Performance characteristics of a two-stage dark fermentative system producing hydrogen and methane continuously.

The performance of a mesophilic two-stage system generating hydrogen and methane continuously from sucrose (10-30 g/L) was investigated. A hydrogen-generating CSTR followed by an upflow anaerobic filter were both inoculated with anaerobically digested sewage sludge, and ORP, pH, gas output, %H(2), %CH(4) and %CO(2) monitored. pH was controlled with NaOH, KOH or Ca(OH)(2). Using NaOH as alkali with 10 g/L sucrose, yields of 1.62 +/- 0.2 mol H(2)/mol hexose added and 323 mL CH(4)/gCOD added to the hydrogen and methane reactors respectively were achieved. The overall chemical oxygen demand (COD) reduction was 92.6% with 0.90 +/- 0.1 g/L sodium and 316 +/- 40 mg/L residual acetate in the methane reactor. Operation at 20 g/L sucrose and NaOH as alkali led to impaired volatile fatty acid (VFA) degradation in the methane reactor with 2.23 +/- 0.2 g/L sodium, 1,885 mg/L residual acetate, a hydrogen yield of 1.47 +/- 0.1 mol/mol hexose added, a methane yield of 294 mL/gCOD added and an overall COD reduction of 83%. Using Ca(OH)(2) as alkali with 20 g/L sucrose gave a hydrogen yield of 1.29 +/- 0.3 mol/mol hexose added, a methane yield of 337 mL/gCOD added and improved the overall COD reduction to 91% with residual acetate concentrations of 522 +/- 87 mg/L. Operation at 30 g/L sucrose with Ca(OH)(2) gave poorer overall COD reduction (68%), a hydrogen yield of 1.47 +/- 0.2 mol/mol hexose added, a methane yield of 138 mL/gCOD added and residual acetate 7,343 +/- 715 mg/L. It was shown that sodium toxicity and overloading are important issues for successful anaerobic digestion of effluent from biohydrogen reactors in high rate systems.

Measurement of hydrogen peroxide in an advanced oxidation process using an automated biosensor.

A hydrogen peroxide biosensor was used to monitor hydrogen peroxide concentrations in a UV/hydrogen peroxide immobilised Fenton advanced oxidation process (AOP). The biosensor is based on gas phase monitoring and thus is more resistant to fouling from the liquid phase constituents of industrial processes. The biosensor is supplied with catalase continually, therefore overcoming any problems with enzyme degradation, which would occur in an immobilised enzyme biosensor. The biosensors response was linear within the experimental range 30-400mg H(2)O(2)l(-1) with a R(2) correlation of 0.99. The hydrogen peroxide monitor was used to monitor residual peroxide in an AOP, operated with a step overload of hydrogen peroxide, with correlation factors of 0.96-0.99 compared to offline hydrogen peroxide determinations by UV spectroscopy. Sparging the sample with nitrogen was found to be effective in reducing the interference from dissolved gases produced with the AOP itself. It is proposed that this biosensor could be used to improve the effectiveness of AOPs via hydrogen peroxide control.

Influence of substrate concentration on the stability and yield of continuous biohydrogen production.

The effect of substrate concentration (sucrose) on the stability and yield of a continuous fermentative process producing hydrogen was studied. High substrate concentrations are attractive from an energy standpoint as they would minimise the energy required for heating. The reactor was a CSTR; temperature was maintained at 35 degrees C; pH was controlled between 5.2 and 5.3, and the hydraulic retention time (HRT) was 12 h. Online measurements were taken for ORP, pH, temperature, %CO2, gas output and %H2, and data logged using a MatLAB data acquisition toolbox. Steady-state operation was obtained at 10, 20 and 40 g/L of sucrose in the influent, but a subsequent step change to 50 g/L was unsustainable. The hydrogen content ranged between 50% and 60%. The yield of hydrogen decreased as the substrate concentration increased from 1.7 +/- 0.2 mol/mol hexose added at 10 g/L, to 0.8 +/- 0.1 mol/mol at 50 g/L. Sparging with nitrogen improved the hydrogen yield by at least 35% at 40 g/L and at least 33% at 50 g/L sucrose. Sparging also enabled steady-state operation at 50 g/L sucrose. Addition of an extra 4 g/L of n-butyric acid to the reactor operating at 40 g/L sucrose increased the butyrate concentration from 9,830 to 18,900 mg/L, immediately stopping gas production and initiating the production of propionate, whilst the addition of 2 g/L taking the butyrate concentration to 12,200 mg/L did not do so. It was shown that operation at 50 g/L sucrose in a CSTR in butyrate fermentation is possible.

Continuous fermentative hydrogen production from a wheat starch co-product by mixed microflora.

