Do hip resurfacing and short hip stem arthroplasties differ from conventional hip stem replacement regarding impingement-free range of motion?

Total hip joint replacement (THR) is clinically well-established. In this context, the resulting range of motion (ROM) is crucial for patient satisfaction when performing joint movements. However, the ROM for THR with different bone preserving strategies (short hip stem and hip resurfacing) raises the question of whether the ROM is comparable with conventional hip stems. Therefore, this computer-based study aimed to investigate the ROM and type of impingement for different implant systems. An established framework with computer-aided design 3D models based on magnetic resonance imaging data of 19 patients with hip osteoarthritis was used to analyse the ROM for three different implant systems (conventional hip stem vs. short hip stem vs. hip resurfacing) during typical joint movements. Our results revealed that all three designs led to mean maximum flexion higher than 110°. However, hip resurfacing showed less ROM (-5% against conventional and -6% against short hip stem). No significant differences were observed between the conventional and short hip stem during maximum flexion and internal rotation. Contrarily, a significant difference was detected between the conventional hip stem and hip resurfacing during internal rotation (p = 0.003). The ROM of the hip resurfacing was lower than the conventional and short hip stem during all three movements. Furthermore, hip resurfacing shifted the impingement type to implant-to-bone impingement compared with the other implant designs. The calculated ROMs of the implant systems achieved physiological levels during maximum flexion and internal rotation. However, bone impingement was more likely during internal rotation with increasing bone preservation. Despite the larger head diameter of hip resurfacing, the ROM examined was substantially lower than that of conventional and short hip stem.

Dual-Mobility Cups in Primary Total Hip Arthroplasty. / Tripolare Pfannen in der Primärhüftendoprothetik.

Dual-mobility cups (DMCs) were introduced in France more than 40 years ago and are increasingly used not only in hip revision but also primary hip arthroplasty. Due to a simulated large-head articulation and increased jumping distance, DMCs can contribute to a high range of motion in the hip joint and reduce the risk of instability. Numerous studies have reported low dislocation rates and high survival rates in the mid-term follow-up. Nevertheless, long-term data, especially on primary hip replacement, remain limited, and the effect of recent designs and material innovations is still unclear. Therefore, primary DMCs are mainly proposed in patients at high risk for dislocation (i.e. pelvitrochanteric insufficiency, compromised spinopelvic mobility, neuromuscular disorders, obesity and femoral neck fractures). Based on a review of recently published studies referring to these indications, the current study discusses the advantages and disadvantages of DMCs.

The incidence of adverse local tissue reaction due to head taper corrosion after total hip arthroplasty using V40 taper and 36 mm CoCr head.

AIMS: Head-taper corrosion is a cause of failure in total hip arthroplasty (THA). Recent reports have described an increasing number of V40 taper failures with adverse local tissue reaction (ALTR). However, the real incidence of V40 taper damage and its cause remain unknown. The aim of this study was to evaluate the long-term incidence of ALTR in a consecutive series of THAs using a V40 taper and identify potentially related factors. METHODS: Between January 2006 and June 2007, a total of 121 patients underwent THA using either an uncemented (Accolade I, made of Ti12Mo6Zr2Fe; Stryker, USA) or a cemented (ABG II, made of cobalt-chrome-molybdenum (CoCrMo); Stryker) femoral component, both with a V40 taper (Stryker). Uncemented acetabular components (Trident; Stryker) with crosslinked polyethylene liners and CoCr femoral heads of 36 mm diameter were used in all patients. At a mean folllow-up of 10.8 years (SD 1.1), 94 patients (79%) were eligible for follow-up (six patients had already undergone a revision, 15 had died, and six were lost to follow-up). A total of 85 THAs in 80 patients (mean age 61 years (24 to 75); 47 (56%) were female) underwent clinical and radiological evaluation, including the measurement of whole blood levels of cobalt and chrome. Metal artifact reduction sequence MRI scans of the hip were performed in 71 patients. RESULTS: A total of 20 ALTRs were identified on MRI, with an incidence of 26%. Patients with ALTR had significantly higher median Co levels compared with those without ALTR (2.96 µg/l (interquartile range (IQR) 1.35 to 4.98) vs 1.44 µg/l (IQR 0.79 to 2.5); p = 0.019). Radiological evidence of osteolysis was also significantly associated with ALTR (p = 0.014). Median Cr levels were not significantly higher in those with ALTR compared with those without one (0.97 µg/l (IQR 0.72 to 1.9) v 0.67 µg/l (IQR 0.5 to 1.19; p = 0.080). BMI, sex, age, type of femoral component, head length, the inclination of the acetabular component, and heterotopic ossification formation showed no significant relationship with ALTR. CONCLUSION: Due to the high incidence of local ALTR in our cohort after more than ten years postoperatively, we recommend regular follow-up investigation even in asymptomatic patients with V40 taper and metal heads. As cobalt levels correlate with ALTR occurrence, routine metal ion screening and consecutive MRI investigation upon elevation could be discussed. Cite this article: Bone Joint J 2022;104-B(7):852-858.

