Dynamic lattice distortions driven by surface trapping in semiconductor nanocrystals.

Nonradiative processes limit optoelectronic functionality of nanocrystals and curb their device performance. Nevertheless, the dynamic structural origins of nonradiative relaxations in such materials are not understood. Here, femtosecond electron diffraction measurements corroborated by atomistic simulations uncover transient lattice deformations accompanying radiationless electronic processes in colloidal semiconductor nanocrystals. Investigation of the excitation energy dependence in a core/shell system shows that hot carriers created by a photon energy considerably larger than the bandgap induce structural distortions at nanocrystal surfaces on few picosecond timescales associated with the localization of trapped holes. On the other hand, carriers created by a photon energy close to the bandgap of the core in the same system result in transient lattice heating that occurs on a much longer 200 picosecond timescale, dominated by an Auger heating mechanism. Elucidation of the structural deformations associated with the surface trapping of hot holes provides atomic-scale insights into the mechanisms deteriorating optoelectronic performance and a pathway towards minimizing these losses in nanocrystal devices.

Energetic Control of Redox-Active Polymers toward Safe Organic Bioelectronic Materials.

Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side-products. This is particularly important for bioelectronic devices, which are designed to operate in biological systems. While redox-active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side-reactions with molecular oxygen during device operation. Here, electrochemical side reactions with molecular oxygen are shown to occur during organic electrochemical transistor (OECT) operation using high-performance, state-of-the-art OECT materials. Depending on the choice of the active material, such reactions yield hydrogen peroxide (H2 O2 ), a reactive side-product, which may be harmful to the local biological environment and may also accelerate device degradation. A design strategy is reported for the development of redox-active organic semiconductors based on donor-acceptor copolymers that prevents the formation of H2 O2 during device operation. This study elucidates the previously overlooked side-reactions between redox-active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte-gated devices in application-relevant environments.

High-mobility, trap-free charge transport in conjugated polymer diodes.

Charge transport in conjugated polymer semiconductors has traditionally been thought to be limited to a low-mobility regime by pronounced energetic disorder. Much progress has recently been made in advancing carrier mobilities in field-effect transistors through developing low-disorder conjugated polymers. However, in diodes these polymers have to date not shown much improved mobilities, presumably reflecting the fact that in diodes lower carrier concentrations are available to fill up residual tail states in the density of states. Here, we show that the bulk charge transport in low-disorder polymers is limited by water-induced trap states and that their concentration can be dramatically reduced through incorporating small molecular additives into the polymer film. Upon incorporation of the additives we achieve space-charge limited current characteristics that resemble molecular single crystals such as rubrene with high, trap-free SCLC mobilities up to 0.2 cm2/Vs and a width of the residual tail state distribution comparable to kBT.

Redefining near-unity luminescence in quantum dots with photothermal threshold quantum yield.

A variety of optical applications rely on the absorption and reemission of light. The quantum yield of this process often plays an essential role. When the quantum yield deviates from unity by significantly less than 1%, applications such as luminescent concentrators and optical refrigerators become possible. To evaluate such high performance, we develop a measurement technique for luminescence efficiency with sufficient accuracy below one part per thousand. Photothermal threshold quantum yield is based on the quantization of light to minimize overall measurement uncertainty. This technique is used to guide a procedure capable of making ensembles of near-unity emitting cadmium selenide/cadmium sulfide (CdSe/CdS) core-shell quantum dots. We obtain a photothermal threshold quantum yield luminescence efficiency of 99.6 ± 0.2%, indicating nearly complete suppression of nonradiative decay channels.

The Role of the Side Chain on the Performance of N-type Conjugated Polymers in Aqueous Electrolytes.

