RESUMO
Large quantities of high-purity NH4CrF3 have been synthesized using a wet-chemical method, and its structural chemistry and magnetic properties are investigated in detail for the first time. NH4CrF3 is a tetragonal fluoroperovskite that displays an ordering of the ammonium (NH4+) groups at room temperature and C-type orbital ordering. The ammonium groups order and display distinct signs of hydrogen bonds to nearby fluoride anions by buckling the Cr-F-Cr angle away from 180°. The ammonium ordering remains up to 405 K, much higher than in other ammonium fluoroperovskites, indicating a correlation between the flexibility of the Jahn-Teller ion, the hydrogen bond formation, and the ammonium ordering. At 405 K, an order-to-disorder transition occurs, where the ammonium groups disorder, corresponding to a transition to higher symmetry. This is accompanied by a contraction of the unit cell from breaking hydrogen bonds, similar to the phenomenon observed in water ice melting. The compound orders antiferromagnetically with a Neél temperature of 60 K, an effective paramagnetic moment of 4.3 µB, and a Weiss temperature of -33 K. An A-type antiferromagnetic structure is identified by neutron diffraction, with an ordered moment of 3.72(2) µB.
RESUMO
Metal hydroborates are versatile materials with interesting properties related to energy storage and cation conductivity. The hydrides containing B3H8- (triborane, or octahydrotriborate) ions have been at the center of attention for some time as reversible intermediates in the decomposition of BH4- (3BH4-â B3H8- + 2H2), and as conducting media in electrolytes based on boron-hydride cage clusters. We report here the first observation of two phase transitions in CsB3H8 prior to its decomposition above 230 °C. The previously reported orthorhombic room temperature phase (here named α-CsB3H8) with the space group Ama2 changes into a new phase with the space group Pnma at 73 °C (here named ß-CsB3H8), and then into a face-centered cubic phase, here named γ-CsB3H8, at 88 °C. These phases are not stable at room temperature thus requiring in situ measurements for their characterization. The phase transitions and decomposition pathway of CsB3H8 were studied with in situ synchrotron powder X-ray diffraction (SR-PXD), in situ and ex situ vibrational spectroscopies (Raman and FTIR), and differential-scanning calorimetry combined with thermo-gravimetric analysis (DSC-TGA). The structure determination was validated by vibrational spectroscopy analysis and modeling of the periodic structures by density functional methods. In γ-CsB3H8, a significant disorder in B3H8- positions and orientations was found which can potentially benefit cation conducting properties through the paddle mechanism.
RESUMO
A number of high-entropy alloys (HEAs) in the TiVZrNbHf system have been synthesized by arc melting and systematically evaluated for their hydrogen sorption characteristics. A total of 21 alloys with varying elemental compositions were investigated, and 17 of them form body-centered-cubic (bcc) solid solutions in the as-cast state. A total of 15 alloys form either face-centered-cubic (fcc) or body-centered-tetragonal (bct) hydrides after exposure to gaseous hydrogen with hydrogen per metal ratios (H/M) as high as 2.0. Linear trends are observed between the volumetric expansion per metal atom [(V/Z)fcc/bct - (V/Z)bcc/hcp]/(V/Z)bcc/hcp with the valence electron concentration and average Pauling electronegativity (χp) of the alloys. However, no correlation was observed between the atomic size mismatch, δ, and any investigated hydrogen sorption property such as the maximum storage capacity or onset temperature for hydrogen release.