Cementation of a dual mobility cup in a well-fixed acetabular component- a reliable option in revision total hip arthroplasty?

BACKGROUND: The "cup-in-cup" technique allows for revision of failed total hip arthroplasty (THA) when the cementless cup is well fixed. Furthermore, it can be used for liner wear or mechanical failure where liner replacement may be impossible or impractical. Recently, the "cup-in-cup" technique in combination with dual mobility cups (DMC) has drawn increased attention. Our aim was to report on the clinical and radiographic outcomes following this surgery. METHODS: From 2015 to 2020, 33 patients treated with the DMC- "cup in cup" technique were retrospectively reviewed. Fourteen patients had died while 19 were available for the final follow-up (FU), of which 15 underwent both a radiograph and a FU visit, 2 underwent a radiograph only and 2 underwent a telephone interview only. Patient-related outcome measures included the HHS and the WOMAC. Radiographs were assessed for implant loosening and positioning. Primary endpoint was revision of any cause and secondary endpoint was loosening of the DMC at the latest FU. The survival analysis was conducted using the Kaplan-Meier method. RESULTS: The mean age at surgery was 78.6 ± 7.1 (63-93) years and the mean surgery duration was 124.4 ± 52.0 (60-245) minutes. Recurrent dislocation (42.4%), periprosthetic fracture (39.4%) and polyethylene wear (6.1%) were the most frequent reasons for surgery. The mean FU duration (n = 19) was 28.5 ± 17.3 (3-64) months. The mean HHS score at FU was 59.4 ± 22.2 (29-91) and the mean WOMAC score was 59.7 ± 25.6 (15.6-93.8). Two cups were revised due to instability and one revision was performed due to periprosthetic joint infection, accounting for an overall cup survival rate of 86.8% after a mean FU of 22.9 ± 18.0 (1.5-64.6) months. The survival rate free of loosening was 90.9% after a mean FU of 22.3 ± 18.5 (1.5-64.7) months. CONCLUSIONS: We found that the cementation of a DMC in a well-fixed cup is a promising short- to mid-term treatment addressing THA instability especially in elderly and frail patients, who benefit from a reduced operation time. Proper cementation technique, adequate cup positioning as well as selection of a sufficiently large DMC are crucial for treatment success. Longer FUs will be needed in the future in order to further prove the benefit of this technique.

MRI-based assessment of acetabular version and coverage after previous Pemberton osteotomy in skeletally mature patients.

PURPOSE: In hip dysplasia the Pemberton osteotomy can modify the shape of the acetabulum and is indicated for children aged between two and 12 when the triradiate cartilage is still open. However, there have been concerns about acetabular retroversion following this type of osteotomy. The studies, however, have been based on plain radiographs. The aim of our investigation was to assess the 3D acetabular orientation in patients with previous Pemberton osteotomy after skeletal maturation. METHODS: Ten patients with 12 operated hips were included who received Pemberton osteotomy for hip dysplasia between January 3, 2005 and March 25, 2011. Mean age at surgery and at follow-up were 7.2 years (sd 3.7) and 19.2 years (sd 3.7), respectively. MRIs were conducted with 1.5 T. Besides the measurement of acetabular version, the analysis included alpha angles, acetabular sector angles (ASAs) as well as modified ASAs (cartilage covered area angles). Furthermore, the presence of osteoarthritis (OA) as well as acetabular retroversion was determined on plain radiographs. Patient-related outcome measures included the international Hip Outcome Tool (iHOT) and EuroQol-5-Dimensions (EQ5D) scores. RESULTS: In comparison with the contralateral native and healthy hips the operated hips showed similar version (19.5° (sd 4.6°) versus 18.6° (sd 7.0°); p = 0.974). Also, there were no differences in terms of femoral head sphericity (alpha angles) and acetabular coverage (ASA angles). Five of 12 Pemberton hips showed signs of beginning OA (Kellgren-Lawrence classification I or II) while none of the non-operated hips did. Patients who received surgery before the age of six years had similar functional and radiological results when compared with patients who were older than six years at surgery. Among all patients, iHOT was 91.9 (sd 10.0) and EQ5D was 90.3 (sd 7.3)). CONCLUSION: The Pemberton osteotomy provides good long-term radiographic and functional results without compromising acetabular version or coverage. LEVEL OF EVIDENCE: Level III: retrospective comparative study.

