healthy individuals. We compared its functionality in terms of stimulation-induced muscle torque and comfort level against two other types of transcutaneous electrodes: self-adhesive hydrogel and carbon rubber. Each electrode type was also tested using three different stimulators and different intensity levels of stimulation. RESULTS: We found the proposed dry polymer nanocomposite electrode to be functional for stimulation, as there was no statistically significant difference between its performance to the other standard electrodes. Namely, the proposed dry electrode had comparable muscle torque generated and comfort level as the self-adhesive hydrogel and carbon rubber electrodes. From all combinations of electrode type and stimulators tested, the dry polymer nanocomposite electrode with the MyndSearch stimulator had the most comfortable average rating. CONCLUSIONS: The dry polymer nanocomposite electrode is a durable and flexible alternative to existing self-adhesive hydrogel and carbon rubber electrodes, which can be used without the addition of a wet interfacing agent (i.e., water or gel) to perform as well as the current electrodes used for stimulation purposes.
Assuntos
Cimentos de Resina , Borracha , Humanos , Estimulação Elétrica , Hidrogéis , Eletrodos , CarbonoRESUMO
Applying tessellated origami patterns to the design of mechanical materials can enhance properties such as strength-to-weight ratio and impact absorption ability. Another advantage is the predictability of the deformation mechanics since origami materials typically deform through the folding and unfolding of their creases. This work focuses on creating 4D printed flexible tubular origami based on three different origami patterns: the accordion, the Kresling and the Yoshimura origami patterns, fabricated with a flexible polylactic acid (PLA) filament with heat-activated shape memory effect. The shape memory characteristics of the self-unfolding structures were then harnessed at 60°C, 75°C and 90°C. Due to differences in the folding patterns of each origami design, significant differences in behaviour were observed during shape programming and actuation. Among the three patterns, the accordion proved to be the most effective for actuation as the overall structure can be compressed following the folding crease lines. In comparison, the Kresling pattern exhibited cracking at crease locations during deformation, while the Yoshimura pattern buckled and did not fold as expected at the crease lines. To demonstrate a potential application, an accordion-patterned origami 4D printed tube for use in hand rehabilitation devices was designed and tested as a proof-of-concept prototype incorporating self-unfolding origami.
RESUMO
Polyimide (PI) aerogels are promising in various fields of application, ranging from thermal insulators to aerospace. However, they are typically in the form of a bulk monolith, which suffers from a lack of conformability and drapability. Moreover, their electrical conductivity is limited, and they mainly display an insulative behavior. These shortcomings can limit the applications of PI aerogels in energy storage systems, which require ultralightweight flexible conductive films, which at the same time offer high thermal stability, ultralow density, and high surface area. To overcome these obstacles, the present study reports the fabrication of PI-carbon nanotube (PI-CNT) aerogel composite films with varying CNT content prepared through a sol-gel preparation method, followed by a supercritical drying procedure. Compared to pristine PI aerogels, which displayed a large shrinkage and density of 18.3% and 0.12 g cm-3, respectively, the incorporation of only 5 wt % CNTs resulted in a significant reduction of both shrinkage and density to only 11.5% and 0.10 g cm-3, respectively. This suggests the importance of CNTs in improving the dimensional stability of aerogels and creating a robust network. Further characterizations showed that incorporation of 5 wt % CNTs also resulted in the highest pore volume (1.25 cm3 g-1), highest surface area (324 m2 g-1), highest real permittivity (80), highest electrical conductivity (3 × 10-1 S m-1), and ultrahigh service temperature (575 °C). It was also shown that the aerogel films can withstand a large degree of bending, can be twisted, and can be fully rolled with no obvious cracks propagated in the structure. The combined outstanding properties of the developed aerogel composite films make them promising potential candidates for supercapacitor electrodes. Therefore, the electrochemical performance of the devices based on aerogel electrodes was further studied. The device demonstrated a high energy density of 2.6 Wh kg-1 at a power density of 303.8 W kg-1. The total capacitance after 5000 cycles was 91.8% of the initial capacitance, which indicated excellent stability and durability of the device. Overall, this work provides a facile yet effective methodology for the development of high-performance aerogel materials for energy storage applications.
