Copper nanoparticles biosynthesis by Stevia rebaudiana extract: biocompatibility and antimicrobial application.

The growth of material science and technology places a high importance on the creation of better processes for the synthesis of copper nanoparticles. So that, an easy, ecological, and benign process for producing copper nanoparticles (CuNPs) has been developed using candy leaf (Stevia rebaudiana) leaves aqueous extract for the first time. UV-visible spectroscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), high-resolution transmission electron microscope (HR-TEM), Fourier transmission infrared (FTIR), and zeta potential were applied to demonstrate strong characterization for the biosynthesized stevia-CuNPs. The UV-visible absorbance at 575 nm of surface plasmon resonance (SPR) was 1.2. The particle size mean diameter was recorded as 362.3 nm with - 10.8 mV zeta potential. The HR-TEM scanning revealed 51.46-53.17 nm and spherical-shaped stevia-CuNPs surrounded by coat-shell proteins. The cytotoxicity and cytocompatibility activity assay revealed that stevia-CuNPs was safe in lower concentrations and had a significant cell viability reduction in higher concentrations. The produced stevia-CuNPs were applied as antimicrobial agents against eight pathogenic bacteria and five fungi strains. The inhibitory action of the stevia-CuNPs was more pronounced in bacteria than in fungi, and they likewise demonstrated further inhibition zones in Staphylococcus aureus (50.0 mm) than in Aspergillus flavus (55.0 mm). With inhibition zone sizes of 50.0 mm and 47.0 mm and 50 µg/ml minimum inhibitory concentration, S. aureus and A. flavus were the most inhibited pathogens. The minimum lethal effect (MLC) estimate for S. aureus was 50 µg/ml, whereas 75 µg/ml for A. flavus. The stevia-CuNPs mode of action was characterized as bactericidal/fungicidal as the ratio of MIC to MLC was estimated to be equal to or less than 2. After all, stevia-CuNPs could be used as an alternative to commercial antibiotics to solve the problem of multidrug-resistant (MDR) microorganisms.

Optimizing the synthesis of yeast Beta-glucan via response surface methodology for nanotechnology application.

BACKGROUND: The production of biopolymers from waste resources is a growing trend, especially in high-population countries like Egypt. Beta-glucan (ß-glucan) belongs to natural polysaccharides that are derived from plant and microbial origins. In this study, following increasing demands for ß-glucan owing to its bioactive properties, a statistical model to enhance microbial ß-glucan production was evaluated for its usefulness to the food and pharmaceutical industries. In addition, a trial to convert ß-glucan polymer to nanostructure form was done to increase its bioactivity. RESULTS: Ingredients of low-cost media based on agro-industrial wastes were described using Plackett-Burman and central composite design of response surface methodology for optimizing yeast ß-glucan. Minerals and vitamin concentrations significantly influenced ß-glucan yield for Kluyveromyces lactis and nitrogen and phosphate sources for Meyerozyma guilliermondii. The maximum predicted yields of ß-glucan recovered from K. lactis and M. guilliermondii after optimizing the medium ingredients were 407 and 1188 mg/100 ml; respectively. For the first time, yeast ß-glucan nanoparticles (ßGN) were synthesized from the ß-glucan polymer using N-dimethylformamide as a stabilizer and characterized using UV-vis spectroscopy, transmission electron microscope (TEM), dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR). The average size of ßGN was about 300 nm as determined by DLS. The quantitative variation of functional groups between ß-glucan polymer and ßGN was evaluated by FT-IR for explaining the difference in their biological activity against Normal Homo sapiens-Hela contaminant and Hepatic cancer cell lines. CONCLUSIONS: Enriching the low-cost media based on agro-industrial wastes with nutritional ingredients improves the yield of yeast ß-glucan. The present study succeeds to form ß-glucan nanoparticles by a simple method.

New pectin derivatives with antimicrobial and emulsification properties via complexation with metal-terpyridines.