[Femoral neck stress fractures and femoroacetabular impingement : A retrospective case study and literature review]. / Stressfrakturen des Schenkelhalses bei femoroazetabulärem Impingement : Eine retrospektive Fallstudie und Literaturübersicht.

BACKGROUND: Femoroacetabular impingement (FAI) can lead to morphologic damage of both the acetabulum and the femoral neck. Recent reports have found an association between impingement deformities and the development of femoral neck stress fractures. The aim of this study was to report a series of patients with these findings and to update the current evidence on the topic. MATERIAL AND METHODS: 5 patients (6 cases) with atraumatic femoral neck fractures and FAI were identified in the Dresden hip registry from 2015 to 2018. Demographic data, comorbidities, radiographic results and bone metabolism results were described. A literature search was conducted using keywords related to femoral neck stress fractures and FAI syndrome. RESULTS: The average age of the series was 39 (range: 22-52), 2 patients were female and 3 male. A total of 12 surgical procedures were performed. 4 of the 5 patients showed radiographic features of pincer and/or cam-FAI, whereas 3 patients had a decreased femoral antetorsion (-7° to +7° antetorsion). In 3 patients, magnetic resonance imaging revealed additional signs of avascular necrosis ARCO I. There was a lack of FAI-specific treatment recommendations in the available literature. DISCUSSION: Radiographic results of the patients evaluated suggested that impingement-associated deformities of the hip may cause femoral neck stress fractures, which is in line with the available literature. This potential coincidence should be integrated in diagnostic algorithms and therapeutic approaches.

How does former Salter innominate osteotomy in patients with Legg-Calvé-Perthes disease influence acetabular orientation? An MRI-based study.

Salter innominate osteotomy (SIO) has been successfully used in the treatment of Legg-Calvé-Perthes disease (LCPD). Recent studies that have raised concerns about acetabular retroversion after SIO have been based on plain radiographs. In order to assess the true acetabular orientation, the present study uses a specific magnetic resonance imaging (MRI) technique. In addition, the association between acetabular morphology and clinical function as well as health-related quality of life was assessed. Twenty-three patients with 24 operated hips who underwent SIO for LCPD between January 2004 and November 2014 were included. Mean age was 8.5 ± 2.2 years at surgery and 18.5 ± 2.9 years at follow-up. MRIs were conducted at 1.5 T using radial sequences. The analysis included the acetabular version, acetabular sector angles (ASAs) and alpha angles. Plain radiographs were used in order to obtain the Stulberg classification. Patient-related outcome measures included the international Hip Outcome Tool and Euroqol-5 dimensions scores. In comparison to the non-operated side, the MRI of previously operated hips showed no difference of version at the center of the femoral head but significantly decreased version just below the roof level. As a marker for posterior acetabular coverage, the ASAs between 9 and 11 o'clock were significantly decreased when compared with non-operated hips. In hips with a mild acetabular retroversion (<15°), the function was significantly decreased when compared with non-retroverted hips. The SIO is an effective tool in order to restore acetabular containment in LCPD. When compared with the non-operated hips, our collective displays only moderate changes of acetabular orientation and coverage.

Acetabular- and femoral orientation after periacetabular osteotomy as a predictor for outcome and osteoarthritis.

