Bis(Triphenylamine)Benzodifuran Chromophores: Synthesis, Electronic Properties and Application in Organic Light-Emitting Diodes.

A series of bis(triphenylamine)benzodifuran chromophores have been synthesized and fully characterised. Starting from suitably functionalized benzodifuran (BDF) precursors, two triphenylamine (TPA) moieties are symmetrically coupled to a central BDF unit either at 4,8-positions through double bonds (1) and single bonds (2) respectively, or at 2,6-positions through double bonds (3). Their electronic absorption and photoluminescence properties as well as redox behaviour have been investigated in detail, indicating that the π-extended conjugation via vinyl linkers in 1 and 3 leads to comparatively strong electronic interactions between the relevant redox moieties TPA and BDF. Due to intriguing electronic properties and structural planarity, 3a has been applied as a dopant emitter in organic light-emitting diodes. A yellowish-green OLED exhibits a high external quantum efficiency (EQE) of 6.2%, thus exceeding the theoretical upper limit most likely due to energy transfer from an interface exciplex to an emissive layer and/or favorable horizontal orientation.

Optically Controlled Electron Transfer in a ReI Complex.

Ultrafast optical control of intramolecular charge flow was demonstrated, which paves the way for photocurrent modulation and switching with a highly wavelength-selective ON/OFF ratio. The system that was explored is a fac-[Re(CO)3 (TTF-DPPZ)Cl] complex, where TTF-DPPZ=4',5'-bis(propylthio)tetrathiafulvenyl[i]dipyrido[3,2-a:2',3'-c]phenazine. DFT calculations and AC-Stark spectroscopy confirmed the presence of two distinct optically active charge-transfer processes, namely a metal-to-ligand charge transfer (MLCT) and an intra-ligand charge transfer (ILCT). Ultrafast transient absorption measurements showed that the ILCT state decays in the ps regime. Upon excitation to the MLCT state, only a long-lived 3 MLCT state was observed after 80 ps. Remarkably, however, the bleaching of the ILCT absorption band remained as a result of the effective inhibition of the HOMO-LUMO transition.

Crystal structure of 2,4,6-tris-(cyclo-hex-yloxy)-1,3,5-triazine.

The title compound, C21H33N3O3, is a tri-substituted cyclo-hex-yloxy triazine. In the crystal, the triazine rings form (C3i-PU) Piedfort units. The inter-centroid distance of the π-π inter-action involving the triazine rings is 3.3914 (10) Å. In the crystal, mol-ecules are linked by C-H⋯O hydrogen bonds, forming ribbons propagating along [1-10]. There are also weak C-H⋯N and C-H⋯O contacts present, linking inversion-related ribbons, forming a three-dimensional structure.

Correction: Coordination-directed self-assembly of a simple benzothiadiazole-fused tetrathiafulvalene to low-bandgap metallogels.

Correction for 'Coordination-directed self-assembly of a simple benzothiadiazole-fused tetrathiafulvalene to low-bandgap metallogels' by Anneliese M. Amacher et al., Chem. Commun., 2015, 51, 15063-15066.

Coordination-directed self-assembly of a simple benzothiadiazole-fused tetrathiafulvalene to low-bandgap metallogels.

Coordination-driven gelation of a benzothiadiazole-fused tetrathiafulvalene (TTF) is demonstrated. This is the first work reporting highly stable metallogels based on a donor-acceptor conjugate with such a simple structure for the construction of new low-bandgap materials with various functional properties and novel nanostructures.

Synthesis and Structural Elucidation of Triazolylmolybdenum(VI) Oxide Hybrids and Their Behavior as Oxidation Catalysts.