RESUMO
Rechargeable solid-state magnesium batteries are considered for high energy density storage and usage in mobile applications as well as to store energy from intermittent energy sources, triggering intense research for suitable electrode and electrolyte materials. Recently, magnesium borohydride, Mg(BH4)2, was found to be an effective precursor for solid-state Mg-ion conductors. During the mechanochemical synthesis of these Mg-ion conductors, amorphous Mg(BH4)2 is typically formed and it was postulated that this amorphous phase promotes the conductivity. Here, electrochemical impedance spectroscopy of as-received γ-Mg(BH4)2 and ball milled, amorphous Mg(BH4)2 confirmed that the conductivity of the latter is ~2 orders of magnitude higher than in as-received γ-Mg(BH4)2 at 353 K. Pair distribution function (PDF) analysis of the local structure shows striking similarities up to a length scale of 5.1 Å, suggesting similar conduction pathways in both the crystalline and amorphous sample. Up to 12.27 Å the PDF indicates that a 3D net of interpenetrating channels might still be present in the amorphous phase although less ordered compared to the as-received γ-phase. However, quasi elastic neutron scattering experiments (QENS) were used to study the rotational mobility of the [BH4] units, revealing a much larger fraction of activated [BH4] rotations in amorphous Mg(BH4)2. These findings suggest that the conduction process in amorphous Mg(BH4)2 is supported by stronger rotational mobility, which is proposed to be the so-called "paddle-wheel" mechanism.
RESUMO
The formation, structure and deuterium desorption properties of Mg2FexCo(1-x)Dy (0 ≤ x ≤ 1 and 5 ≤ y ≤ 6) complex hydrides were investigated. The synthesis was carried out by reactive ball milling, using a mixture of powders of the parent elements in D2 atmosphere. The formation of quaternary deuterides was identified from Rietveld refinements of powder X-Ray diffraction and powder neutron diffraction patterns, and from infrared attenuated total reflectance analysis. It was observed that the crystal structure of deuterides depends on the transition metal fraction. For Co-rich compositions, i.e. up to x = 0.1, hydrides have the tetragonal distorted CaF2-type structure (space group P4/nmm) of Mg2CoD5 at room temperature. For Fe-rich compositions, i.e. x ≥ 0.5, a cubic hydride is observed, with the same K2PtCl6-type structure (space group Fm[Formula: see text]m) as Mg2FeD6 and as Mg2CoD5 at high temperatures. For x = 0.3, both the cubic and the tetragonal deuterides are detected. Differential scanning calorimetry coupled with thermogravimetric and temperature programmed desorption analyses show rather similar deuterium desorption properties for all samples, without significant changes as a function of composition. Finally, hydrogen sorption experiments performed for Mg2Fe0.5Co0.5H5.5 at 30 bar of H2 and 673 K showed reversible reactions, with good kinetic for both absorption and desorption of hydrogen.
RESUMO
The properties of the mixed system LiBH4-LiCl-P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 60 °C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is â¼10-3 S cm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. Structural analysis and characterization of the material suggest that BH4 groups and PS4 may belong to the same molecular structure, where Cl ions interplay to accommodate the structural unit. Thanks to its conductivity, ductility and electrochemical stability (up to 5 V, Au vs. Li+/Li), this new electrolyte is successfully tested in battery cells operated with a cathode material (layered TiS2, theo. capacity 239 mA h g-1) and Li anode resulting in 93% capacity retention (10 cycles) and notable cycling stability under the current density â¼12 mA g-1 (0.05C-rate) at 50 °C. Further advanced characterisation by means of operando synchrotron X-ray diffraction in transmission mode contributes explicitly to a better understanding of the (de)lithiation processes of solid-state battery electrodes operated at moderate temperatures.
