Tunable and Non-Invasive Printing of Transmissive Interference Colors with 2D Material Inks.

Interference colors hold significant importance in optics and arts. Current methods for printing interference colors entail complex procedures and large-scale printing systems for the scarcity of inks that exhibit both sensitivity and tunability to external fields. The production of highly transparent inks capable of rendering transmissive colors has presented ongoing challenges. Here, a type of paramagnetic ink based on 2D materials that exhibit polychrome in one magnetic field is invented. By precisely manipulating the doping ratio of magnetic elements within titanate nanosheets, the magneto-optical sensitivity named Cotton-Mouton coefficient is engineerable from 728 to a record high value of 3272 m-1 T-2, with negligible influence on its intrinsic wide optical bandgap. Combined with the sensitive and controllable magneto-responsiveness of the ink, modulate and non-invasively print transmissive interference colors using small permanent magnets are precised. This work paves the way for preparing transmissive interference colors in an energy-saving and damage-free manner, which can expand its use in widespread areas.

An inorganic liquid crystalline dispersion with 2D ferroelectric moieties.

Electro-optical effect-based liquid crystal devices have been extensively used in optical modulation techniques, in which the Kerr coefficient reflects the sensitivity of the liquid crystals and determines the strength of the device's operational electric field. The Peterlin-Stuart theory and the O'Konski model jointly indicate that a giant Kerr coefficient could be obtained in a material with both a large geometrical anisotropy and an intrinsic polarization, but such a material is not yet reported. Here we reveal a ferroelectric effect in a monolayer two-dimensional mineral vermiculite. A large geometrical anisotropy factor and a large inherent electric dipole together raise the record value of Kerr coefficient by an order of magnitude, till 3.0 × 10-4 m V-2. This finding enables an ultra-low operational electric field of 102-104 V m-1 and the fabrication of electro-optical devices with an inch-level electrode separation, which has not previously been practical. Because of its high ultraviolet stability (decay <1% under ultraviolet exposure for 1000 hours), large-scale production, and energy efficiency, prototypical displayable billboards have been fabricated for outdoor interactive scenes. This work provides new insights for both liquid crystal optics and two-dimensional ferroelectrics.

An Electro-Optical Kerr Device Based on 2D Boron Nitride Liquid Crystals for Solar-Blind Communications.

Achieving light modulation in the spectral range of 200-280 nm is a prerequisite for solar-blind ultraviolet communication, where current technologies are mainly based on the electro-luminescent self-modulation of the ultraviolet source. External light modulation through the electro-birefringence control of liquid crystal (LC) devices has shown success in the visible-to-infrared regions. However, the poor stability of conventional LCs against ultraviolet irradiation and their weak electro-optical response make it challenging to modulate ultraviolet light. Here, an external ultraviolet light modulator is demonstrated using two-dimensional boron nitride LC. It exhibits robust ultraviolet stability and a record-high specific electro-optical Kerr coefficient of 5.1 × 10⁻2 m V-2, being three orders of magnitude higher than those of other known electro-optical media that are transparent (or potentially transparent) in the ultraviolent spectral range. The sensitive response enables fabricating transmissive and stable ultraviolet-C electro-optical Kerr modulators for solar-blind ultraviolet light. An M-ary coding array with high transmission density is also demonstrated for solar-blind ultraviolet communication.