BACKGROUND: Periacetabular osteotomy is a successful treatment for hip dysplasia. The results are influenced, however, by optimal positioning of the acetabular fragment, femoral head morphology and maybe even femoral version as well as combined anteversion have an impact. In order to obtain better insight on fragment placement, postoperative acetabular orientation and femoral morphology were evaluated in a midterm follow-up in regard to functional outcome and osteoarthritis progression. METHODS: A follow-up examination with 49 prospectively documented patients (66 hips) after periacetabular osteotomy (PAO) was performed after 62.2 ± 18.6 months. Mean age of patients undergoing surgery was 26.7 ± 9.6 years, 40 (82%) of these patients were female. All patients were evaluated with an a.p. pelvic x-ray and an isotropic MRI in order to assess acetabular version, femoral head cover, alpha angle, femoral torsion and combined anteversion. The acetabular version was measured at the femoral head center as well as 0.5 cm below and 0.5 and 1 cm above the femoral head center and in addition seven modified acetabular sector angles were determined. Femoral torsion was assessed in an oblique view of the femoral neck. The combined acetabular and femoral version was calculated as well. To evaluate the clinical outcome the pre- and postoperative WOMAC score as well as postoperative Oxford Hip Score and Global Treatment Outcome were analyzed. RESULTS: After PAO acetabular version at the femoral head center (31.4 ± 9.6°) was increased, the anterior cover at the 15 o'clock position (34.7 ± 15.4°) was reduced and both correlated significantly with progression of osteoarthritis, although not with the functional outcome. Combined acetabular and femoral torsion had no influence on the progression of osteoarthritis or outcome scores. CONCLUSION: Long-term results after PAO are dependent on good positioning of the acetabular fragment in all 3 planes. Next to a good lateral coverage a balanced horizontal alignment without iatrogenic pincer impingement due to acetabular retroversion, or insufficient coverage of the anterior femoral head is important.

MRI-based static and functional assessment of complex hip deformities in comparison with CT: a validation study.

OBJECTIVE: This study aimed at investigating the agreement between predefined quantitative parameters of hip morphology derived from magnetic resonance imaging (MRI) and virtual range of motion (ROM) analysis using computed tomography (CT) as standard of reference. METHODS: Twenty patients (13 females, 7 males, 16-59 years) with hip deformities underwent MRI prior to surgery. Clockwise alpha angle, femoral head and neck diameter, collum caput diaphysis angle, femoral torsion, center-edge angles, acetabular coverage of the femoral head, sourcil angle, and acetabular anteversion were measured. Additionally, tern single and combined movements were simulated using a motion analysis program. The MRI findings were compared with the corresponding results obtained by CT. Correlation of MRI with CT was assessed using different statistical methods (intraclass correlation coefficient, Bland-Altmann plot, two one-sided t test), and linear regression analysis was performed. RESULTS: The results showed near-perfect intraclass correlation coefficients (ICCs) for anteversion (0.95), acetabular sector angles (0.98-0.99), sourcil angle (0.95), and acetabular coverage (anterior 0.96, posterior 0.99). Intermethod correlation for femoral parameters showed almost perfect agreement except for the alpha angle (0.73-0.97). No significant proportional bias was detected for traditional acetabular and femoral parameters. ROM analysis was performed for 370 movements in 37 hips. For 78.4% (290/370) of the movements analysed, neither CT nor MRI detected impingement across the physiological ROM. For 18.6% (69/370) of the movements, impingement was detected by both CT and MRI, while 2.2% (8/370) of the movements with impingement in CT showed no impingement in MRI, and 0.8% (3/370) of the movements with impingement in MRI had no corresponding result in CT. CONCLUSION: Finally, it was concluded that MRI-based assessment of hip morphology and virtual ROM analysis is feasible and can be performed with good intermethod agreement in comparison to the gold standard (CT). Therefore, MRI appears to be substantially equivalent to CT for use in virtual ROM analysis and so may reasonably be used in place of CT for this purpose.

Arthroscopic matrix-associated, injectable autologous chondrocyte transplantation of the hip: significant improvement in patient-related outcome and good transplant quality in MRI assessment.