RESUMO
Functional electrical stimulation (FES) has been a useful therapeutic tool in rehabilitation, particularly for people with paralysis. To deliver stimulation in its most basic setup, a stimulator and at least a pair of electrodes are needed. The electrodes are an essential part of the system since they allow the transduction of the stimulator signals into the body. Their performance can influence the experience of both patient and therapist in terms of movement generation, comfort, and ease of use. For non-invasive surface stimulation, current electrode options have several limitations involving their interfacing with the skin, practical inconveniences, and short-term functionality. Standard hydrogel electrodes tend to lose their adhesion with the skin quickly, while dry or textile electrodes require constant wetting to be comfortable. In this paper, we present the fabrication, characterization, and FES testing of a new aerogel-based wet electrode for surface stimulation applications for long-term and reusable FES applications. We investigated its functionality by stimulating the biceps brachii of twelve healthy individuals and collected elbow joint torque and comfort ratings for three different intensity levels (low, moderate, and high) of FES. Comparing to standard hydrogel electrodes, no statistically significant difference was found for any intensity of stimulation in either torque or comfort. Overall, the new aerogel-based electrode has an appropriate impedance, is flexible and soft, is conformable to the skin, has a high water absorption and retention, and can be used for FES purposes.
Assuntos
Hidrogéis , Têxteis , Humanos , Eletrodos , Músculo Esquelético , Estimulação ElétricaRESUMO
The delivery of electrical pulses to the brain via penetrating electrodes, known as brain stimulation, has been recognized as an effective clinical approach for treating neurological disorders. Resident brain neural precursor cells (NPCs) are electrosensitive cells that respond to electrical stimulation by expanding in number, migrating and differentiating which are important characteristics that support neural repair. Here, we report the design of a conductive cryogel brain stimulation electrode specifically developed for NPC activation. The cryogel electrode has a modulus switching mechanism permitting facile penetration and reducing the mechanical mismatch between brain tissue and the penetrating electrode. The cryogel demonstrated good in vivo biocompatibility and reduced the interfacial impedance to deliver the stimulating electric field with lower voltage under charge-balanced current controlled stimulation. An ex vivo assay reveals that electrical stimulation using the cryogel electrodes results in significant expansion in the size of NPC pool. Hence, the cryogel electrodes have the potential to be used for NPC activation to support endogenous neural repair. STATEMENT OF SIGNIFICANCE: The objective of this study is to develop a cryogel-based stimulation electrode as an alternative to traditional electrode materials to be used in regenerative medicine applications for enhancing neural regeneration in brain. The electrode offers benefits such as adaptive modulus for implantation, high charge storage and injection capacities, and modulus matching with brain tissue, allowing for stable delivery of electric field for long-term neuromodulation. The electrochemical properties of cryogel electrodes were characterized in living tissue with an ex vivo set-up, providing a deeper understanding of stimulation capacity in brain environments. The cryogel electrode is biocompatible and enables low voltage, current-controlled stimulation for effective activation of endogenous neural precursor cells, revealing their potential utility in neural stem cell-mediated brain repair.
Assuntos
Criogéis , Células-Tronco Neurais , Eletrodos , Neurônios/fisiologia , Condutividade Elétrica , Estimulação Elétrica , Eletrodos ImplantadosRESUMO
Chronic wounds exhibit over-expression of cell-free deoxyribonucleic acid (cfDNA), leading to a prolonged inflammation and non-healing wounds. Scavenging excessive cfDNA molecules is a promising strategy for chronic wound treatment. Nanoscopic particles act as efficient cfDNA scavengers due to their large surface area, however their efficiency in cfDNA uptake was limited by adsorption solely on the nanoparticle surface. In contrast, nanogels may provide multiple cfDNA binding sites in the nanoparticle interior, however their use for cfDNA scavenging is yet to be explored. Herein, we report cationic nanogels derived from a copolymer of chitosan and poly{2-[(acryloyloxy)ethyl]trimethylammonium chloride} end-grafted to the chitosan backbone as side chains. The nanogels retain their positive charge at the pH and ionic strength of chronic wound exudate, enabling electrostatically driven cfDNA scavenging. The network structure of the nanogels leads to the cfDNA sequestration in the nanogel interior, in addition to surface attachment. A key factor in cfDNA sequestration is the ratio of the pore size of the nanogel-to-cfDNA molecular dimensions. The enhanced cfDNA scavenging efficiency, along with biocompatibility of the nanogels, makes them a promising component of dressings for chronic wound treatment.