RESUMO
In order to improve the suitability of NaBH4 as a clean fuel, its decomposition temperature needs to be decreased to below 535 °C, while its hydrogen release must be as high as possible. In this work, the influence of a collection of first and second period transition metal fluorides on the destabilization of NaBH4 is studied on samples produced by ball milling NaBH4 with 2 mol% of a metal fluoride additive. The effects obtained by increasing additive amount and changing oxidation state are also evaluated for NbF5, CeF3, and CeF4. The as-milled products are characterized by in-house power X-ray diffraction, while the hydrogen release and decomposition are monitored by temperature programmed desorption with residual gas analysis, differential scanning calorimetry, and thermogravimetry. The screening of samples containing 2 mol% of additive shows that distinctive groups of transition metal fluorides affect the ball milling process differently depending on their enthalpy of formation, melting point, or their ability to react at the temperatures achieved during ball milling. This leads to the formation of NaBF4 in the case of TiF4, MnF3, VF4, CdF2, NbF5, AgF, and CeF3 and the presence of the metal in CrF3, CuF2, and AgF. There is no linear correlation between the position of the transition metal in the periodic table and the observed behavior. The thermal behavior of the products after milling is given by the remaining NaBH4, fluoride, and the formation of intermediate metastable compounds. A noticeable decrease of the decomposition temperature is seen for the majority of the products, with the exceptions of the samples containing YF3, AgF, and CeF3. The largest decrease of the decomposition temperature is observed for NbF5. When comparing increasing amounts of the same additive, the largest decrease of the decomposition temperature is observed for 10 mol% of NbF5. Higher amounts of additive result in the loss of the NaBH4 thermal signal and ultimately the loss of the crystalline borohydride. When comparing additives with the same transition metal and different oxidation states, the most efficient additive is found to be the one with a higher oxidation state. Furthermore, among all the samples studied, higher oxidation state metal fluorides are found to be the most destabilizing agents for NaBH4. Overall, the present study shows that there is no single parameter affecting the destabilization of NaBH4 by transition metal fluorides. Instead, parameters such as the transition metal electronegativity and oxidation state or the enthalpy of formation of the fluoride and its melting point are competing to influence the destabilization. In particular, it is found that the combination of a high metal oxidation state and a low fluoride melting point will enhance destabilization. This is observed for MnF3, NbF5, NiF2, and CuF2, which lead to high gas releases from the decomposition of NaBH4 at the lowest decomposition temperatures.
Assuntos
Boroidretos/química , Fluoretos/química , Hidrogênio/química , Energia Renovável , Humanos , Metais/químicaRESUMO
This paper is a collection of selected contributions of the 1st International Workshop on Mechanochemistry of Metal Hydrides that was held in Oslo in May 2018. In this paper, the recent developments in the use of mechanochemistry to synthesize and modify metal hydrides are reviewed. A special emphasis is made on new techniques beside the traditional way of ball milling. High energy milling, ball milling under hydrogen reactive gas, cryomilling and severe plastic deformation techniques such as High-Pressure Torsion (HPT), Surface Mechanical Attrition Treatment (SMAT) and cold rolling are discussed. The new characterization method of in-situ X-ray diffraction during milling is described.
RESUMO
In this work, praseodymium(iii) borohydride, Pr(BH4)3, and an isotopically enriched analogue, Pr(11BD4)3, are prepared by a new route via a solvate complex, Pr(11BD4)3S(CH3)2. Nd(BH4)3 was synthesized using the same method and the structures, polymorphic transformations, and thermal stabilities of these compounds are investigated in detail. α-Pr(BH4)3 and α-Nd(BH4)3 are isostructural with cubic unit cells (Pa3[combining macron]) stable at room temperature (RT) and a unit cell volume per formula unit (V/Z) of 180.1 and 175.8 Å3, respectively. Heating α-Pr(BH4)3 to T â¼ 190 °C, p(Ar) = 1 bar, introduces a transition to a rhombohedral polymorph, r-Pr(BH4)3 (R3[combining macron]c) with a smaller unit cell volume and a denser structure, V/Z = 156.06 Å3. A similar transition was not observed for Nd(BH4)3. However, heat treatment of α-Pr(BH4)3, at T â¼ 190 °C, p(H2) = 40 bar and α-Nd(BH4)3, at T â¼ 270 °C, p(H2) = 98 bar facilitates reversible formation of another three cubic polymorph, denoted as ß, ß' and ß''-RE(BH4)3 (Fm3[combining macron]c). Moreover, the transition ß- to ß'- to ß''- is considered a rare example of stepwise negative thermal expansion. For Pr(BH4)3, â¼2/3 of the sample takes this route of transformation whereas in argon only â¼5 wt%, and the remaining transforms directly from α- to r-Pr(BH4)3. The ß-polymorphs are porous with V/Z = 172.4 and 172.7 Å3 for ß''-RE(BH4)3, RE = Pr or Nd, respectively, and are stabilized by the elevated hydrogen pressures. The polymorphic transitions occur due to rotation of RE(BH4)6 octahedra without breaking or forming chemical bonds. Structural DFT optimization reveals the decreasing stability of α-Pr(BH4)3 > ß-Pr(BH4)3 > r-Pr(BH4)3.
