Solar-Blind Photodetector Arrays Fabricated by Weaving Strategy.

The quest for solar-blind photodetectors (SBPDs) with exceptional optoelectronic properties for imaging applications has prompted the investigation of SBPD arrays. Ga2O3, characterized by its ultrawide bandgap and low growth cost, has emerged as a promising material for solar-blind detection. In this study, SBPD arrays were fabricated by weaving Sn-doped ß-Ga2O3 microbelts (MBs). These MBs, which have a conductive core surrounded by a high-resistivity depletion surface layer resulting from the segregation of Sn and oxygen, are woven into a grid structure. Each intersection of the MBs functions as a photodetector pixel, with the intersecting MBs serving as the output electrodes of the pixel. This design simplifies the readout circuit for the photodetector array. The solar-blind photodetector array demonstrates superior solar-blind detection performance, including a dark current of 0.5 pA, a response time of 38.8 µs, a light/dark current ratio of 108, and a responsivity of 300 A/W. This research may provide a feasible strategy for the fabrication of photodetector arrays, thus pushing forward the application of photodetectors in imaging.

High-Performance UV-Vis Broad-Spectra Photodetector Based on a ß-Ga2O3/Au/MAPbBr3 Sandwich Structure.

The UV-vis photodetector (PD), a detector that can simultaneously detect light in the ultraviolet region and the visible region, has a wide range of applications in military and civilian fields. Currently, it is very difficult to obtain good detection performance in the UV region (especially in the solar-blind range) like in the visible region with most UV-vis PDs. This severely affects the practical application of UV-vis broad-spectra PDs. Here, a simple sandwich structure PD (SSPD) composed of ß-Ga2O3, Au electrodes, and the MAPbBr3 perovskite is designed and fabricated to simultaneous enhance the detection performance in the UV and visible light regions. The ß-Ga2O3/Au/MAPbBr3 SSPD exhibits enhanced optoelectronic performance with high responsivities of 0.47 and 1.43 A W-1 at 240 and 520 nm under a bias of 6 voltage (V), respectively, which are 8.5 and 23 times than that of the metal-semiconductor-metal (MSM) structure MAPbBr3 PD at 6 V, respectively. The enhanced performance was attributed to the effective suppression of carrier recombination due to the efficient interface charge separation in the device structure. In addition, the self-powered response characteristic is also realized by forming a type-II heterojunction between ß-Ga2O3 and MAPbBr3, which gives the ß-Ga2O3/Au/MAPbBr3 SSPD superior single-pixel photo-imaging ability without an external power supply. This work provides a simple and effective method for the preparation of high-performance self-powered imaging PDs in the UV-visible region.

Ga2O3-Based Solar-Blind Position-Sensitive Detector for Noncontact Measurement and Optoelectronic Demodulation.

As a kind of photodetector, position-sensitive-detectors (PSDs) have been widely used in noncontact photoelectric positioning and measurement. However, fabrications and applications of solar-blind PSDs remain yet to be harnessed. Herein, we demonstrate a solar-blind PSD developed from a graphene/Ga2O3 Schottky junction with a 25-nanometer-thick Ga2O3 film, in which the absorption of the nanometer-thick Ga2O3 is enhanced by multibeam interference. The graphene/Ga2O3 junction exhibits a responsivity of 48.5 mA/W and a rise/decay time of 0.8/99.8 µs at zero bias. Moreover, the position of the solar-blind spot can be determined by the output signals of the PSD. Using the device as a sensor of noncontact test systems, we demonstrate its application in measurement of angular, displacement, and light trajectory. In addition, the position-sensitive outputs have been used to demodulate optical signals into electrical signals. The results may prospect the application of solar-blind PSDs in measurement, tracking, communication, and so on.

Wavelength-Tunable Ultraviolet Electroluminescence from Ga-Doped ZnO Microwires.

The usage of ZnO as active layers to fabricate hybrid heterojunction light-emitting diodes is expected to be an effective approach for ultraviolet light sources. Individual ZnO microwires with controlled gallium (Ga) incorporation (ZnO/Ga MWs) have been fabricated via a chemical vapor deposition method. It is found that with the increasing Ga-incorporated concentration, the near-band-edge (NBE) photoluminescence of the ZnO MWs blue-shifted gradually from 390 to 370 nm. Heterojunction diodes comprising single ZnO/Ga MWs and p-GaN have been fabricated. With increasing injection currents, the interfacial emissions can be suppressed effectively and the typical NBE emission dominates the electroluminescence (EL). In particular, with increasing Ga-doping concentration, the dominant EL emission wavelengths of the ZnO/Ga MW-based heterojunction diodes blue-shifted from 384 to 372 nm, and the blue shift can be ascribed to the Burstein-Moss effect induced by the Ga incorporation. The present work demonstrates the feasibility of optical band gap engineering of ZnO MWs and the potential application for wavelength-tuning ultraviolet light sources.

Wavelength-Tunable Electroluminescent Light Sources from Individual Ga-Doped ZnO Microwires.

Electrically driven wavelength-tunable light emission from biased individual Ga-doped ZnO microwires (ZnO:Ga MWs) is demonstrated. Single crystalline ZnO:Ga MWs with different Ga-doping concentrations have been synthesized using a one-step chemical vapor deposition method. Strong electrically driven light emission from individual ZnO:Ga MW based devices is realized with tunable colors, and the emission region is localized toward the center of the wires. Increasing Ga-doping concentration in the MWs can lead to the redshift of electroluminescent emissions in the visible range. Interestingly, owing to the lack of rectification characteristics, relevant electrical measurement results show that the alternating current-driven light emission functions excellently on the ZnO:Ga MWs. Consequently, individual ZnO:Ga MWs, which can be analogous to incandescent sources, offer unique possibilities for future electroluminescence light sources. This typical multicolor emitter can be used to rival and complement other conventional semiconductor devices in displays and lighting.

Rewritable Painting Realized from Ambient-Sensitive Fluorescence of ZnO Nanoparticles.

Paper, as one of the most important information carriers, has contributed to the development and transmission of human civilization greatly. Meanwhile, a serious problem of environmental sustainable development caused by the production and utilization of paper has been resulted to modern society. Therefore, a simple and green route is urgently demanded to realize rewritable painting on paper. Herein, a simple route to rewritable painting on copy paper has been demonstrated by using eco-friendly ZnO nanoparticles (NPs) as fluorescent ink, and vinegar and soda that are frequently used in kitchen as erasing and neutralizing agents. Words or patterns written using the ZnO NPs as ink can be erased by vinegar vapour within five seconds, and after a neutralizing process in the ambient of soda vapour, the paper can be used for writing again. It is worth noting that the resolution and precision of the patterns produced via the above route degrade little after ten rewriting cycles, and the quality of the patterns produced using the ZnO NPs as ink fades little after being storage for several months, which promises the versatile potential applications of the rewriting route proposed in this paper.