IMPROVED Cr II log(gf ) VALUES AND ABUNDANCE DETERMINATIONS IN THE PHOTOSPHERES OF THE SUN AND METAL-POOR STAR HD 84937.

New emission branching fraction (BF) measurements for 183 lines of the second spectrum of chromium (Cr II) and new radiative lifetime measurements from laser-induced fluorescence for 8 levels of Cr+ are reported. The goals of this study are to improve transition probability measurements in Cr II and reconcile solar and stellar Cr abundance values based on Cr I and Cr II lines. Eighteen spectra from three Fourier Transform Spectrometers supplemented with ultraviolet spectra from a high-resolution echelle spectrometer are used in the BF measurements. Radiative lifetimes from this study and earlier publications are used to convert the BFs into absolute transition probabilities. These new laboratory data are applied to determine the Cr abundance log ε in the Sun and metal-poor star HD 84937. The mean result in the Sun is 〈logε (Cr II)〉 = 5.624±0.009 compared to 〈logε(Cr I)〉 = 5.644 ± 0.006 on a scale with the hydrogen abundance log ε(H) = 12 and with the uncertainty representing only line-to-line scatter. A Saha (ionization balance) test on the photosphere of HD 84937 is also performed, yielding 〈logε(Cr II)〉 = 3.417 ± 0.006 and 〈log ε(Cr I, lower level excitation potential E. P. >30 eV)〉 = 3.3743±30.011 for this dwarf star. We find a correlation of Cr with the iron-peak element Ti, suggesting an associated nucleosynthetic production. Four iron-peak elements (Cr along with Ti, V, and Sc) appear to have a similar (or correlated) production history-other iron-peak elements appear not to be associated with Cr.

Two-point motional Stark effect diagnostic for Madison Symmetric Torus.

A high-precision spectral motional Stark effect (MSE) diagnostic provides internal magnetic field measurements for Madison Symmetric Torus (MST) plasmas. Currently, MST uses two spatial views--on the magnetic axis and on the midminor (off-axis) radius, the latter added recently. A new analysis scheme has been developed to infer both the pitch angle and the magnitude of the magnetic field from MSE spectra. Systematic errors are reduced by using atomic data from atomic data and analysis structure in the fit. Reconstructed current density and safety factor profiles are more strongly and globally constrained with the addition of the off-axis radius measurement than with the on-axis one only.

Levels of specificity of Xylaria species associated with fungus-growing termites: a phylogenetic approach.

Fungus-growing termites live in obligate mutualistic symbiosis with species of the basidiomycete genus Termitomyces, which are cultivated on a substrate of dead plant material. When the termite colony dies, or when nest material is incubated without termites in the laboratory, fruiting bodies of the ascomycete genus Xylaria appear and rapidly cover the fungus garden. This raises the question whether certain Xylaria species are specialised in occupying termite nests or whether they are just occasional visitors. We tested Xylaria specificity at four levels: (1) fungus-growing termites, (2) termite genera, (3) termite species, and (4) colonies. In South Africa, 108 colonies of eight termite species from three termite genera were sampled for Xylaria. Xylaria was isolated from 69% of the sampled nests and from 57% of the incubated fungus comb samples, confirming high prevalence. Phylogenetic analysis of the ITS region revealed 16 operational taxonomic units of Xylaria, indicating high levels of Xylaria species richness. Not much of this variation was explained by termite genus, species, or colony; thus, at level 2-4 the specificity is low. Analysis of the large subunit rDNA region, showed that all termite-associated Xylaria belong to a single clade, together with only three of the 26 non-termite-associated strains. Termite-associated Xylaria thus show specificity for fungus-growing termites (level 1). We did not find evidence for geographic or temporal structuring in these Xylaria phylogenies. Based on our results, we conclude that termite-associated Xylaria are specific for fungus-growing termites, without having specificity for lower taxonomic levels.

Reliability of an infrared forehead skin thermometer for core temperature measurements.

The SensorTouch thermometer performs an infrared measurement of the skin temperature above the Superficial Temporal Artery (STA). This study evaluates the validity and the accuracy of the SensorTouch thermometer. Two experiments were performed in which the body temperature was measured with a rectal sensor, with an oesophageal sensor and with the SensorTouch. After entering a warm chamber the SensorTouch underestimated the core temperature during the first 10 minutes. After that, the SensorTouch was not significantly different from the core temperature, with an average difference of 0.5 degrees C (SD 0.5 degrees C) in the first study and 0.3 degrees C (SD 0.2 degrees C) in the second study. The largest differences between the SensorTouch and the core temperature existed 15 minutes after the start of the exercise. During this period the SensorTouch was significantly higher than the core temperature. The SensorTouch did not provide reliable values of the body temperature during periods of increasing body temperature, but the SensorTouch might work under stable conditions.