Assuntos
Ácidos Nucleicos Livres , Quitosana , Nanopartículas , NanogéisRESUMO
With the recent development of novel miniaturized magnetically controlled microgripper surgical tools (of diameter 4 mm) for robot-assisted minimally invasive endoscopic intraventricular surgery, the surgeon loses feedback from direct physical contact with the tissue. In this case, surgeons will have to rely on tactile haptic feedback technologies to retain their ability to limit tissue trauma and its associated complications during operations. Current tactile sensors for haptic feedback cannot be integrated to the novel tools primarily due to size limitations and low force range requirements of these highly dextrous surgical operations. This study introduces the design and fabrication of a novel 9 mm2, ultra-thin and flexible resistive tactile sensor whose operation is based on variation of resistivity due to changes in contact area and piezoresistive (PZT) effect of the sensor's materials and sub-components. Structural optimization was performed on the sub-components of the sensor design, including microstructures, interdigitated electrodes, and conductive materials in order to improve minimum detection force while maintaining low hysteresis and unwanted sensor actuation. To achieve a low-cost design suitable for disposable tools, multiple layers of the sensor sub-component were screen-printed to produce thin flexible films. Multi-walled carbon nanotubes and thermoplastic polyurethane composites were fabricated, optimized, and processed into suitable inks to produce conductive films to be assembled with printed interdigitated electrodes and microstructures. The assembled sensor's electromechanical performance indicated three distinct linear sensitivity modes within the sensing range of 0.04-1.3 N. Results also indicated repeatable and low-time responses while maintaining the flexibility and robustness of the overall sensor. This novel ultra-thin screen-printed tactile sensor of 110 µm thickness is comparable to more expensive tactile sensors in terms of performance and can be mounted onto the magnetically controlled micro-scale surgical tools to increase the safety and quality of endoscopic intraventricular surgeries.
Assuntos
Nanotubos de Carbono , Dispositivos Eletrônicos Vestíveis , Tato , Fenômenos Mecânicos , Fenômenos MagnéticosRESUMO
Background: Healthcare workers (HCW) are at risk of getting infected with COVID-19 at work. To prevent such incidents and provide a safe environment in hospitals, comprehensive infection control strategies are necessary. We aimed to collect information on COVID-19 infection control strategies regarding personal protective equipment (PPE), regulations during breaks for HCW and dissemination of pandemic-related information. Methods: We invited infection control practitioners from 987 randomly selected German hospitals in March-April 2021 to participate in our cross-sectional online survey. We categorized the hospital based on bed capacity (≤499 beds = small; ≥500 beds = large). Fisher's exact test was performed and p < 0.05 defined as statistically significant. Findings: 100 participants completed the questionnaire. Small hospitals were more directive about requiring FFP2 respirators (63%), whereas larger hospitals more often gave their HCW a choice between these and medical masks (67%). For the care of COVID-19 and suspected COVID-19 cases, >90% of the participants recommended the use of gloves. Notably, gloves were recommended beyond COVID-19 in 30% of the hospitals. During meal breaks various strategies were followed. Conclusion: Recommendations for PPE varied across hospital sizes, which could be due to different assessments of necessity and safety. Regulations during breaks varied strongly which illustrates the need for clear official guidelines.
RESUMO
Geometric factors of nanofillers considerably govern the properties of conductive polymer composites (CPCs). This study provides insights into how geometrical alteration through nanotube-to-nanoribbon conversion affects the electrical properties of solid and microcellular CPCs. In this regard, polyvinylidene fluoride (PVDF)-based nanocomposites are synthesized using both the parent multi-walled carbon nanotube (MWCNT) and its chemically unzipped product, i.e., graphene nanoribbons (GNRs). Theoretical and experimental results show that GNR-based composites exhibit 1-4 orders greater conductivities than MWCNT-based composites at the same filler loading because of the larger number of filler-filler junctions as well as the significantly greater contact areas. On the other hand, the conductivities of MWCNT-based and GNR-based composites are significantly increased by 230 times and 121 times, respectively, through microcellular foaming. The effective rearrangements of rigid MWCNTs and flexible GNRs (having 4 and 5 orders less bending stiffness) for network formation during cellular growth are compared. The GNR-based composites also exhibit a superior dielectric permittivity (e.g., 2.6 times larger real permittivity at a representative frequency of 103 Hz and a nanofiller loading of 4.2 vol%) compared to their MWCNT-based counterparts. This study demonstrates how the modification of the carbon fillers and the polymer matrix can dramatically enhance EMI shielding.
RESUMO
Applications of polymer hydrogels in separation technologies, environmental remediation, and drug delivery require control of hydrogel transport properties that are largely governed by the pore dimensions. Stimulus-responsive change in pore size offers the capability to change gel's transport properties "on demand". Here, we report a nanocolloidal hydrogel that exhibits temperature-controlled increase in pore size and, as a result, enhanced transport of encapsulated species from the gel. The hydrogel was formed by the covalent cross-linking of aldehyde-modified cellulose nanocrystals and chitosan carrying end-grafted poly(N-isopropylacrylamide) (pNIPAm) molecules. Owing to the temperature-mediated coil-to-globule transition of pNIPAm grafts, they acted as a temperature-responsive "gate" in the hydrogel. At elevated temperature, the size of the pores showed up to a 4-fold increase, with no significant changes in volume, in contrast with conventional pNIPAm-derived gels exhibiting a reduction in both pore size and volume in similar conditions. Temperature-mediated transport properties of the gel were explored by studying diffusion of nanoparticles with different dimensions from the gel, leading to the established correlation between the kinetics of diffusion-governed nanoparticle release and the ratio nanoparticle dimensions-to-pore size. The proposed approach to stimulus-responsive control of hydrogel transport properties has many applications, including their use in nanomedicine and tissue engineering.