We report a design strategy that allows the preparation of solution processable n-type materials from low boiling point solvents for organic electrochemical transistors (OECTs). The polymer backbone is based on NDI-T2 copolymers where a branched alkyl side chain is gradually exchanged for a linear ethylene glycol-based side chain. A series of random copolymers was prepared with glycol side chain percentages of 0, 10, 25, 50, 75, 90, and 100 with respect to the alkyl side chains. These were characterized to study the influence of the polar side chains on interaction with aqueous electrolytes, their electrochemical redox reactions, and performance in OECTs when operated in aqueous electrolytes. We observed that glycol side chain percentages of >50% are required to achieve volumetric charging, while lower glycol chain percentages show a mixed operation with high required voltages to allow for bulk charging of the organic semiconductor. A strong dependence of the electron mobility on the fraction of glycol chains was found for copolymers based on NDI-T2, with a significant drop as alkyl side chains are replaced by glycol side chains.

Fused electron deficient semiconducting polymers for air stable electron transport.

Conventional semiconducting polymer synthesis typically involves transition metal-mediated coupling reactions that link aromatic units with single bonds along the backbone. Rotation around these bonds contributes to conformational and energetic disorder and therefore potentially limits charge delocalisation, whereas the use of transition metals presents difficulties for sustainability and application in biological environments. Here we show that a simple aldol condensation reaction can prepare polymers where double bonds lock-in a rigid backbone conformation, thus eliminating free rotation along the conjugated backbone. This polymerisation route requires neither organometallic monomers nor transition metal catalysts and offers a reliable design strategy to facilitate delocalisation of frontier molecular orbitals, elimination of energetic disorder arising from rotational torsion and allowing closer interchain electronic coupling. These characteristics are desirable for high charge carrier mobilities. Our polymers with a high electron affinity display long wavelength NIR absorption with air stable electron transport in solution processed organic thin film transistors.

Understanding Electron Transport in Disk-Shaped Triphenylene-Tris(naphthaleneimidazole)s through Structural Modification and Theoretical Investigation.

Disk-shaped molecules with large aromatic π-surfaces are a class of organic semiconductors in which the charge-carrier transport properties could be greatly facilitated by preferred intermolecular stacking of the π-surfaces. The optical and electronic properties are not only determined by the core aromatic structure of these disk-shaped molecules but are also strongly dependent on the side chains, which directly impact the molecular self-assembly behavior in condensed phases. Triphenylene-tris(naphthaleneimidazole) (TP-TNI) is a recently reported n-type semiconductor featuring a large π-core and branched side chains, with an electron-transporting mobility reaching 10-4 cm2 V-1 s-1. To further improve material performance, a detailed study is needed to understand the dependence of carrier transport properties on both the core electronic structure and side chain. Here, we present the detailed synthesis and characterization of a TP-TNI derivative bearing linear side chains, which has demonstrated a field-effect electron-transport mobility of up to 1.3 × 10-3 cm2 V-1 s-1. The more than 1 order improvement in electron-transport properties over the branched side chain homologue can be correlated to ordered twisted packing in the thin film, as revealed by in situ variable temperature grazing incidence wide-angle X-ray scattering studies. In-depth theoretical understanding of the frontier orbitals, reorganization energies, and charge-transfer integrals of TP-TNI molecules has provided further insight into the relationship between the molecular stacking geometry and charge-transport properties.

Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells.

Technological deployment of organic photovoltaic modules requires improvements in device light-conversion efficiency and stability while keeping material costs low. Here we demonstrate highly efficient and stable solar cells using a ternary approach, wherein two non-fullerene acceptors are combined with both a scalable and affordable donor polymer, poly(3-hexylthiophene) (P3HT), and a high-efficiency, low-bandgap polymer in a single-layer bulk-heterojunction device. The addition of a strongly absorbing small molecule acceptor into a P3HT-based non-fullerene blend increases the device efficiency up to 7.7 ± 0.1% without any solvent additives. The improvement is assigned to changes in microstructure that reduce charge recombination and increase the photovoltage, and to improved light harvesting across the visible region. The stability of P3HT-based devices in ambient conditions is also significantly improved relative to polymer:fullerene devices. Combined with a low-bandgap donor polymer (PBDTTT-EFT, also known as PCE10), the two mixed acceptors also lead to solar cells with 11.0 ± 0.4% efficiency and a high open-circuit voltage of 1.03 ± 0.01 V.

Controlling the mode of operation of organic transistors through side-chain engineering.