PURPOSE: Acetabular chondral lesions are common in patients with FAI. For large full-thickness cartilage defects, arthroscopic matrix-associated autologous chondrocyte transplantation (MACT) using an injectable in situ crosslinking product is an option. Aim of the study was to evaluate clinical and MRI results 12 months after MACT of acetabular cartilage defects in FAI patients. METHODS: We report data on 21 patients with a focal cartilage defect of the hip [2.97 ± 1.44 cm2 (mean ± SD)] caused by FAI treated with an arthroscopically conducted MACT combined with FAI surgery. The results were assessed with patient-reported outcome measures (iHOT33, EQ-5D) pre- as well as post-operatively and by MRI using MOCART scoring system 6 and 12 months post-operatively. RESULTS: The iHOT33 score improved from 52.9 ± 21.14 (mean ± SD) pre-operative to 81.08 ± 22.04 (mean ± SD; p = 0.0012) 12 months post-operatively. The lower the pre-operative iHOT33 score and the larger the defect size, the greater the observed improvement compared to pre-operative scores at 12 months. Patients showed a significant improvement in EQ-5D-5L index value (p = 0.0015) and EQ-5D VAS (p = 0.0006). MRI analysis after 12 months revealed a complete integration of the transplant in 16 of 20 patients. CONCLUSIONS: Injectable MACT is a promising minimally invasive treatment option for full-thickness cartilage defects of the hip caused by FAI. A significant improvement in symptoms and function associated with an increase in quality of life was detected in patients treated with injectable MACT combined with FAI surgery. This is of considerable clinical relevance, since, in addition to the elimination of the mechanical cause, MACT allows the successful therapy of consequential cartilage damage. LEVEL OF EVIDENCE: Level 4, case series.

[Diagnostic algorithm "FAI and sports hernia" : Results of the consensus meeting for groin pain in athletes]. / Diagnostik-Algorithmus Grenzbereich "FAI und Sportlerleiste" : Ergebnisse des Konsensustreffens Leistenschmerz beim Sportler.

As a result of the complexity and diversity of diseases in the region of the groin, differentiation of the various soft-tissue and bone pathologies remains a challenge for differential diagnosis in routine clinical practice. In the case of athletes with pain localized in the area of the groin, femoroacetabular impingement (FAI) and athlete's groin must be considered as important causes of the groin pain, whereby the common occurrence of double pathologies further complicates diagnosis. Despite the importance of groin pain and its differential diagnoses in everyday clinical practice, there has been a lack of recognized recommendations for diagnostic procedure to date. To this end, a consensus meeting was held in February 2017, in which a group composed equally of groin and hip surgeons took part. With the formulation of recommendations and the establishment of a practicable diagnostic path, colleagues that are involved in treating such patients should be sensitized to this issue and the quality of the diagnosis of groin pain improved in routine clinical practice.

Is MRI an adequate replacement for CT scans in the three-dimensional assessment of acetabular morphology?

BACKGROUND: Appropriate three-dimensional imaging of the hip joint is a substantial prerequisite for planning and performing surgical correction of deformities. Although surgeons still use computed tomography (CT), modern and fast acquisition techniques of volumetric imaging using magnetic resonance imaging (MRI) for pelvic measurements enable similar resolution. PURPOSE: This study was designed to determine if already described measures of acetabular morphology are comparable in both techniques and if assessment can be performed with equal intra-observer and inter-observer reliability. MATERIAL AND METHODS: Thirty-two hips (16 patients) were examined with a pelvic CT and a MRI with 3-T. Pelvic orientation was standardized by each observer in coronal, axial, and sagittal planes. Acetabular version as well as seven acetabular sector angles were measured by two observers twice with a minimum of four weeks between sessions. RESULTS: Inter-rater reliability showed excellent results for intra- and inter-rater reliability for CT (0.977-0.999) and MRI (0.969-0.998) measuring acetabular version and sector angles. Evaluating the reliability of CT and MRI for each observer revealed excellent results (0.972-0.998). Evaluating the Bland-Altman plots for intra-observer reliability showed an equal distribution of angles, within acceptable 95% limits of agreement. The same results were observed for inter-observer reliability evaluating CT and MRI as well as inter-method reliability. CONCLUSION: Modern MRI scans are equally applicable to assess the bony pelvis as CT scans. In addition, MRI would enable the examination of soft tissues such as chondrolabral structures and muscle in the same examination. Since hip-preserving surgery is mostly conducted in younger patients, the reduction of radiation exposure is a benefit.

Adverse reaction to metal debris in a consecutive series of DUROM™ hip resurfacing: pseudotumour incidence and metal ion concentration.