RESUMO
The crystal structure of a mixed amide-imide phase, RbMgND2ND, has been solved in the orthorhombic space group Pnma ( a = 9.55256(31), b = 3.70772(11) and c = 10.08308(32) Å). A new metal amide-hydride solid solution, Rb(NH2) xH(1- x), has been isolated and characterized in the entire compositional range. The profound analogies, as well as the subtle differences, with the crystal chemistry of KMgND2ND and K(NH2) xH1- x are thoroughly discussed. This approach suggests that the comparable performances obtained using K- and Rb-based additives for the Mg(NH2)2- 2LiH and 2LiN H2-MgH2 hydrogen storage systems are likely to depend on the structural similarities of possible reaction products and intermediates.
RESUMO
Several studies have demonstrated that MgH2 is a promising conversion-type anode toward Li. A major obstacle is the reversible capacity during cycling. Electrochemical co-existence of a mixed metal hydride-oxide conversion type anode is demonstrated for lithium ion batteries using a solid-state electrolyte. 75MgH2·25CoO anodes are obtained from optimized mixing conditions avoiding reactions occurring during high-energy ball-milling. Electrochemical tests are carried out to investigate the cycling capability and reversibility of the on-going conversion reactions. The cycling led to formation of a single-plateau nanocomposite electrode with higher reversibility yield, lowered discharge-charge hysteresis and mitigated kinetic effect at high C-rate compared to MgH2 anodes. It is believed that reduced diffusion pathways and less polarized electrodes are the origin of the improved properties. The designed composite-electrode shows good preservation and suitability with LiBH4 solid electrolyte as revealed from electron microscopy analyses and X-ray photoelectron spectroscopy.
RESUMO
Magnesium borohydride (Mg(BH4)2) is a promising material for solid state hydrogen storage. However, the predicted reversible hydrogen sorption properties at moderate temperatures have not been reached due to sluggish hydrogen sorption kinetics. Hydrogen (H) â deuterium (D) exchange experiments can contribute to the understanding of the stability of the BH4 - anion. Pure γ-Mg(BH4)2, ball milled Mg(BH4)2 and composites with the additives nickel triboride (Ni3B) and diniobium pentaoxide (Nb2O5) have been investigated. In situ Raman analysis demonstrated that in pure γ-Mg(BH4)2 the isotopic exchange reaction during continuous heating started at â¼80 °C, while the ball milled sample did not show any exchange at 3 bar D2. However, during ex situ exchange reactions investigated by infrared (IR) and thermogravimetric (TG) analyses a comparable H â D exchange during long exposures (23 h) to deuterium atmosphere was observed for as received, ball milled and γ-Mg(BH4)2 + Nb2O5, while the Ni3B additive hindered isotopic exchange. The specific surface areas (SSA) were shown to be very different for as received γ-Mg(BH4)2, BET area = 900 m2 g-1, and ball milled Mg(BH4)2, BET area = 30 m2 g-1, respectively, and this explains why no gas-solid H(D) diffusion was observed for the ball milled (amorphous) Mg(BH4)2 during the short time frames of in situ Raman measurements. The heat treated ball milled sample partially regained the porous γ-Mg(BH4)2 structure (BET area = 560 m2 g-1). This in combination with the long reaction times allowing for the reaction to approach equilibrium explains the observed gas-solid H(D) diffusion during long exposure. We have also demonstrated that a small amount of D can be substituted in both high surface area and low surface area samples at room temperature proving that the B-H bonds in Mg(BH4)2 can be challenged at these mild conditions.