A large family of bifunctional 1,2,4-triazole molecular tectons (tr) has been explored for engineering molybdenum(VI) oxide hybrid solids. Specifically, tr ligands bearing auxiliary basic or acidic groups were of the type amine, pyrazole, 1H-tetrazole, and 1,2,4-triazole. The organically templated molybdenum(VI) oxide solids with the general compositions [MoO3(tr)], [Mo2O6(tr)], and [Mo2O6(tr)(H2O)2] were prepared under mild hydrothermal conditions or by refluxing in water. Their crystal structures consist of zigzag chains, ribbons, or helixes of alternating cis-{MoO4N2} or {MoO5N} polyhedra stapled by short [N-N]-tr bridges that for bitriazole ligands convert the motifs into 2D or 3D frameworks. The high thermal (235-350 °C) and chemical stability observed for the materials makes them promising for catalytic applications. The molybdenum(VI) oxide hybrids were successfully explored as versatile oxidation catalysts with tert-butyl hydroperoxide (TBHP) or aqueous H2O2 as an oxygen source, at 70 °C. Catalytic performances were influenced by the different acidic-basic properties and steric hindrances of coordinating organic ligands as well as the structural dimensionality of the hybrid.

Searching the Hearts of Graphene-like Molecules for Simplicity, Sensitivity, and Logic.

If quantum interference patterns in the hearts of polycyclic aromatic hydrocarbons could be isolated and manipulated, then a significant step toward realizing the potential of single-molecule electronics would be achieved. Here we demonstrate experimentally and theoretically that a simple, parameter-free, analytic theory of interference patterns evaluated at the mid-point of the HOMO-LUMO gap (referred to as M-functions) correctly predicts conductance ratios of molecules with pyrene, naphthalene, anthracene, anthanthrene, or azulene hearts. M-functions provide new design strategies for identifying molecules with phase-coherent logic functions and enhancing the sensitivity of molecular-scale interferometers.

Exploring the electronic structure of an organic semiconductor based on a compactly fused electron donor-acceptor molecule.

A Mott-type semiconductor based on a compactly fused and partially oxidized electron donor-acceptor (D-A) molecule was recently prepared and identified to exhibit a large room-temperature conductivity of 2 S cm(-1) . In a marked contrast to the organic conductors characterized by relatively well decoupled and segregated uniform stacks of D and A moieties, the formally half-oxidized tetrathiafulvalene donors of the actual compound are organized in columnar π stacks only, whereby the coplanar electron-acceptor units, namely benzothiadiazole, are closely annulated along their ridges. Herein, we present a theoretical study that explores the electronic structure of this novel type of organic semiconductor. The highly symmetric-solid state material behaves as a one-dimensional electronic system with strong antiferromagnetic interactions (coupling constant>200 cm(-1) ). The unique shape and local dipole of this redox-active fused electron D-A molecule lays the basis for further investigations of the collective electronic structure, mainly in the function of different counterions embedded in the crystalline lattice.

Crystal structures of isotypic poly[bis-(benz-imid-azolium) [tetra-µ-iodido-stannate(II)]] and poly[bis-(5,6-di-fluoro-benzimidazolium) [tetra-µ-iodido-stannate(II)]].

The isostructural title compounds, {(C7H7N2)2[SnI4]} n , (1), and {(C7H5F2N2)2[SnI4]} n , (2), show a layered perovskite-type structure composed of anionic {[SnI4](2-)} n sheets parallel to (100), which are decorated on both sides with templating benzimidazolium or 5,6-di-fluoro-benzimidazolium cations, respectively. These planar organic heterocycles mainly form N-H⋯I hydrogen bonds to the terminal I atoms of the corner-sharing [SnI6] octa-hedra (point group symmetry 2) from the inorganic layer, but not to the bridging ones. This is in contrast to most of the reported structures of related compounds where ammonium cations are involved. Here hydrogen bonding to both types of iodine atoms and thereby a distortion of the inorganic layers to various extents is observed. For (1) and (2), all Sn-I-Sn angles are linear and no out-of-plane distortions of the inorganic layers occur, a fact of relevance in view of the material properties. The arrangement of the aromatic cations is mainly determined through the direction of the N-H⋯I hydrogen bonds. The coherence between organic bilayers along [100] is mainly achieved through van der Waals inter-actions.