INTRODUCTION: The aim of this study was to evaluate the incidence of adverse reactions to metal debris (ARMD) in a consecutive series of DUROM™ Hip Resurfacing Arthroplasty (HRA) at mid-term follow-up. METHODS: Between October 2003 and March 2007 a total of 134 consecutive DUROM™ HRA in 121 patients were performed at our institution. Follow-up could be obtained in 101 unrevised patients (83%) at a mean time of 8.51 ± 0.97 years postoperatively and included patient-related outcome measurement, plain radiographs, MARS-MRI as well as whole blood metal ion assessment. RESULTS: 17 (16.5%) out of 103 hips revealed pseudotumour occurrence in MRI investigation, 1 (10.6%) with a diameter of ≥2 cm. Higher incidence of pseudotumours was found patients with femoral component size <50 mm. 38 patients had elevated cobalt levels, 36 of them (35%) in the range of 2-7 µg/l and 2 patients (1.9%) at a rate of >7 µg/l. In contrast to cobalt determination, only elevated chromium values showed a positive association with pseudotumour occurrence and size. DISCUSSION: A significant proportion of patients developed pseudotumours and metal ion elevation in a consecutive cohort of DUROM™ HRA after mid-term follow-up. The incidence, however, seems not to differ from results of other well performing resurfacing brands; clinical relevance of our findings is unclear. Regarding potential local as well as systemic effects of metal particle release, close follow-up of patients is essential, even with clinically well-performing implants.

Patient-reported outcomes after revision surgery compared to primary total hip arthroplasty.

INTRODUCTION: Patients who undergo either primary or revision total hip arthroplasty (THA) mainly expect improvement in pain, function/activity and quality of life. The purpose of the study was to measure the degree of short-term and medium-term improvement and the differences in patient-reported outcome that can be expected in patients undergoing revision THA, compared to patients undergoing primary THA. METHODS: In this study, the results of patient-reported outcome measurements were compared in 124 matched patients, who underwent revision surgery and primary THA between 01/2007 and 12/2009. Assessment was performed at short-term and medium-term follow-up and included the WOMAC score, the UCLA activity score and EuroQol scores. RESULTS: 6 months after revision THA, the mean total WOMAC score improved by 22.1 points, the UCLA activity score by 0.6 points and the EuroQol-Index by 0.2 points. After primary THA, the improvement was 41.4 points on the WOMAC, 1.1 points on the UCLA and 0.3 points on the EuroQol-Index. At medium-term follow-up, 3.6 years after revision surgery and 2.3 years after primary THA, patients undergoing revision THA showed significantly less overall improvement, as well as lower final outcome scores, than patients undergoing primary THA. CONCLUSIONS: Patients undergoing revision arthroplasty, as well as patients undergoing primary THA, can expect major improvement in function, activity and quality of life postoperatively. However, overall level of improvement, as well as peak attainable outcome levels, are lower after revision surgery than after primary THA. Appropriate information for patients who undergo hip revision surgery is necessary in order to avoid unrealistic expectations and postoperative dissatisfaction.

What Are the Results of Surgical Treatment of Hip Dysplasia With Concomitant Cam Deformity?

