Energy-efficient dispersion compensation for digital micromirror device.

Due to the wave nature of light, the diffraction pattern generated by an optical device is sensitive to the shift of wavelength. This fact significantly compromises the digital micromirror device (DMD) in applications, such as full-color holographic display and multi-color fluorescence microscopy. The existing dispersion compensation techniques for DMD involve adding diffractive elements, which causes a large amount of waste of optical energy. Here, we propose an energy-efficient dispersion compensation method, based on a dispersive prism, for DMD. This method simulates the diffraction pattern of the optical fields reflected from the DMD with an angular spectrum model. According to the simulation, a prism and a set of optical components are introduced to compensate for the angular dispersion of DMD-modulated optical fields. In the experiment, our method reduced the angular dispersion, between the 532 nm and 660 nm light beams, by a factor of ∼8.5.

High-fidelity multi-channel optical information transmission through scattering media.

High-fidelity optical information transmission through strongly scattering media is challenging, but is crucial for the applications such as the free-space optical communication in a haze or fog. Binarizing optical information can somehow suppress the disruptions caused by light scattering. However, this method gives a compromised communication throughput. Here, we propose high-fidelity multiplexing anti-scattering transmission (MAST). MAST encodes multiple bits into a complex-valued pattern, loads the complex-valued pattern to an optical field through modulation, and finally employs a scattering matrix-assisted retrieval technique to reconstruct the original information from the speckle patterns. In our demonstration, we multiplexed three channels and MAST achieved a high-fidelity transmission of 3072 (= 1024× 3) bits data per transmission and average transmission error as small as 0.06%.

Erratum: Wavefront shaping improves the transparency of the scattering media: a review (Publisher's Note).

[This corrects the article DOI: 10.1117/1.JBO.29.S1.S11507.].

Wavefront shaping improves the transparency of the scattering media: a review.

Significance: Wavefront shaping (WFS) can compensate for distortions by optimizing the wavefront of the input light or reversing the transmission matrix of the media. It is a promising field of research. A thorough understanding of principles and developments of WFS is important for optical research. Aim: To provide insight into WFS for researchers who deal with scattering in biomedicine, imaging, and optical communication, our study summarizes the basic principles and methods of WFS and reviews recent progress. Approach: The basic principles, methods of WFS, and the latest applications of WFS in focusing, imaging, and multimode fiber (MMF) endoscopy are described. The practical challenges and prospects of future development are also discussed. Results: Data-driven learning-based methods are opening up new possibilities for WFS. High-resolution imaging through MMFs can support small-diameter endoscopy in the future. Conclusion: The rapid development of WFS over the past decade has shown that the best solution is not to avoid scattering but to find ways to correct it or even use it. WFS with faster speed, more optical modes, and more modulation degrees of freedom will continue to drive exciting developments in various fields.

Multi-view stitching phase measuring deflectometry for freeform specular surface metrology.

Phase measuring deflectometry (PMD) offers notable advantages for precision inspection of specular elements. Nevertheless, if confronts challenges when measuring freeform specular surfaces due to the dispersion of reflection rays from surfaces with high local slopes. Here, we propose a multi-view stitching PMD. It utilizes distinct sensors combining with a screen to capture the appearance of each region. After precisely calibrating the entire system to correct the absolute depth of each region, the appearances of all regions are precisely stitched together, reconstructing the comprehensive appearance of the surface. Through experimental setup, we measured the 3D morphology of a spherical lens with a curvature radius of 155.04 mm and a peak-to-valley (PV) value of 2.9 mm, which yielded a measurement accuracy of 5.3 µm (relative error: 0.18 %). Furthermore, we successfully measured the appearance of a curved mobile phone screen with local slopes ranging from -46.1° to 51.3°, and freeform acrylic sheet with local slopes ranging from -6.7° to 7.7° and a PV value of 5.3 mm.

An ultrahigh-fidelity 3D holographic display using scattering to homogenize the angular spectrum.

