Higher risk of hyperglycemia with greater susceptibility in females in chronic arsenic-exposed individuals in Bangladesh.

Arsenic (As) toxicity and diabetes mellitus (DM) are emerging public health concerns worldwide. Although exposure to high levels of As has been associated with DM, whether there is also an association between low and moderate As exposure and DM remains unclear. We explored the dose-dependent association between As exposure levels and hyperglycemia, with special consideration of the impact of demographic variables, in 641 subjects from rural Bangladesh. The total study participants were divided into three groups depending on their levels of exposure to As in drinking water (low, moderate and high exposure groups). Prevalence of hyperglycemia, including impaired glucose tolerance (IGT) and DM was significantly associated with the subjects' drinking water arsenic levels. Almost all exposure metrics (As levels in the subjects' drinking water, hair and nails) showed dose-dependent associations with the risk of hyperglycemia, IGT and DM. Among the variables considered, sex, age, and BMI were found to be associated with higher risk of hyperglycemia, IGT and DM. In sex-stratified analyses, As exposure showed a clearer pattern of dose-dependent risk for hyperglycemia in females than males. Finally, drinking water containing low-to-moderate levels of As (50.01-150 µg/L) was found to confer a greater risk of hyperglycemia than safe drinking water (As ≤10 µg/L). Thus the results suggested that As exposure was dose-dependently associated with hyperglycemia, especially in females.

Kinetic model and thermodynamic study of Acid Red 1 entrapment at electropolymerised polypyrrole films.

This work is focussed on the determination of a kinetic model and the thermodynamic study of the electrochemical entrapment of the model azo dye, Acid Red 1, at conducting polypyrrole films, which is proposed as a potential green technology for treatment of azo dyes in industrial effluents. The entrapment kinetic data were found to follow a pseudosecond order model involving an intra-particle diffusion. However, the equilibrium data obtained for Acid Red 1 entrapment at polypyrrole did not obey any common surface adsorption models such as the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. Accordingly, the entrapment process may lead to an enhanced quantity of dye embedded in a polypyrrole film, making it a more effective and efficient technology than those involving only adsorption. Similarly, dye leakage from polypyrrole film surface to a sample matrix will be easily prevented. For this treatment process, a negative ΔG° range between -1.46±0.78 and -2.94±0.24 kJ mol(-1) at the corresponding temperature range of 298-318 K, and a ΔH° of 20.5±2.5 kJ mol(-1) indicate a spontaneous and endothermic entrapment process. Also, a positive ΔS° (73.6±8.2 J mol(-1) K(-1)) reveals increased randomness of the interface and an affinity of Acid Red 1 towards polypyrrole films. A low activation energy (7.67±0.80 kJ mol(-1)) confirms a physical process for Acid Red 1 entrapment at polypyrrole films.

Conducting polypyrrole films as a potential tool for electrochemical treatment of azo dyes in textile wastewaters.

In this paper, we demonstrate conducting polypyrrole films as a potential green technology for electrochemical treatment of azo dyes in wastewaters using Acid Red 1 as a model analyte. These films were synthesised by anodically polymerising pyrrole in the presence of Acid Red 1 as a supporting electrolyte. In this way, the anionic Acid Red 1 is electrostatically attracted to the cationic polypyrrole backbone formed to maintain electroneutrality, and is thus entrapped in the film. These Acid Red 1-entrapped polypyrrole films were characterised by electrochemical, microscopic and spectroscopic techniques. Based on a two-level factorial design, the solution pH, Acid Red 1 concentration and polymerisation duration were identified as significant parameters affecting the entrapment efficiency. The entrapment process will potentially aid in decolourising Acid Red 1-containing wastewaters. Similarly, in a cathodic process, electrons are supplied to neutralise the polypyrrole backbone, liberating Acid Red 1 into a solution. In this work, following an entrapment duration of 480 min in 2000 mg L(-1) Acid Red 1, we estimated 21% of the dye was liberated after a reduction period of 240 min. This allows the recovery of Acid Red 1 for recycling purposes. A distinctive advantage of this electrochemical Acid Red 1 treatment, compared to many other techniques, is that no known toxic by-products are generated in the treatment. Therefore, conducting polypyrrole films can potentially be applied as an environmentally friendly treatment method for textile effluents.