BACKGROUND: Periacetabular osteotomy (PAO) is a reliable procedure to correct the deficient acetabular coverage in hips with developmental dysplasia. It is unclear how the presence of additional femoral cam-type deformity might influence the clinical and radiographic treatment results of PAO. QUESTIONS/PURPOSES: (1) Are there differences in clinical scores (WOMAC, EQ-5D) and examination findings (impingement sign) or radiographic measures of acetabular orientation and head sphericity after PAO for isolated acetabular dysplasia when compared with the combined pathology of dysplasia and additional femoral cam deformity? (2) Are these clinical and radiographic findings after combined surgical therapy for additional cam deformity influenced by different pathology-adjusted surgical techniques? METHODS: From July 2005 to December 2010, 86 patients (106 hips) underwent PAO for hip dysplasia. Surgical and outcome data were prospectively collected and retrospectively reviewed in a comparative observational study. Indications for surgery were a lateral center-edge angle less than 25° and hip pain for at least 6 months. The contraindications for surgery were advanced radiographic osteoarthritis (Kellgren-Lawrence Grade 3), incongruency of joint space, and patient age > 50 years. Depending on preoperative hip ROM, impingement test, and presence of a radiographically visible cam deformity, treatment allocation was performed: Group I: isolated PAO in patients without symptomatic asphericity, Group IIa: PAO with subsequent osteochondroplasty through arthrotomy for patients with symptomatic cam deformity and no labrochondral pathology, and Group IIb: arthroscopically assisted osteochondroplasty and additional labrochondral repair with subsequent PAO when patients had labrochondral lesions in addition to a symptomatic cam deformity. Clinical outcome (impingement test, EQ-5D, WOMAC) as well as radiographic parameters (lateral center-edge angle, crossover sign, alpha angle, osteoarthritis grade) were obtained after a mean followup of 63 ± 18 months (range, 31-102 months) and compared with the baseline data. Eleven patients (13%) were lost to followup. With the numbers available, our study had 80% power to detect a difference between Groups I and II of 10 points on the WOMAC scores. RESULTS: There was no difference in the increase of WOMAC scores in patients with PAO alone (Group I; preoperative score 74 ± 17 versus postoperative 91 ± 15, p = 0.033) when compared with PAO and concurrent osteochondroplasty (Groups II A and B preoperative 73 ± 19 versus postoperative 90 ± 13 p < 0.001). The mean postoperative alpha angles in Group II (38° ± 6°) improved when compared with preoperative values (56° ± 15°; p < 0.001) and were even lower than native offset alpha angles in Group I (47° ± 11°). Clinical scores as well as postoperative radiographic parameters were not different between patients with conventional osteochondroplasty alone (Group IIA) and patients with arthroscopically assisted cam resection and intraarticular labrochondral repair (Group IIB). CONCLUSIONS: With the numbers available, we detected no differences in outcome scores and radiographic results between patients who had been treated with PAO alone and patients who underwent combined PAO and offset correction for cam deformity. Although arthroscopically assisted treatment of advanced labrochondral lesions together with osteochondroplasty is possible during PAO and the results were not different in this small study when compared with patients with PAO and osteochondroplasty alone, the type and extent of damage that would indicate additional cartilage surgery over cam resection alone remain unclear. LEVEL OF EVIDENCE: Level III, therapeutic study.

Patient-reported outcomes and outcome predictors after primary total hip arthroplasty: results from the Dresden Hip Surgery Registry.

PURPOSE: To investigate response rates and predictors of treatment success in patients treated with total hip arthroplasty (THA). METHODS: A prospective register-based cohort study including all consecutive primary THAs was conducted -between 01/2006-12/2011. Primary outcomes were changes in WOMAC, according to OMERACT-OARSI, and minimal important difference (MID) in quality of life (EQ-5D) between baseline and 6-month follow-up. Socioeconomic and clinical predictors on treatment success were analysed by bivariate/multivariate regression. RESULTS: The study population included 2,553 patients (mean age 60.8 years; 52.8% female) and 2,391 (93.7%) at follow-up. 2,194 (93.8%) (OMERACT-OARSI) and 2,131 (83.5%) (EQ-5D MID) patients were classified as responders. Predictors for treatment success vs treatment failure were not identified. Obese patients and patients living alone showed less pronounced, and patients with higher educational level more pronounced, improvements in the WOMAC at follow-up. CONCLUSIONS: Treatment with THA leads to improvement in function, decline in pain and increase in quality of life in the vast majority of patients.

Revision Rate and Patient-Reported Outcome After Hip Resurfacing Arthroplasty: A Concise Follow-Up of 1064 Cases.

We investigated survival and outcomes in 1064 HRA hips operated on between 1998 and 2009. After a mean of 7.8 years, 771 patients (72.4%) completed questionnaires, with a further 160 (15.0%) contacted by phone and 18 (1.7%) had died. There were 54 revisions. Overall implant survival at 10 years was 94.4%. Independent predictors of lower survival were female gender (P=0.015) and cup inclination ≥55° (P<0.001). Woman with cup inclination ≥55° had the highest failure rate with 10-year survival of 69.3%. Vertical cup inclination ≥55° did worse than cups <55° in both men and women. Overall men did better than women, and men with cups <55 degrees did best. Men had significantly better patient-reported outcome scores than woman.

Effect of surgical experience on imageless computer-assisted femoral component positioning in hip resurfacing--a preclinical study.