Pectin is widely used in food and pharmaceutical industries. However, due to its polysaccharide nature it lacks antimicrobial activity. In the current work, new pectin derivatives with interesting optical and antimicrobial properties were prepared via supramolecular chemistry utilizing Fe- or Cu-terpyridine (Tpy-Fe and Tpy-Cu) motifs. To proof derivatization of pectin, ultraviolet-visible spectroscopy (UV-Vis) and Fourier Transform infrared (FTIR) were used. In addition, the prepared pectin derivatives retained the known emulsification activity of the non-modified sugar beet pectin as seen from the particle size analysis of oil-in-water emulsions. The prepared derivatives showed antibacterial activity toward selected Gram-positive and Gram-negative bacteria. In addition, cytotoxicity test showed that the Tpy-Fe-pectin derivative was non-toxic to cells of human hepatocarcinoma, breast adenocarcinoma MCF7, and colorectal carcinoma cells at concentrations up to 100 µg/ml, while Tpy-Cu-pectin had moderate toxicity toward the aforementioned cells at the same concentration levels. The prepared derivatives could have potential applications in emulsions with antibacterial activity.

Biosynthesis and Characterization of Extracellular Silver Nanoparticles from Streptomyces aizuneusis: Antimicrobial, Anti Larval, and Anticancer Activities.

The ability of microorganisms to reduce inorganic metals has launched an exciting eco-friendly approach towards developing green nanotechnology. Thus, the synthesis of metal nanoparticles through a biological approach is an important aspect of current nanotechnology. In this study, Streptomyces aizuneusis ATCC 14921 gave the small particle of silver nanoparticles (AgNPs) a size of 38.45 nm, with 1.342 optical density. AgNPs produced by Streptomyces aizuneusis were characterized by means of UV-VIS spectroscopy and transmission electron microscopy (TEM). The UV-Vis spectrum of the aqueous solution containing silver ion showed a peak between 410 to 430. Moreover, the majority of nanoparticles were found to be a spherical shape with variables between 11 to 42 nm, as seen under TEM. The purity of extracted AgNPs was investigated by energy dispersive X-ray analysis (EDXA), and the identification of the possible biomolecules responsible for the reduction of Ag+ ions by the cell filtrate was carried out by Fourier Transform Infrared spectrum (FTIR). High antimicrobial activities were observed by AgNPs at a low concentration of 0.01 ppm, however, no deleterious effect of AgNPs was observed on the development and occurrence of Drosophila melanogaster phenotype. The highest reduction in the viability of the human lung carcinoma and normal cells was attained at 0.2 AgNPs ppm.

Water purification ultrafiltration membranes using nanofibers from unbleached and bleached rice straw.

There has been an increasing interest in recent years in isolating cellulose nanofibers from unbleached cellulose pulps for economic, environmental, and functional reasons. In the current work, cellulose nanofibers isolated from high-lignin unbleached neutral sulfite pulp were compared to those isolated from bleached rice straw pulp in making thin-film ultrafiltration membranes by vacuum filtration on hardened filter paper. The prepared membranes were characterized in terms of their microscopic structure, hydrophilicity, pure water flux, protein fouling, and ability to remove lime nanoparticles and purify papermaking wastewater effluent. Using cellulose nanofibers isolated from unbleached pulp facilitated the formation of a thin-film membrane (with a shorter filtration time for thin-film formation) and resulted in higher water flux than that obtained using nanofibers isolated from bleached fibers, without sacrificing its ability to remove the different pollutants.

Bacterial cellulose/phytochemical's extracts biocomposites for potential active wound dressings.

The present study describes the impregnation of coffee extract (CE) into bacterial cellulose synthesized from kombucha tea fungus (KBC) of different cellulose content, incubated for different incubation periods (2, 4, and 10 days), to prepare biocomposites having the potential for wound healing applications. Total polyphenols in hydroalcoholic extracts from ground roasted coffee and its release from the prepared biocomposites were determined as gallic acid equivalent. The polyphenols content was found to be 13.66 mg/g and the minimum inhibitory concentration (MIC) of the CE was determined using colony-forming unit (CFU) method against Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus where the growth inhibition was 86 and 97% respectively. Biocomposites (KBC/CE) with the lowest cellulose and CE content showed the highest wet tensile stress (3.35 MPa), absorption of pseudo extracellular fluid (154.32% ± 4.84), and water vapor transmission rate (3184.94 ± 198.07 g/m2/day), whereas it showed the lowest polyphenols' release (51.85% ± 2.94)when immersed in PBS buffer of pH 7.4. The impregnation of CE into KBC provided biocomposites that can enlarge the range of BC in the biomedical application.