HOMO stabilisation in π-extended dibenzotetrathiafulvalene derivatives for their application in organic field-effect transistors.

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB-TTF) central core and a 2,1,3-chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB-TTF, have been synthesised as active materials for organic field-effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron-withdrawing 2,1,3-chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution-processed single-crystal transistors exhibit high performance with a hole mobility up to 0.04 cm(2) V(-1) s(-1) as well as good ambient stability.

A compact tetrathiafulvalene-benzothiadiazole dyad and its highly symmetrical charge-transfer salt: ordered donor π-stacks closely bound to their acceptors.

A compact and planar donor-acceptor molecule 1 comprising tetrathiafulvalene (TTF) and benzothiadiazole (BTD) units has been synthesised and experimentally characterised by structural, optical, and electrochemical methods. Solution-processed and thermally evaporated thin films of 1 have also been explored as active materials in organic field-effect transistors (OFETs). For these devices, hole field-effect mobilities of µFE = (1.3±0.5)×10(-3) and (2.7±0.4)×10(-3)  cm(2) V s(-1) were determined for the solution-processed and thermally evaporated thin films, respectively. An intense intramolecular charge-transfer (ICT) transition at around 495 nm dominates the optical absorption spectrum of the neutral dyad, which also shows a weak emission from its ICT state. The iodine-induced oxidation of 1 leads to a partially oxidised crystalline charge-transfer (CT) salt {(1)2I3}, and eventually also to a fully oxidised compound {1I3}⋅1/2I2. Single crystals of the former CT compound, exhibiting a highly symmetrical crystal structure, reveal a fairly good room temperature electrical conductivity of the order of 2 S cm(-1). The one-dimensional spin system bears compactly bonded BTD acceptors (spatial localisation of the LUMO) along its ridge.

Tetrathiafulvalene-benzothiadiazoles as redox-tunable donor-acceptor systems: synthesis and photophysical study.

Electrochemical and photophysical analysis of new donor-acceptor systems 2 and 3, in which a benzothiadiazole (BTD) unit is covalently linked to a tetrathiafulvalene (TTF) core, have verified that the lowest excited state can be ascribed to an intramolecular-charge-transfer (ICT) π(TTF)→π*(benzothiadiazole) transition. Owing to better overlap of the HOMO and LUMO in the fused scaffold of compound 3, the intensity of the (1)ICT band is substantially higher compared to that in compound 2. The corresponding CT fluorescence is also observed in both cases. The radical cation TTF(+·) is easily observed through chemical and electrochemical oxidation by performing steady-state absorption experiments. Interestingly, compound 2 is photo-oxidized under aerobic conditions.

2,3-Dichloro-1,4-hydro-quinone 2,3-dichloro-1,4-benzoquinone monohydrate: a quinhydrone-type 1:1 donor-acceptor [D-A] charge-transfer complex.

IN THE CRYSTAL STRUCTURE OF THE TITLE COMPOUND (SYSTEMATIC NAME: 2,3-dichloro-benzene-1,4-diol 2,3-dichloro-cyclo-hexa-2,5-diene-1,4-dione monohydrate), C(6)H(4)Cl(2)O(2)·C(6)H(2)Cl(2)O(2)·H(2)O, the 2,3-dichloro-1,4-hydro-quinone donor (D) and the 2,3-dichloro-1,4-benzoquinone acceptor (A) mol-ecules form alternating stacks along [100]. Their mol-ecular planes [maximum deviations for non-H atoms: 0.0133 (14) (D) and 0.0763 (14) Š(A)] are inclined to one another by 1.45 (3)° and are thus almost parallel. There are π-π inter-actions involving the D and A mol-ecules, with centroid-centroid distances of 3.5043 (9) and 3.9548 (9) Å. Inter-molecular O-H⋯O hydrogen bonds involving the water mol-ecule and the hy-droxy and ketone groups lead to the formation of two-dimensional networks lying parallel to (001). These networks are linked by C-H⋯O inter-actions, forming a three-dimensional structure.