BACKGROUND: The clinical outcome of hip resurfacing (HR) as a demanding surgical technique associated with a substantial learning curve depends on the position of the femoral component. The aim of the study was to investigate the effects of the level of surgical experience on computer-assisted imageless navigation concerning precision of femoral component positioning, notching, and oversizing rate, as well as operative time. METHODS: Three surgeons with different levels of experience in both HR and computer-assisted surgery (CAS) prepared the femoral heads of 54 synthetic femurs using the Durom(TM) Hip Resurfacing (Zimmer, Warsaw, IN, USA) system. Each surgeon prepared a total of 18 proximal femurs using the Navitrack® system (ORTHOsoft Inc., Montreal, Canada) or the conventional free-hand Durom(TM) K-wire positioning jig. The differences between planned and postoperative stem shaft angle (SSA) and anteversion angle in standardized x-rays were measured and the operative time, not including the time for calibrating the CAS-system, was documented. Notching was evaluated by the three surgeons in a randomized manner. Oversizing was determined by the difference of the preoperative determined cap and the cap size advised by the CAS-system. RESULTS: CAS significantly reduced the overall mean deviation between planned and postoperative SSA in comparison with the conventional procedure (mean ± SD, 1 ± 1.7° vs. 7.4 ± 4.4°, P < 0.01) regardless of the surgeon's level of experience. The incidence of either varus or valgus SSA deviations exceeding 5° were 1/27 for CAS and 15/27 for the conventional method, respectively (P < 0.001), corresponding to a reduction by 97%. Using CAS, the rate of notching was reduced by 100%. CONCLUSIONS: The accuracy of femoral HR component orientation is significantly increased by use of CAS regardless of the surgeon's level of experience in our preclinical study. Thus, imageless computer-assisted navigation can be a valuable tool to improve implant positioning in HR for surgeons at any stage of their learning curve.

Thoracal flat back is a risk factor for lumbar disc degeneration after scoliosis surgery.

BACKGROUND CONTEXT: Lumbar segments below fused scoliotic spines are thought to be exposed to extraordinary stress. Although positive sagittal imbalance has come into focus, reports about factors influencing the outcome of these segments remain inconclusive. PURPOSE: Our study aimed at identifying spinal risk factors for the development of lumbar degenerative disc disease (DDD) in surgically treated patients with adolescent idiopathic scoliosis (AIS). STUDY DESIGN/SETTING: Retrospective comparative prognostic study (Level III) was conducted. Thirty-three patients were seen at an average follow-up of 7.5 years after either isolated selective anterior (n=18) or long combined anterior-posterior fusion (n=15) for AIS. OUTCOME MEASURES: Self-reported Scoliosis Research Society 22 questionnaire, physical examination including the detection of segmental pain and unspecific back pain, preoperative and postoperative whole-spine standing radiographs, and magnetic resonance imaging were obtained. METHODS: Radiographic evaluation included the measurement of regional, coronal, and sagittal curve parameters and the assessment of spinal balance. Magnetic resonance imaging evaluation was done for preoperative and postoperative lumbar discs, according to the classification of Pfirrmann. RESULTS: Patients with low DDD (Pfirrmann grading <3) had a significantly higher thoracal kyphosis angle (mean 28°) than patients with advanced DDD (mean 15°). There was a trend toward a more flat-type lumbar lordosis in patients with severe DDD. Positive sagittal imbalance was associated with advanced DDD. Follow-up coronal parameters, trunk imbalance, instrumentation length, and lowest instrumented vertebra selection had no influence on DDD. Specific segmental pain could be attributed to a significantly higher coronal trunk imbalance (21 vs. 11 mm). CONCLUSIONS: This study establishes thoracal flat back as a risk factor for lumbar DDD after spinal fusion and supports the pathogenetic role of positive sagittal imbalance in this process.

Is range of motion after cruciate-retaining total knee arthroplasty influenced by prosthesis design? A prospective randomized trial.

Improvement in knee flexion is a major expectation for many patients undergoing total knee arthroplasty (TKA). One hundred and twenty two patients were randomized to receive a cruciate-retaining standard or high-flexion TKA. Range of motion (ROM) and functional outcomes were assessed. The high flexion implants had a greater intraoperative ROM than standard implants. The mean flexion preoperatively, intraoperatively and at the one year follow-up was 107.4°, 123.0° and 108.9° in the standard group and 109.9°, 129.1° and 109.7° in the high-flexion TKA group. These differences were not significant preoperatively and at follow-up, but intraoperatively (P < 0.001). In multivariate analysis preoperative knee flexion was the only significant factor influencing knee flexion at follow-up. No differences in the Knee Society Score or SF 36 were observed.