Positive pressure breathing during rest and exercise.

The requirements to maintain a positive pressure with respiratory protection during heavy exercise and the effects on ventilation and feelings of discomfort were investigated. Eight male subjects participated, using the respirator system during rest and exercise at about 80% of their individual maximum power. A blower was used at maximum and medium capacity and at two pressure levels (3 and 15 mbar). Additionally, the mouth pressure was used as a feedback for the blower. The blower decreased the fraction of the breathing cycle with negative pressures from 50% (SD 4%) to 15% (SD 10%) during exercise. Negative pressures occurred at all settings of the blower during exercise. Thus, the currently available commercial blower systems do not supply a sufficient airflow to maintain a positive pressure during heavy exercise. Positive pressure breathing did not affect the ventilation and the circulation. But the oxygen consumption was higher with the blower and respirator than without.

Temperature limit values for gripping cold surfaces.

OBJECTIVES: At the request of the European Commission and in the framework of the European Machinery Directive, research was conducted jointly in five different laboratories to develop specifications for surface temperature limit values for the gripping and handling of cold items. METHODS: Four hundred and fourteen experiments were run where male and female subjects were invited to grip for up to 20 min cold bars of different contact coefficients, i.e. polished wood, nylon, stone, steel and aluminium. The air temperature and the bars' initial surface temperatures ranged between 0 and -30 degrees C for the various experiments. While gripping the bars, either only the hand or the whole body was exposed to cold. RESULTS: The data were used to develop a prediction formula and a graph of the surface temperature limit values in order for the skin contact temperature not to reach <15 degrees C. This duration is shown to offer a significant degree of safety with respect to the minimal surface temperature spontaneously tolerated by the subjects. CONCLUSIONS: Experiments and modelling must be pursued to extend these data to other conditions of exposure.

Development and validation of the predicted heat strain model.

Eight laboratories participated in a concerted research project on the assessment of hot working conditions. The objectives were, among others, to co-ordinate the work of the main European research teams in the field of thermal factors and to improve the methods available to assess the risks of heat disorders at the workplace, and in particular the "Required Sweat Rate" model as presented in International Standard ISO 7933 Standard (1989). The scientific bases of this standard were thoroughly reviewed and a revised model, called "Predicted Heat Strain" (PHS), was developed. This model was then used to predict the minute by minute sweat rates and rectal temperatures during 909 laboratory and field experiments collected from the partners. The Pearson correlation coefficients between observed and predicted values were equal to 0.76 and 0.66 for laboratory experiments and 0.74 and 0.59 for field experiments, respectively, for the sweat rates and the rectal temperatures. The change in sweat rate with time was predicted more accurately by the PHS model than by the required sweat rate model. This suggests that the PHS model would provide an improved basis upon which to determine allowable exposure times from the predicted heat strain in terms of dehydration and increased core temperature.

Clothing evaporative heat resistance--proposal for improved representation in standards and models.

Clothing heat and vapour resistance are important inputs for standards and models dealing with thermal comfort, heat- and cold-stress. A vast database of static clothing heat resistance values is available, and this was recently expanded with correction equations to account for effects of movement and wind on the static value of heat resistance in order to obtain the dynamic heat resistance of clothing ensembles. For clothing vapour resistance, few data were available so far. Indices for vapour permeability (im) and reduction factors for vapour transfer (Fpcl) of clothing were used instead, using a relation between heat and vapour resistance to derive the clothing vapour resistance from the value for clothing heat resistance. This paper reviews the two commonly used approaches (im and Fpcl), as well as five alternative approaches to the problem. The different approaches were evaluated for their accuracy and their usability. The present paper shows that the currently used relations are not adequate when the wearer of the clothing starts moving, or is exposed to wind. Alternative approaches are shown to improve the determination of dynamic clothing vapour resistance, though some are thought to be too complex. An empirical description of the relation between the clothing permeability index (im) and the changes in clothing heat resistance due to wind and movement was selected as the most promising method for deriving clothing vapour resistance. For this method the user needs to know the static heat resistance, the static im value of the clothing and the wind- and movement-speed of the wearer. This method results in a predicted maximal decrease in clothing vapour resistance by 78%, when clothing heat resistance is reduced by 50%, which is consistent with theoretical expectations and available data.

Systemic filling pressure in the intact circulation determined with a slow inflation procedure.