Heterocyclic amine directed synthesis of metal(II)-oxalates: investigating the magnetic properties of two complete series of chains with S = 5/2 to S = 1/2.

We report here two series of coordination polymer chains: the first being [M(II)(ox)(bnz)(2)](n) (M = Mn 1, Fe 2, Co 3, Ni 4, Cu 5 and Zn 6; ox = oxalate C(2)O(4)(2-); bnz = benzimidazole) and the second [M(II)(ox)(btz)(2)](n) (M = Mn 7, Fe 8, Co 9, Ni 10, Cu 11 and Zn 12; btz = benzotriazole). The first series displays an unusual homometallic [-M(i)-M(ii)-M(ii)-](n) chain topology and the second series is isostructural to [Fe(II)(ox)(btz)(2)](n), originally reported by Jia et al. (Collect. Czech. Chem. Commun., 2002, 67, 1609-1615). These two series allow us to make comparisons between the spin state of each metal and the magnetic coupling interaction within an isostructural series spanning the full range of spin states available in 3d metals and to investigate which models are the best to use in each case. Compound 8 is a single-chain magnet, the behaviour through spin-canting arising from a Dzyaloshinskii-Moriya interaction. Additionally, we have synthesised a two-dimensional coordination polymer {[Zn(II)(bnz)(4)][Zn(II)(2)(ox)(3)]}(n) (13), in which distorted hexagonal [Zn(II)(2)(ox)(3)](n)(2n-) layers are hydrogen bonded by [Zn(II)(bnz)(4)](2+) cations to give an interlayer separation of 12.001(2) Å.

Versatile strategy to access fully functionalized benzodifurans: redox-active chromophores for the construction of extended pi-conjugated materials.

An efficient synthetic approach to construct a fully substituted benzo[1,2-b:4,5-b']difuran (BDF) 2a via base-catalyzed double annulations is presented. Compound 2a can readily undergo Suzuki, Heck, and Sonogashira coupling reactions to afford in good yields a manifold of extended pi-conjugated BDF derivatives, e.g., with pyridine termini (4-6) and with different spacers. These are highly luminescent materials that undergo two reversible one-electron oxidations. Remarkably, their photophysical and electrochemical properties can be largely tuned by methylation or protonation. Consequently, they can function as pH-dependent fluorescence switches. Finally, the observed electronic properties are explained on the basis of density functional theory.

Photogeneration of nitrosyl linkage isomers in octahedrally coordinated platinum complexes in the red spectral range.

Octahedrally coordinated platinum nitrosyl complexes [Pt(NH(3))(4)(NO(3))(NO)](NO(3))(2) (1) and [Pt(NH(3))(4)(SO(4))(NO)](HSO(4))(CH(3)CN) (2) undergo linkage isomerization at temperatures below 130 K when excited with red light. Irradiation in the spectral range of 570-800 nm results in an inversion of the NO ligand from a Pt-NO to a Pt-ON configuration. The metastable state Pt-ON can be reverted back to the ground state (GS) Pt-NO by irradiation with blue-green or infrared light or by heating above 130 K. The characteristic shift of the nu(NO) stretching vibration from 1744 to 1815 cm(-1) in 1 and from 1714 to 1814 cm(-1) in 2 allowed the unambiguous identification of the respective nitrosyl isomers. Up to 26% of the complexes of 1 and 20% of 2 may be photochemically excited toward the metastable state (MS). Using X-ray crystallography and DFT calculations, it is shown that the Pt-NO in these {MNO}(8) complexes exhibits a bent arrangement with a Pt-N-O angle in the range of 117-120 degrees. As a consequence and in contrast to the known {MNO}(6) complexes only one metastable linkage isomer Pt-ON with a correspondingly bent Pt-O-N arrangement is formed, as evidenced by spectroscopy and DFT calculations. The calculated partial density of states shows that the charge transfer transition Pt(5d) --> pi(star)(NO) is responsible for the formation of the metastable state.