For the transition to the hydrogen economy, hydrogen must be produced sustainably, e.g., by the fermentation of agricultural material. Continuous fermentative production of hydrogen from an insoluble substrate in nonsterile conditions is yet to be reported. In this study hydrogen production using mixed microflora from heat-treated digested sewage sludge in nonsterile conditions from a particulate co-product of the wheat flour industry (7.5 g L(-1) total hexose) at 18- and 12-hour hydraulic retention times, pH 4.5 and 5.2, 30 degrees C and 35 degrees C was examined. In continuous operation, hydrogen yields of approximately 1.3 moles hydrogen/mole hexose consumed were obtained, but decreased if acetate or propionate levels rose, indicating metabolism shifted towards hydrogen consumption by homoacetogenesis or propionate producers. These shifts occurred both at pH 4.5 and 5.2. Sparging the reactor with nitrogen to reduce hydrogen in the off-gas from 50% to 7% gave stable operation with a hydrogen yield of 1.9 moles hydrogen /mole hexose consumed over an 18-day period.

Development of a static headspace gas chromatographic procedure for the routine analysis of volatile fatty acids in wastewaters.

An optimised procedure has been developed for the routine analysis of volatile fatty acids in wastewater matrices, using static headspace gas chromatography with flame ionisation detection. Factors such as sample volume, sample pre-treatment and the time and temperature of sample equilibration have been included in an optimisation model designed to provide maximum detector response for acetic, propionic, iso- and n-butyric and iso- and n-valeric acids in the concentration range 0-1000 mg/l. Optimal headspace conditions were observed when equilibrating at 85 degrees C for 30 min, using a 2.0 ml sample volume with the addition of 1.0 ml of NaHSO4 (62%, w/v) into standard 22.3 ml vials. 2-Ethylbutyric acid was used as an internal standard. The suitability of ordinary least squares regression and weighted least squares regression models for the purposes of calibration and quantification were investigated. A weighted least squares linear regression model applied to the heteroscedastic data provided lower detection limits, e.g. 3.7 and 3.3 mg/l for acetic and propionic acids.

Azo-dye degradation in an anaerobic-aerobic treatment system operating on simulated textile effluent.

Decolorisation of azo dyes during biological effluent treatment can involve both adsorption to cell biomass and degradation by azo-bond reduction during anaerobic digestion. Degradation is expected to form aromatic amines, which may be toxic and recalcitrant to anaerobic treatment but degradable aerobically. Methods for the quantitative detection of substituted aromatic amines arising from azo-dye cleavage are complex. A simple qualitative method is suggested as a way in which to investigate whether decolorisation is actually due to degradation, and whether the amines generated are successfully removed by aerobic treatment. Samples from a combined anaerobic-aerobic system used for treating a simulated textile wastewater containing the reactive azo dye Procion Red H-E7B were analysed by high-performance liquid chromatography/ultraviolet (HPLC-UV) methods. Anaerobic treatment gave significant decolorisation, and respiration-inhibition tests showed that the anaerobic effluent had an increased toxicity, suggesting azo-dye degradation. The HPLC method showed that more polar, UV-absorbing compounds had been generated. Aerobically, these compounds were removed or converted to highly polar compounds, as shown by HPLC analysis. Since the total organic nitrogen (TON) decreased aerobically as organic N-containing compounds were mineralised, aromatic amine degradation is suggested. Although only a simple qualitative HPLC method was used, colour removal, toxicity and TON removal all support its usefulness in analysing biotreatment of azo dyes.

Characterization of a prototype industrial on-line analyzer for bicarbonate/carbonate monitoring.

In many biological reactors bicarbonate is the major species determining pH buffering capacity, or alkalinity. In anaerobic digesters bicarbonate levels should be within 10 to 50 mM for stable operation. Bicarbonate alkalinity in wastewater treatment processes in routinely measured off-line titrimetrically. Recently we have described the principle of a novel on-line method of measuring bicarbonate alkalinity. In the prototype device described here, a continuous stream (15 cm(3) min(-1)) of the substrate to be monitored was saturated with gaseous CO2, acidified by the addition of excess acid, and the rate of carbon dioxide evolution, proportional to the concentration of bicarbonate/carbonate in the liquid flow, continuously measured by a sensitive gas meter. The instrument was robust and its response was satisfactory for wastewater treatment process control applications, with linearity in the range 5 to 50 mM HCO3(-), a response time in the order of 30 min, and accuracy of the order of 7% in the concentration range 5 to 50 mM sodium bicarbonate. The device was not affected by interference from volatile fatty acids, does not make use of pH probes which in many wastes are subject to fouling, and may form the basis of a digester control strategy.

Normative data of hemoglobin concentration and free erythrocyte protoporphyrin in a private pediatric practice: a 1990 update.

Free erythrocyte protoporphyrin (FEP) and hemoglobin (Hgb) concentrations were tested in 790 children in a private pediatric office; results were compared to those obtained in 1984. Only 16 children (2%) had abnormal FEPs in 1990 compared to 76 children (9.6%) in the earlier study. The mean FEP in the normal group also decreased significantly in each age group studied. The hemoglobin concentrations were not significantly different in most of the age groups studied. Screening for iron deficiency in our pediatric practice by determining hemoglobin and FEP concentrations had a much lower yield in 1990 than in 1984.

New medical standards for Virginia's high school athletes.

Virginia physicians administering preparticipation physicals to high school athletes this fall are using the new, expanded examination form that appears in this issue. Representing multidisciplinary input and incorporating current sports medicine information, the form is designed to identify the student at high risk for injury and to evaluate for a specific sport. After a two-year pilot program conducted by the authors the new form was officially adopted by the Virginia High School League.