Electrolyte-gated organic transistors offer low bias operation facilitated by direct contact of the transistor channel with an electrolyte. Their operation mode is generally defined by the dimensionality of charge transport, where a field-effect transistor allows for electrostatic charge accumulation at the electrolyte/semiconductor interface, whereas an organic electrochemical transistor (OECT) facilitates penetration of ions into the bulk of the channel, considered a slow process, leading to volumetric doping and electronic transport. Conducting polymer OECTs allow for fast switching and high currents through incorporation of excess, hygroscopic ionic phases, but operate in depletion mode. Here, we show that the use of glycolated side chains on a thiophene backbone can result in accumulation mode OECTs with high currents, transconductance, and sharp subthreshold switching, while maintaining fast switching speeds. Compared with alkylated analogs of the same backbone, the triethylene glycol side chains shift the mode of operation of aqueous electrolyte-gated transistors from interfacial to bulk doping/transport and show complete and reversible electrochromism and high volumetric capacitance at low operating biases. We propose that the glycol side chains facilitate hydration and ion penetration, without compromising electronic mobility, and suggest that this synthetic approach can be used to guide the design of organic mixed conductors.

N-type organic electrochemical transistors with stability in water.

Organic electrochemical transistors (OECTs) are receiving significant attention due to their ability to efficiently transduce biological signals. A major limitation of this technology is that only p-type materials have been reported, which precludes the development of complementary circuits, and limits sensor technologies. Here, we report the first ever n-type OECT, with relatively balanced ambipolar charge transport characteristics based on a polymer that supports both hole and electron transport along its backbone when doped through an aqueous electrolyte and in the presence of oxygen. This new semiconducting polymer is designed specifically to facilitate ion transport and promote electrochemical doping. Stability measurements in water show no degradation when tested for 2 h under continuous cycling. This demonstration opens the possibility to develop complementary circuits based on OECTs and to improve the sophistication of bioelectronic devices.

Naphthalenediimide Polymers with Finely Tuned In-Chain π-Conjugation: Electronic Structure, Film Microstructure, and Charge Transport Properties.

Naphthalenediimide-based random copolymers (PNDI-TVTx) with different π-conjugated dithienylvinylene (TVT) versus π-nonconjugated dithienylethane (TET) unit ratios (x = 100→0%) are investigated. The PNDI-TVTx-transistor electron/hole mobilities are affected differently, a result rationalized by molecular orbital topologies and energies, with hole mobility vanishing but electron mobility decreasing only by ≈2.5 times when going from x = 100% to 40%.

Molecular Design of Semiconducting Polymers for High-Performance Organic Electrochemical Transistors.

The organic electrochemical transistor (OECT), capable of transducing small ionic fluxes into electronic signals in an aqueous environment, is an ideal device to utilize in bioelectronic applications. Currently, most OECTs are fabricated with commercially available conducting poly(3,4-ethylenedioxythiophene) (PEDOT)-based suspensions and are therefore operated in depletion mode. Here, we present a series of semiconducting polymers designed to elucidate important structure-property guidelines required for accumulation mode OECT operation. We discuss key aspects relating to OECT performance such as ion and hole transport, electrochromic properties, operational voltage, and stability. The demonstration of our molecular design strategy is the fabrication of accumulation mode OECTs that clearly outperform state-of-the-art PEDOT-based devices, and show stability under aqueous operation without the need for formulation additives and cross-linkers.

The Effect of Processing Additives on Energetic Disorder in Highly Efficient Organic Photovoltaics: A Case Study on PBDTTT-C-T:PC71 BM.

Energetic disorder, an important parameter affecting the performance of organic photovoltaics, is significantly decreased upon the addition of processing additives in a highly efficient benzodithiophene-based copolymer blend (PBDTTT-C-T:PC71 BM). Wide-angle and small-angle X-ray scattering measurements suggest that the origin of this reduced energetic disorder is due to increased aggregation and a larger average fullerene domain size together with purer phases.

Direct observation of doping sites in temperature-controlled, p-doped P3HT thin films by conducting atomic force microscopy.