A compactly fused pi-conjugated tetrathiafulvalene-perylenediimide donor-acceptor dyad.

The synthesis and structural characterization of a tetrathiafulvalene-fused perylenediimide molecular dyad is presented. Its largely extended pi-conjugation provides intense optical absorption bands over a wide spectral range. The planar functional molecule exhibits a short-lived nonluminescent excited state attributed to intramolecular charge separation.

One-dimensional manganese coordination polymers composed of polynuclear cluster blocks and polypyridyl linkers: structures and properties.

The synthesis, crystal structures and magnetic properties of five new manganese compounds are reported. These include a linear trinuclear cluster [Mn(II)(3)(O(2)CCHMe(2))(6)(dpa)(2)].2MeCN (1) (dpa = 2,2'-dipyridylamine), a tetranuclear cluster [Mn(II)(2)Mn(III)(2)O(2)(O(2)CCMe(3))(6)(bpy)(2)] (3) (bpy = 2,2'-bipyridine), and chain coordination polymers composed of cluster blocks such as Mn(3), Mn(3)O, and Mn(4)O(2) bridged by 2,2'-bipyrimidine (bpm) or hexamethylentetramine (hmta) ligands to give ([Mn(II)(3)(O(2)CCHMe(2))(6)(bpm)].2EtOH)(n) (2), [Mn(II)(2)Mn(III)(2)O(2)(O(2)CCHMe(2))(6)(bpm)(EtOH)(4)](n) (4), and (([Mn(II)Mn(III)(2)O(O(2)CCHMe(2))(6)(hmta)(2)].EtOH)(n) (5). The magnetic analysis of the compounds was achieved using a combination of vector coupling and full-matrix diagonalization methods. Susceptibility data for compound 1 was fitted using a vector coupling model to give g = 2.02(1) and 2J/k(B) = -5.38(2) K. To model the trimer chain, we used vector coupling for initial values of J(1) and then diagonalization techniques to estimate J(2) to give g = 1.98(1), 2J(1)/k(B) = -3.3(1) K and 2J(2)/k(B) = -1.0(1) K by approximating the system to a dimer of trimers. The analysis of 3 was made difficult by the mixture of polymorphs and the difficulties of a three-J model, while for 4 an analysis was not possible because of the size of the computation and the relative magnitudes of the three couplings. Compound 5 was modeled using the same techniques as 2 to give g = 1.99(1), 2J(1)/k(B) = +32.5(2) K, 2J(2)/k(B) = -16.8(1) K, and 2J(3)/k(B) = +0.4(1) K. The combination of techniques has worked well for compounds 2 and 5 and thus opens up a method of modeling complex chains.

Crystalline, mixed-valence manganese analogue of prussian blue: magnetic, spectroscopic, X-ray and neutron diffraction studies.

The compound of stoichiometry Mn(II)3[Mn(III)(CN)6]2.zH2O (z = 12-16) (1) forms air-stable, transparent red crystals. Low-temperature single crystal optical spectroscopy and single crystal X-ray diffraction provide compelling evidence for N-bonded high-spin manganese(II), and C-bonded low-spin manganese(III) ions arranged in a disordered, face-centered cubic lattice analogous to that of Prussian Blue. X-ray and neutron diffraction show structured diffuse scattering indicative of partially correlated (rather than random) substitutions of [Mn(III)(CN)6] ions by (H2O)6 clusters. Magnetic susceptibility measurements and elastic neutron scattering experiments indicate a ferrimagnetic structure below the critical temperature Tc = 35.5 K.