Influence of TEMPO-oxidized NFC on the mechanical, barrier properties and nisin release of hydroxypropyl methylcellulose bioactive films.

Bioactive films from hydroxypropyl methylcellulose (HPMC), nisin (N), and different percentage (5% to 75%) of TEMPO-oxidized nanofibrillated cellulose (NFC) isolated from rice straw pulp were prepared by solution casting technique and their properties were studied. Scanning electron microscope images (SEM) of films showed homogeneous surface with absence of nanofibers agglomeration. The mechanical and barrier properties were evaluated by measuring their tensile strength, tensile modulus, strain at maximum load, dynamic mechanical thermal properties (DMTA), and water vapor permeability (WVP). In all films, there was an improvement in the mechanical, thermomechanical, and moisture barrier properties as a result of presence of NFC. The molecular structure of the films was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction patterns (XRD). Presence of NFC in HPMC films affected crystallinity of the later. The prepared HPMC/N, NFC/N, and HPMC/N/NFC films exhibited significant antimicrobial activities against Gram-positive bacteria Staphylococcus aureus with noticeable controlled release of nisin in case of films containing HPMC/NFC.

Chitosan nanoparticles/cellulose nanocrystals nanocomposites as a carrier system for the controlled release of repaglinide.

The aim of the present work was to study the use of cellulose nanocrystals (CNC) and chitosan nanoparticles (CHNP) for developing controlled-release drug delivery system of the anti-hyperglycemic drug Repaglinide (RPG). CNC was isolated from palm fruit stalks by sulfuric acid hydrolysis; the dimensions of the isolated nanocrystals were 86-237 nm in length and 5-7 nm in width. Simple and economic method was used for the fabrication of controlled release drug delivery system from CNC and CHNP loaded with RPG drug via ionic gelation of chitosan in the presence of CNC and RPG. The prepared systems showed high drug encapsulation efficiency of about ~98%. Chemical modification of CNC by oxidation to introduce carboxylic groups on their surface (OXCNC) was also carried out for further controlling of RPG release. Particles size analysis showed that the average size of CHNP was about 197 nm while CHNP/CNC/RPG or CHNP/OXCNC/RPG nanoparticles showed average size of 215-310 nm. Compatibility studies by Fourier transform infrared (FTIR) spectroscopy showed no chemical reaction between RPG and the system's components used. By studying the drug release kinetic, all the prepared RPG formulations followed Higuchi model, indicating that the drug released by diffusion through the nanoparticles polymeric matrix.

Development of wheat gluten/nanocellulose/titanium dioxide nanocomposites for active food packaging.

Bionanocomposites were developed by casting/evaporation of wheat gluten (WG), cellulose nanocrystals (CNC), and TiO2 nanoparticles. The effect of addition of different percentages of CNC, and TiO2 on tensile strength (TS), Young's modulus and water sensitivity was studied. A significant improvement in the studied properties is observed when 7.5% CNC and 0.6% TiO2 is added to WG. WG/CNC 7.5%/0.6% TiO2 blend suspension was chosen to coat commercial packaging unbleached kraft paper sheets via 1, 2 and 3 coating layers. A significant enhancement of 56% and 53% in breaking length and burst index, respectively, was achieved for 3 layers coated paper. The antimicrobial activity of the coated papers, against Saccharomyces cervisiae, Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus, was investigated and expressed in terms of reduction % of surviving number (CFU) of the tested organisms. More than 98.5% reduction in CFU was observed against the organisms compared to TiO2-free coated paper.

New supramolecular metallo-terpyridine carboxymethyl cellulose derivatives with antimicrobial properties.

