Photocatalytic and combined anaerobic-photocatalytic treatment of textile dyes.

A photocatalytic process based on immobilized titanium dioxide was used to treat crude solutions of azo, anthraquinone and phthalocyanine textile dyes. In addition, the process was applied to the treat autoxidized chemically reduced azo dyes, i.e. representatives of recalcitrant dye residues after biological sequential anaerobic-aerobic treatment. Photocatalysis was able to remove more than 90% color from crude as well as autoxidized chemically reduced dye solutions. UV-absorbance and COD were also removed but to a lower extent (50% in average). The end products of photocatalytic treatment were not toxic toward methanogenic bacteria. The results demonstrate that photocatalysis can be used as a pre- or post-treatment method to biological anaerobic treatment of dye-containing textile wastewater.

Application of a sequential batch reactor system for textile dyes degradation: comparison between azo and phthalocyanine dyes.

Photocatalysis on supported TiO2 was combined with aerobic biological treatment in a sequential batch reactor to compare the degradation of two textile dyes: a blue azo dye (DR KBL CDG) and a green phthalocyanine dye (DR K4GN). Three reactors were run in parallel. SBR1 was used as a reference and was fed with urban wastewater only. SBR2 and SBR3 were fed with the same urban wastewater combined with pretreated (for SBR2) and non-pretreated (for SBR3) dye solution. For an azo dye concentration of 12 mg/L decolouration yields of 78 and 27% were achieved, respectively, in SBR2 and SBR3. For the phthalocyanine dye, the decolouration yields decreased to 24 and 15%, respectively. Concerning COD removal it decreases for both dyes with and without pretreatment, when the dye concentration increases. Although a detrimental effect on biomass could be observed, bacteria were able to cope with the inhibitory effect of the dyes.