The distribution of dopant sites in doped poly(3-hexylthiophene) (P3HT) thin films is characterized using optical absorption, grazing-incidence X-ray diffraction, and conducting atomic force microscopy (c-AFM). It is shown that dopant sites can be directly observed using c-AFM and that the solution temperature dramatically impacts phase separation and conductivity in spin-cast films.

Enhancing the performance of solution-processed n-type organic field-effect transistors by blending with molecular "aligners".

A novel approach to enhancing the performance of solution-processed n-type organic field-effect transistors by using trace amounts of molecular "aligners" to manipulate the assembly of "matrix" molecules in thin films is demonstrated. The device performance is one order of magnitude higher in 1wt% blended thin films than that in neat films, which correlates to an induced change of preferred orientation of the in-plane π-stacking molecules upon blending.

PbS nanoparticles capped with tetrathiafulvalenetetracarboxylate: utilizing energy level alignment for efficient carrier transport.

We fabricate a field-effect transistor by covalently functionalizing PbS nanoparticles with tetrathiafulvalenetetracarboxylate. Following experimental results from cyclic voltammetry and ambient-pressure X-ray photoelectron spectroscopy, we postulate a near-resonant alignment of the PbS 1Sh state and the organic HOMO, which is confirmed by atomistic calculations. Considering the large width of interparticle spacing, we observe an abnormally high field-effect hole mobility, which we attribute to the postulated resonance. In contrast to nanoparticle devices coupled through common short-chained ligands, our system maintains a large degree of macroscopic order as revealed by X-ray scattering. This provides a different approach to the design of hybrid organic-inorganic nanomaterials, circumvents the problem of phase segregation, and holds for versatile ways to design ordered, coupled nanoparticle thin films.

Toward a single-layer two-dimensional honeycomb supramolecular organic framework in water.

The self-assembly of well-defined 2D supramolecular polymers in solution has been a challenge in supramolecular chemistry. We have designed and synthesized a rigid stacking-forbidden 1,3,5-triphenylbenzene compound that bears three 4,4'-bipyridin-1-ium (BP) units on the peripheral benzene rings. Three hydrophilic bis(2-hydroxyethyl)carbamoyl groups are introduced to the central benzene ring to suppress 1D stacking of the triangular backbone and to ensure solubility in water. Mixing the triangular preorganized molecule with cucurbit[8]uril (CB[8]) in a 2:3 molar ratio in water leads to the formation of the first solution-phase single-layer 2D supramolecular organic framework, which is stabilized by the strong complexation of CB[8] with two BP units of adjacent molecules. The periodic honeycomb 2D framework has been characterized by various (1)H NMR spectroscopy, dynamic light scattering, X-ray diffraction and scattering, scanning probe and electron microscope techniques and by comparing with the self-assembled structures of the control systems.

Nonmonotonic size dependence in the hole mobility of methoxide-stabilized PbSe quantum dot solids.

We present a facile procedure to fabricate p-type PbSe-based quantum dot solids with mobilities as large as 0.3 cm(2) V(-1)s(-1). Upon partial ligand exchange of oleate-capped PbSe quantum dots with the methoxide ion, we observe a pronounced red shift in the excitonic transition in conjunction with a large increase in conductivity. We show that there is little correlation between these two phenomena and that the electronic coupling energy in PbSe quantum dot solids is much smaller than often assumed. However, we observe for the first time a nonmonotonic size dependence of the hole mobility, illustrating that coupling can nonetheless be dominant in determining the transport characteristics. We attribute these effects to a decrease in charging energy and interparticle spacing, leading to enhanced electronic coupling on one hand and enhanced dipole interactions on the other hand, which is held responsible for the majority of the red shift.

Facile route to an all-organic, triply threaded, interlocked structure by templated dynamic clipping.

Encaged! Three-terminal interlocked molecular species were obtained by dynamic (2+3) assembly of a cagelike macro-bicycle around a trifurcated trispyridinium π guest. The complex is stabilized by π-π interactions and multiple [C-H⋅⋅⋅O] and [C-H⋅⋅⋅N] interactions. Uncomplexed guest molecules cocrystallize alongside the threaded complexes in the solid state, thus giving extended π-stacked columns.