Preparation of a new water-soluble, cellulose derivative via a supramolecular route is presented. In a one-step procedure, carboxymethyl cellulose (CMC) was reacted with the Cu(BF4)2 complex of 4'-chloro[2,2':6',2″]terpyridine to generate the desired CMC-Cu(II)-terpyridine derivative. This polymeric salt was characterized by elemental analysis, ultraviolet-visible spectroscopy (UV-visible), Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), rheological properties measurements, thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), and tensile strength properties testing. In addition, antimicrobial properties were demonstrated against Gram-positive bacteria (Staphylococcus aureus and Streptococcus thermophilus), Gram-negative bacteria (Escherichia coli), and yeast (Saccharomyces cervisiae). The minimum inhibitory concentration of the prepared metallo-terpyridine CMC derivative against the studied microorganisms ranged from 6 to 8 mg/L to achieve ≥90% of microbial growth inhibition.

Semi-scale production of PHAs from waste frying oil by Pseudomonas fluorescens S48.

The present study aimed at developing a strategy to improve the volumetric production of PHAs by Pseudomonas fluorescens S48 using waste frying oil (WFO) as the sole carbon source. For this purpose, several cultivations were set up to steadily improve nutrients supply to attain high cell density and high biopolymer productivity. The production of PHAs was examined in a 14 L bioreactor as one-stage batch, two-stage batch, and high-cell-density fed-batch cultures. The highest value of polymer content in one-stage bioreactor was obtained after 60 h (33.7%). Whereas, the two-stage batch culture increased the polymer content to 50.1% after 54 h. High-cell-density (0.64 g/L) at continuous feeding rate 0.55 mL/l/h of WFO recorded the highest polymer content after 54 h (55.34%). Semi-scale application (10 L working volume) increased the polymer content in one-stage batch, two-stage batch and high cell density fed-batch cultures by about 12.3%, 5.8% and 11.3%, respectively, as compared with that obtained in 2 L fermentation culture. Six different methods for biopolymer extraction were done to investigate their efficiency for optimum polymer recovery. The maximum efficiency of solvent recovery of PHA was attained by chloroform-hypochlorite dispersion extraction. Gas chromatography (GC) analysis of biopolymer produced by Pseudomonas fluorescens S48 indicated that it solely composed of 3-hydrobutyric acid (98.7%). A bioplastic film was prepared from the obtained PHB. The isolate studied shares the same identical sequence, which is nearly the complete 16S rRNA gene. The identity of this sequence to the closest pseudomonads strains is about 98-99%. It was probably closely related to support another meaningful parsiomony analysis and construction of a phylogenetic tree. The isolate is so close to Egyptian strain named EG 639838.

Semi-scale production of PHAs from waste frying oil by Pseudomonas fluorescens S48

The present study aimed at developing a strategy to improve the volumetric production of PHAs by Pseudomonas fluorescens S48 using waste frying oil (WFO) as the sole carbon source. For this purpose, several cultivations were set up to steadily improve nutrients supply to attain high cell density and high biopolymer productivity. The production of PHAs was examined in a 14 L bioreactor as one-stage batch, two-stage batch, and high-cell-density fed-batch cultures. The highest value of polymer content in one-stage bioreactor was obtained after 60 h (33.7%). Whereas, the two-stage batch culture increased the polymer content to 50.1% after 54 h. High-cell-density (0.64 g/L) at continuous feeding rate 0.55 mL/l/h of WFO recorded the highest polymer content after 54 h (55.34%). Semi-scale application (10 L working volume) increased the polymer content in one-stage batch, two-stage batch and high cell density fed-batch cultures by about 12.3%, 5.8% and 11.3%, respectively, as compared with that obtained in 2 L fermentation culture. Six different methods for biopolymer extraction were done to investigate their efficiency for optimum polymer recovery. The maximum efficiency of solvent recovery of PHA was attained by chloroform-hypochlorite dispersion extraction. Gas chromatography (GC) analysis of biopolymer produced by Pseudomonas fluorescens S48 indicated that it solely composed of 3-hydrobutyric acid (98.7%). A bioplastic film was prepared from the obtained PHB. The isolate studied shares the same identical sequence, which is nearly the complete 16S rRNA gene. The identity of this sequence to the closest pseudomonads strains is about 98-99%. It was probably closely related to support another meaningful parsiomony analysis and construction of a phylogenetic tree. The isolate is so close to Egyptian strain named EG 639838.