RESUMO
Thermoelectric application of half-Heusler compounds suffers from their fairly high thermal conductivities. Insight into how effective various scattering mechanisms are in reducing the thermal conductivity of fabricated XNiSn compounds (X = Hf, Zr, Ti, and mixtures thereof) is therefore crucial. Here, we show that such insight can be obtained through a concerted theory-experiment comparison of how the lattice thermal conductivity κ Lat(T) depends on temperature and crystallite size. Comparing theory and experiment for a range of Hf0.5Zr0.5NiSn and ZrNiSn samples reported in the literature and in the present paper revealed that grain boundary scattering plays the most important role in bringing down κ Lat, in particular so for unmixed compounds. Our concerted analysis approach was corroborated by a good qualitative agreement between the measured and calculated κ Lat of polycrystalline samples, where the experimental average crystallite size was used as an input parameter for the calculations. The calculations were based on the Boltzmann transport equation and ab initio density functional theory. Our analysis explains the significant variation of reported κ Lat of nominally identical XNiSn samples, and is expected to provide valuable insights into the dominant scattering mechanisms even for other materials.
RESUMO
Two new bimetallic sodium or potassium lanthanum borohydrides, NaLa(BH4)4 and K3La(BH4)6, are formed using La(BH4)3 free of metal halide by-products. NaLa(BH4)4 crystallizes in an orthorhombic crystal system with unit cell parameters, a = 6.7987(19), b = 17.311(5), c = 7.2653(19) Å and space group symmetry Pbcn. This compound has a new structure type built from brucite-like layers of octahedra (hcp packing of anions) with half of the octahedral sites empty leading to octahedral chains similar to rutile (straight chains) or α-PbO2 (zig-zag chains). K3La(BH4)6 crystallizes in the monoclinic crystal system with unit cell parameters a = 7.938(2), b = 8.352(2), c = 11.571(3) Å, ß = 90.19(6)° and space group P21/n with a double-perovskite type structure. Thermogravimetric analysis shows a mass loss of 5.86 and 2.83 wt% for NaLa(BH4)4 and K3La(BH4)6, respectively, in the temperature range of room temperature to 400 °C. Mass spectrometry shows that hydrogen release starts at 212 and 275 °C for NaLa(BH4)4 and K3La(BH4)6, respectively and confirms that no diborane is released. Sieverts' measurements reveal that 2.03 and 0.49 wt% of hydrogen can be released from the NaLa(BH4)4 and K3La(BH4)6, respectively, during the second hydrogen desorption cycle at the selected physical condition for hydrogen absorption.
RESUMO
We report for the first time the formation of a metal amide-hydride solid solution. The dissolution of KH into KNH2 leads to an anionic substitution, which decreases the interaction among NH2- ions. The rotational properties of the high temperature polymorphs of KNH2 are thereby retained down to room temperature.
RESUMO
Rare earth (RE) metal borohydrides are receiving immense consideration as possible hydrogen storage materials and solid-state Li-ion conductors. In this study, halide free Er(BH4)3 and Pr(BH4)3 have been successfully synthesized for the first time by the combination of mechanochemical milling and/or wet chemistry. Rietveld refinement of Er(BH4)3 confirmed the formation of two different Er(BH4)3 polymorphs: α-Er(BH4)3 with space group Pa3[combining macron], a = 10.76796(5) Å, and ß-Er(BH4)3 in Pm3[combining macron]m with a = 5.4664(1) Å. A variety of Pr(BH4)3 phases were found after extraction with diethyl ether: α-Pr(BH4)3 in Pa3[combining macron] with a = 11.2465(1) Å, ß-Pr(BH4)3 in Pm3[combining macron]m with a = 5.716(2) Å and LiPr(BH4)3Cl in I4[combining macron]3m, a = 11.5468(3) Å. Almost phase pure α-Pr(BH4)3 in Pa3[combining macron] with a = 11.2473(2) Å was also synthesized. The thermal decomposition of Er(BH4)3 and Pr(BH4)3 proceeded without the formation of crystalline products. Rehydrogenation, as such, was not successful. However, addition of LiH promoted the rehydrogenation of RE hydride phases and LiBH4 from the decomposed RE(BH4)3 samples.