In eight mechanically ventilated, anaesthetized pigs weighing 10.3 +/- 0.8 kg (mean +/- SD) we studied the effect of the inflation time of the lung on the estimation of the mean systemic filling pressure (Psf) from the changes in venous return and central venous pressure during inflation of the lung. For this purpose we applied slow inflation procedures (SIP) to the lung with inflation times of 2.4, 4.8, 7.2, 9.6 and 12 s at tidal volumes (VT) of 15 and 30 ml/kg. The data were compared with the values of Psf obtained from inspiratory pause procedures (IPPs). A linear regression between venous return and central venous pressure applied during a SIP underestimated Psf compared with the value obtained with IPPs. An exponential fit through the values of Psf obtained from the different SIPs predicted an inflation time of about 15 s for an estimation of Psf that is not different from the Psf (IPP). The advantage of the SIP method is that the Psf can be determined much faster than with the method based on IPPs. However, due to the rather long inflation time needed, the method may be only applicable under circumstances where neurohumoral control mechanisms are suppressed as during intensive care and anaesthesia.

Systemic filling pressure in intact circulation determined on basis of aortic vs. central venous pressure relationships.

In the intact circulation, mean systemic filling pressure (Psf) is determined by applying a series of inspiratory pause procedures (IPPs) and using Guyton's equation of venous return (Qv) and central venous pressure (Pcv): Qv = a - b x Pcv. During an IPP series, different tidal volumes are applied to set Pcv at different values. From the linear regression between Qv and Pcv, Psf can be calculated as Psf = a/b. Guyton's equation can also be written as Qv = (Psf - Pcv)/Rsd, where Rsd is the flow resistance downstream of the places where blood pressure is equal to Psf. During an IPP, a steady state is observed. Therefore, we can also formulate the following equation for flow: Qs = (Pao - Psf)/Rsu, where Qs is systemic flow, Rsu is the systemic flow resistance upstream to Psf, and Pao is aortic pressure. Because both flows (Qs and Qv) are equal, it follows that Pao = Psf(1 + Rsu/Rsd) - Rsu/Rsd x Pcv. This equation implies a method to determine mean systemic filling pressure on the basis of Pao measurements instead of flow determinations. Using 22 IPPs in 10 piglets, we determined the mean systemic filling pressure, and we compared the values obtained from the flow curves with those obtained from the aortic pressure curves. The mean difference between the two methods was 0.03 +/- 1.16 mmHg. With the use of Pao measurements, the Psf can be estimated as accurately as in using flow determinations. The advantage of the new method is that estimation of cardiac output is not required.

Near-wall excess of platelets induced by lateral migration of erythrocytes in flowing blood.

In this study we present experimental data on the inhomogeneous distribution of platelets in polyethylene tubes (200 microns diam) based on the inverse Fåhraeus effect for platelets. It is shown that platelets are expelled toward the red blood cell-depleted marginal layer near the tube wall by mutual interaction with erythrocytes. By means of a straightforward model, the near-wall concentration of platelets could be estimated from measurements on the average tubular platelet concentration. The marginal layer originates from the hydrodynamic interaction of the deformable erythrocytes with the tube wall. If the tube diameter is large compared with the size of the erythrocytes, the lateral migration effects can effectively be scaled on the absolute distance between the erythrocytes and the tube wall. This results in the main conclusion that the near-wall concentration of platelets is significantly enhanced up to about seven times the average concentration, practically irrespective of the tube diameter in the range of 100-500 microns. Where comparable, the results of this study are in accordance with experimental data of other authors.

Cultural aspects of health and illness behavior in hospitals.

Health care attitudes reflect the basic world view and values of a culture, such as how we relate to nature, other people, time, being, society versus community, children versus elders and independence versus dependence. Illness behavior determines who is vulnerable to illness and who agrees to become a patient-since only about one third of the ill will see a physician. Cultural values determine how one will behave as a patient and what it means to be ill and especially to be a hospital patient. They affect decisions about a patient's treatment and who makes the decisions. Cultural differences create problems in communication, rapport, physical examination and treatment compliance and follow through. The special meaning of medicines and diet requires particular attention. The perception of physical pain and psychologic distress varies from culture to culture and affects the attitudes and effectiveness of care-givers as much as of patients. Religious beliefs and attitudes about death, which have many cultural variations, are especially relevant to hospital-based treatment. Linguistic and cultural interpreters can be essential; they are more available than realized, though there are pitfalls in their use. Finally, one must recognize that individual characteristics may outweigh the ethnic and that a good caring relationship can compensate for many cultural missteps.