Phospholipase C from Pseudomonas aeruginosa and Bacillus cereus; characterization of catalytic activity.

OBJECTIVE: To study characteristics of phospholipases C (PLCs), their importance for producing microorganisms as well as the potential of their use for industrial purposes. METHOD: PLC from Bacillus cereus (B. cereus) D101 was selected as an example of Gram-positive PLCs and PLC from Pseudomonas aeruginosa (P. aeruginosa) D183 of Gram-negative ones. Enzymes were partially purified by ammonium sulfate precipitation followed by membrane dialysis. Partially purified preparations were used to study effect of different factors on activities as well as in substrate specificity tests which were conducted using a turbidimetric assay method. RESULTS: Maximum activity was at pH 7 and 8 and 40 °C for P. aeruginosa PLC, and pH 8-10 and 37 °C for B. cereus PLC. Both PLCs were inhibited by Pi at 5 mM or higher, whereas, PLC from B. cereus only was inhibited by EDTA. Activity of P. aeruginosa PLC was not affected by removing Zn(2+) ions from reaction mixture or their replacement with Ca(2+), Ba(2+), Mg(2+) or Mn(2+) ions. Vis-à-vis, activity of B. cereus PLC was found to be metal ion dependent. PLCs from both isolates were relatively thermostable and showed maximum affinity toward phosphatidylcholine. Sphingomyelin and phosphatidylethanolamine were not good substrates and phosphatidylinositol, phosphatidylserine, phosphatidylglycerol and cardiolipin could be considered non-substrates. CONCLUSION: Human body physiological conditions could favor activity of P. aeruginosa and B. cereus PLCs. These enzymes may participate in phosphate scavenging and virulence of producing isolates but not in autolysis. PLCs from both isolates are potential candidates for industrial use.

Characterization and complete sequence of lactonase enzyme from Bacillus weihenstephanensis isolate P65 with potential activity against acyl homoserine lactone signal molecules.

Acyl homoserine lactones (AHLs) are the most common class of quorum sensing signal molecules (autoinducers) that have been reported to be essential for virulence of many relevant pathogenic bacteria such as Pseudomonas aeruginosa. New approach for controlling infections of such bacteria is through quorum quenching. In this study, the acyl homoserine lactone inhibitory activity of the crude enzyme from a Bacillus weihenstephanensis-isolate P65 was characterized. The crude enzyme was found to have relatively high thermal stability and was stable in pH range 6 to 9. The crude enzyme extract was found to have lactonase activity of 36.3 U/mg total protein. Maximum enzyme activity was achieved within a range of 28-50°C and pH 6-9. None of the metals used enhanced the activity neither did EDTA inhibit it. However, a concentration of 10 mM Fe(+2) reduced the activity to 73.8%. Catalytic activity and kinetic constants were determined using hexanoyl homoserine lactone as a substrate. Studying enzyme substrate specificity using synthetic standard signals displayed broad spectrum of activity. The enzyme was found to be constitutive. Isolation and complete nucleotide sequence of the respective lactonase gene were done and submitted to the Genbank database under accession code KC823046.

Characterization of rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20.

Rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20 is viscous sticky oily yellowish brown liquid with a fruity odor. It showed solubility at aqueous pH > 4 with optimum solubility at pH 7-7.5 and freely soluble in ethyl acetate. This biosurfactant has a very high surface activity as it could lower the surface tension of water to 30 mN/m at about 13.4 mg/L, and it exhibited excellent stabilities at high temperatures (heating at 100 degrees C for 1 h and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and pH values (up to pH 13). The produced biosurfactant can be used in the crude form either as cell-free or cell-containing culture broth of the grown bacteria, since both preparations showed high emulsification indices ranged between 59% and 66% against kerosene, diesel, and motor oil. These characters make the test rhamnolipid a potential candidate for use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. High-performance thin-layer chromatography densitometry revealed that the extracted rhamnolipid contained the two most active rhamnolipid homologues dirhamno dilipidic rhamnolipid and monorhamno dilipidic rhamnolipid at 44% and 56%, respectively, as compared to 51% and 29.5%, respectively, in a standard rhamnolipid preparation. The nature and ratio of these two rhamnolipid homologues showed to be strain dependent rather than medium-component dependent.

Optimization of surfactin production by Bacillus subtilis isolate BS5.

Bacillus subtilis BS5 is a soil isolate that produces promising yield of surfactin biosurfactant in mineral salts medium (MSM). It was found that cellular growth and surfactin production in MSM were greatly affected by the environmental fermentation conditions and the medium components (carbon and nitrogen sources and minerals). Optimum environmental conditions for high surfactin production on the shake flask level were found to be a slightly acidic initial pH (6.5-6.8), an incubation temperature of 30 degrees C, a 90% volumetric aeration percentage, and an inoculum size of 2% v/v. For media components, it was found that the optimum carbon source was molasses (160 ml/l), whereas the optimum nitrogen source was NaNO(3) (5 g/l) and the optimum trace elements were ZnSO(4).7H(2)O (0.16 g/l), FeCl(3).6H(2)O (0.27 g/l), and MnSO(4).H(2)O (0.017 g/l). A modified MSM (molasses MSM), combining the optimum medium components, was formulated and resulted in threefold increase in surfactin productivity that reached 1.12 g/l. No plasmid could be detected in the tested isolate, revealing that biosurfactant production by B. subtilis isolate BS5 is chromosomally mediated but not plasmid-mediated.

Characterization of surfactin produced by Bacillus subtilis isolate BS5.

Physical and chromatographic characterization of the surfactin biosurfactant produced by Bacillus subtilis isolate BS5 has been conducted to study its potentiality for industrial application. The crude extract of test surfactin appeared as off-white to buff flake-like amorphous residue with bad odor similar to sour pomegranate. Test surfactin showed solubility in aqueous solution at pH>5 with optimum solubility at pH 8-8.5. It was also soluble in organic solvents like ethanol, acetone, methanol, butanol, chloroform, and dichloromethane. Surfactin crystals appeared rectangular with blunt corners and were arranged perpendicular to each other making a plus sign. Extracted surfactin showed high surface activity, as it could lower the surface tension of water from about 70 to 36 mN/m at approximately 15.6 mg/l. Moreover, test surfactin exhibited excellent stabilities at high temperatures (100 degrees C for up to 1 h at and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and over a wide range of pH (5-13). Test surfactin in the cell-free supernatant or crude culture broth forms showed high emulsification indices against kerosene (62.5% and 59%, respectively), diesel (62.5% and 66%, respectively), and motor oil (62% and 66%, respectively). These characters can effectively make test surfactin, in its crude forms, a potential candidate for the use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. Chromatographic characterization of test surfactin, using high-performance liquid chromatography technique, revealed that the extracted surfactin contained numerous isoforms, of which six were found in the standard surfactin preparation (Fluka). Additional peaks appeared in the test surfactin and not in the standard one. These peaks may correspond to new surfactin isoforms that may be present in the test surfactin produced by B. subtilis isolate BS5.