RESUMO
Crystal structure determination is essential for characterizing materials and their properties, and can be facilitated by various tools and indicators. For instance, the Goldschmidt tolerance factor (T) for perovskite compounds is acknowledged for evaluating crystal structures in terms of the ionic packing. However, its applicability is limited to perovskite compounds. Here, we report on extending the applicability of T to ionic compounds with arbitrary ionic arrangements and compositions. By focussing on the occupancy of constituent spherical ions in the crystal structure, we define the ionic filling fraction (IFF), which is obtained from the volumes of crystal structure and constituent ions. Ionic compounds, including perovskites, are arranged linearly by the IFF, providing consistent results with T. The linearity guides towards finding suitable unit cell and composition, thus tackling the main obstacle for determining new crystal structures. We demonstrate the utility of the IFF by solving the structure of three hydrides with new crystal structures.
RESUMO
Magnesium borohydride (Mg(BH4)2) is one of the most promising complex hydrides presently studied for energy-related applications. Many of its properties depend on the stability of the BH4(-) anion. The BH4(-) stability was investigated with respect to HâD exchange. Inâ situ Raman measurements on high-surface-area porous Mg(BH4 )2 in 0.3â MPa D2 have shown that the isotopic exchange at appreciable rates occurs already at 373â K. This is the lowest exchange temperature observed in stable borohydrides. Gas-solid isotopic exchange follows the BH4(-) +DË âBH3D(-) +HË mechanism at least at the initial reaction steps. Exâ situ deuteration of porous Mg(BH4)2 and its dense-phase polymorph indicates that the intrinsic porosity of the hydride is the key behind the high isotopic exchange rates. It implies that the solid-state H(D) diffusion is considerably slower than the gas-solid HâD exchange reaction at the surface and it is a rate-limiting steps for hydrogen desorption and absorption in Mg(BH4)2.
RESUMO
The effect of transition metal fluorides on the decomposition of NaBH4 has been investigated for NaBH4 ball milled with TiF3, MnF3 or FeF3. The compounds were examined by thermal programmed desorption with residual gas analysis, thermo gravimetric analysis and volumetric measurements using a Sieverts-type apparatus. The phase formation process during thermal decomposition was studied by in situ synchrotron radiation powder X-ray diffraction on the as-milled powders. NaBF4 was among the products in all mechano-chemical reactions. (11)B-NMR spectra analysis gave NaBF4 : NaBH4 ratios of 1 : 150 for Na-Ti, 1 : 40 for Na-Mn, and 1 : 10 for Na-Fe. Pure NaBH4 possessed a hydrogen release onset temperature of 430 °C. The hydrogen release in the NaBH4-MnF3 system began as low as 130 °C. FeF3 decreased the onset temperature to 161 °C and TiF3 to 200 °C. TiF3 reacted completely with NaBH4 below 320 °C. All the examined systems have negligible emissions of diborane species. H-sorption studies performed at selected temperatures above 300 °C exhibited relatively fast desorption kinetics. Partial hydrogen re-absorption was observed for the Na-Mn and Na-Fe samples.
RESUMO
Mechanochemical reactions between KBH4 and KBF4 result in the formation of potassium fluoroborohydrides K(BH(x)F(4-x)) (x = 0-4), as determined by (11)B and (19)F solid state NMR. The materials maintain the cubic KBH4 structure. Thermogravimetric (TG) data for a ball-milled sample with KBH4 : KBF4 = 3 : 1 are consistent with only desorption of hydrogen.