Assuntos
Sistemas de Liberação de Medicamentos , Hidrogéis , Hidrogéis/química , Polímeros , Nanomedicina , TemperaturaRESUMO
Electrode impedance is one of the greatest challenges facing neural interfacing medical devices and the use of electrical stimulation-based therapies in the fields of neurology and regenerative medicine. Maximizing contact between electronics and tissue would allow for more accurate recordings of neural activity and to stimulate with less power in implantable devices as electric signals could be more precisely transferred by a stable interfacial area. Neural environments, inherently wet and ion-rich, present a unique challenge for traditional conductive adhesives. As such, we look to marine mussels that use a 3,4-dihydroxyphenyl-L-analine (DOPA)-containing proteinaceous excretion to adhere to a variety of substrates for inspiration. By functionalizing alginate, which is an abundantly available natural polymer, with the catechol residues DOPA contains, we developed a hydrogel-based matrix to which carbon-based nanofiller was added to render it conductive. The synthesized product had adhesive energy within the range of previously reported mussel-based polymers, good electrical properties and was not cytotoxic to brain derived neural precursor cells.
Assuntos
Bivalves , Células-Tronco Neurais , Animais , Hidrogéis/química , Adesivos/química , Proteínas/química , Polímeros/química , Di-Hidroxifenilalanina/químicaRESUMO
Resident brain neural precursor cells (NPCs) are electrosensitive cells that respond to electric field application by proliferating, differentiating, and undergoing rapid and directed cathodal migration. Harnessing NPC potential is a promising strategy to facilitate neural repair following injury or disease. The use of electric fields to activate NPCs is limited by current electrode designs which are typically made of conductive metals that are stiff and can lead to neuroinflammation following implantation, in part due to the mechanical mismatch between physiological conditions and material. Herein, the design of a novel, injectable biobased soft electrode with properties suitable for electrical stimulation in vivo is explored. The recent interest in using biologically derived polymers which are relatively abundant and afford economic feasibility have been built upon. Sodium alginate is utilized to form soft hydrogels, thereby addressing the issue of mechanical mismatch, and the conductive polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), to generate an innovative new material. It is demonstrated that the optimized alginate PEDOT blend matches the modulus of the brain and is suitable for injection and is not cytotoxic to neural cells. Furthermore, in vivo studies demonstrate minimal activation of inflammatory cells upon implantation in the brain compared to classically used platinum-based electrodes.
Assuntos
Alginatos , Células-Tronco NeuraisRESUMO
Polymer composite materials have been proven to have numerous electrical related applications ranging from energy storage to sensing, and 3D printing is a promising technique to fabricate such materials with a high degree of freedom and low lead up time. Compared to the existing 3D printing technique for polymer materials, binder jet (BJ) printing offers unique advantages such as a fast production rate, room temperature printing of large volume objects, and the ability to print complex geometries without additional support materials. However, there is a serious lack of research in BJ printing of polymer materials. In this work we introduce a strategy to print poly(vinyl alcohol) composites with MXene-surfactant ink. By ejecting highly conductive MXene particles onto a PVOH matrix, the resulting sample achieved conductive behaviour in the order of mS m-1 with demonstrated potential for strain sensing and energy storage. This work demonstrates that BJ printing has the potential to directly fabricate polymer composite materials with different end applications.
RESUMO
Developing an efficient catalytic system for electrolysis with reduced platinum (Pt) loading while maintaining performance comparable to bulk platinum metal is important to decrease costs and improve scalability of the hydrogen fuel economy. Here we report the performance of a novel sputter-deposited molybdenum (Mo) thin film with an extremely low co-loading of Pt, where Pt atoms were dispersed on Mo (Ptd-Mo) as an electrocatalyst for the hydrogen evolution reaction (HER) in either alkaline or acidic media. The Ptd-Mo electrocatalyst presents similar catalytic activity to bulk Pt in alkaline media, while the performance is only slightly decreased in acidic media. Differential electrochemical mass spectrometry (DEMS) results confirm that the Ptd-Mo electrocatalyst produced hydrogen at a rate comparable with that of a pristine Pt sample at the same potential. A comparison with Pt-loaded degenerately doped p-type doped silicon (Ptd-Si) suggests that Mo and Pt work synergistically to boost the performance of Ptd-Mo catalysts. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) before and after 1000 cycles of continuous operation confirm the significant durability of the Ptd-Mo performance. Overall, the Ptd-Mo electrocatalyst, with comparable HER activity to bulk Pt despite an ultra-low Pt loading, could be a strong candidate for hydrogen production in either acidic or basic conditions.