Additive effect of lipid lowering drug (simvastatin) in combination with antidiabetic drug (glibenclamide) on alloxan induced diabetic rats with long term dyslipidemia.

High blood glucose level, elevated level of liver enzyme, necrosis and shrinkage of islets of Langerhans has been implicated in the pathogenesis of type 2 diabetes. High blood glucose cause oxidative stress, production of free radical as well as elevated SGPT and SGOT level. Both glibenclamide and simvastatin in fixed dose used as antihyperglycemic antidyslipidemic and antioxidative agents for type 2 diabetes treatment. This study therefore aimed to evaluate the antihyperglycemic, antidyslipidemic and antioxidative effect of fixed dose combination of glibenclamide (0.6 mg/70 kg body weight) and simvastatin (5 mg/70 kg body weight) on long term alloxan induced diabetic rats with cardiovascular disease using various diagnostic kits as a parameter of phamacotherapeutic and pharmacological effect. The study was carried out using 96 Swiss Albino male rats weighing about 200-220 g. Combination therapy induced a significant decrease in blood glucose level in alloxan induced diabetic rats, from 33.75 ± 1.65 to 5.80 ± 0.07 mmol/l 2 h after last dose administration, after 4 weeks treatment. In case of dyslipidemic effect, combination therapy reduced total cholesterol (45 %), triglyceride (36 %) and low density lipoprotein-cholesterol (32 %) levels significantly and increased high density lipoprotein-cholesterol level (57 %) in comparison with their respective diabetic control groups. Results of this study showed that combination therapy effectively decreased SGPT (ALAT) (55 %) and SGOT (ASAT) (51 %) in comparison with diabetic control group. It was also observed that catalase and superoxide dismutase enzyme activity was increased by 58 and 91 % respectively in comparison with diabetic control group after 4 weeks treatment with combination of both drugs. In conclusion, these findings of combination therapy (glibenclamide and simvastatin) on alloxan induced diabetes in rats are significantly better than monotherapy using single drug. The results of the present study suggest that, combination of the fixed dose of glibenclamide and simvastatin might be efficacious in patients with diabetic dyslipidemia and increased oxidative stress. Furthermore, this combination therapy offer dosage convenience to the patients and by virtue of its dual mode of action might be a useful addition to the therapeutic armamentarium for patients with diabetic dyslipidemia and oxidative stress.

Study of sintering behavior of vapor forms of 1-octanethiol coated copper nanoparticles for application to ink-jet printing technology.

Sub-50 nm copper nanoparticles coated with sub-5 nm 1-octanethiol layer for oxidation inhibition were examined to confirm the 1-octanethiol removal temperature as the sub-50 nm copper nanoparticles are sintered. As a result, 1-octanethiol Self-Assembled Multi-layers (SAMs) on sub-50 nm copper nanoparticles were successfully removed before sintering of copper nanoparticles so that a high density of copper line could be obtained. Finally, the line resistivity was measured and compared to verify the effect of sintering in different atmospheres. As a result, electrical resistivity of the copper pattern sintered in hydrogen atmosphere was measured at 6.96 x 10(-6) ohm-cm whereas that of the copper pattern sintered in mixed gas atmosphere was measured at 2.62 x 10(-5) ohm-cm. Thus, sintering of copper patterns was successfully done to show low electrical resistivity values. Moreover, removal of 1-octanethiol coating after sintering process was confirmed using X-ray photoelectron spectroscopy (XPS) analysis. By showing no sulfur content, XPS results indicate that 1-octanethiol is completely removed. Therefore, the vapor form of 1-octanethiol coating layers can be safely used as an oxidation inhibition layer for low temperature sintering processes and ink-jet applications.

Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites.

In this work, palm and coir fiber reinforced polypropylene bio-composites were manufactured using a single extruder and injection molding machine. Raw palm and coir were chemically treated with benzene diazonium salt to increase their compatibility with the polypropylene matrix. Both raw and treated palm and coir fiber at five level of fiber loading (15, 20, 25, 30 and 35 wt.%) was utilized during composite manufacturing. Microstructural analysis and mechanical tests were conducted. Comparison has been made between the properties of the palm and coir fiber composites. Treated fiber reinforced specimens yielded better mechanical properties compared to the raw composites, while coir fiber composites had better mechanical properties than palm fiber ones. Based on fiber loading, 30% fiber reinforced composites had the optimum set of mechanical properties.