A three-dimensional (3D) holographic display (3DHD) can preserve all the volumetric information about an object. However, the poor fidelity of 3DHD constrains its applications. Here, we present an ultrahigh-fidelity 3D holographic display that uses scattering for homogenization of angular spectrum. A scattering medium randomizes the incident photons and homogenizes the angular spectrum distribution. The redistributed field is recorded by a photopolymer film with numerous modulation modes and a half-wavelength scale pixel size. We have experimentally improved the contrast of a focal spot to 6 × 106 and tightened its spatial resolution to 0.5 micrometers, respectively ~300 and 4.4 times better than digital approaches. By exploiting the spatial multiplexing ability of the photopolymer and the transmission channel selection capability of the scattering medium, we have realized a dynamic holographic display of 3D spirals consisting of 20 foci across 1 millimeter × 1 millimeter × 26 millimeters with uniform intensity.

Anti-scattering light focusing with full-polarization digital optical phase conjugation based on digital micromirror devices.

The high resolution of optical imaging and optogenetic stimulation in the deep tissue requires focusing light against strong scattering with high contrast. Digital optical phase conjugation (DOPC) has emerged recently as a promising solution for this requirement, because of its short latency. A digital micromirror device (DMD) in the implementation of DOPC enables a large number of modulation modes and a high speed of modulation both of which are important when dealing with a highly dynamic scattering medium. Here, we propose full-polarization DOPC (fpDOPC) in which two DMDs simultaneously modulate the two orthogonally polarized components of the optical field, respectively, to mitigate the effect of depolarization caused by strong scattering. We designed a simple system to overcome the difficulty of alignment encountered when modulating two polarized components independently. Our simulation and experiment showed that fpDOPC could generate a high-contrast focal spot, even though the polarization of light had been highly randomized by scattering. In comparison with the conventional method of modulating the polarization along a particular direction, fpDOPC can improve the peak to background ratio of the focal spot by a factor of two. This new technique has good potential in applications such as high-contrast light focusing in vivo.

Anti-scattering light focusing by fast wavefront shaping based on multi-pixel encoded digital-micromirror device.

Speed and enhancement are the two most important metrics for anti-scattering light focusing by wavefront shaping (WS), which requires a spatial light modulator with a large number of modulation modes and a fast speed of response. Among the commercial modulators, the digital-micromirror device (DMD) is the sole solution providing millions of modulation modes and a pattern rate higher than 20 kHz. Thus, it has the potential to accelerate the process of anti-scattering light focusing with a high enhancement. Nevertheless, modulating light in a binary mode by the DMD restricts both the speed and enhancement seriously. Here, we propose a multi-pixel encoded DMD-based WS method by combining multiple micromirrors into a single modulation unit to overcome the drawbacks of binary modulation. In addition, to efficiently optimize the wavefront, we adopted separable natural evolution strategies (SNES), which could carry out a global search against a noisy environment. Compared with the state-of-the-art DMD-based WS method, the proposed method increased the speed of optimization and enhancement of focus by a factor of 179 and 16, respectively. In our demonstration, we achieved 10 foci with homogeneous brightness at a high speed and formed W- and S-shape patterns against the scattering medium. The experimental results suggest that the proposed method will pave a new avenue for WS in the applications of biomedical imaging, photon therapy, optogenetics, dynamic holographic display, etc.

Gradient-assisted focusing light through scattering media.

Focusing light through a scattering medium is a longstanding challenge in biomedical optics, to which wavefront shaping is a powerful solution. The state-of-the-art feedback-based approach is the widely used genetic algorithm method. However, it can only achieve relatively low enhancement of the focus, and the genetic algorithm is known to be time-consuming. To tackle those issues, we propose a gradient-assisted strategy for wavefront shaping. The proposed method conducts optimization in the function distribution space. Specifically, when optimizing the parameters along each iteration, the consequent function distribution changes within a distance as measured by the Kullback-Leibler divergence. Taking advantage of the gradient information, the proposed method is over 60× faster to obtain the same peak-to-background ratio (PBR) level. Compared with the genetic algorithm that is able to optimize a number of 64×64 phase segments, the proposed gradient strategy is able to optimize 256×256 phase segments, and gives 20× higher focus enhancement as quantified by the PBR.

Research on the Temperature Characteristics of the Photoacoustic Sensor of Glucose Solution.

In order to weaken the influence of temperature on photoacoustic (PA) measurements and compensate PA signals with a proposed theoretical model, the relationship of PA signal amplitude with temperature, under the condition of different glucose concentrations and different light intensities, was studied in this paper. First, the theoretical model was derived from the theory of the PA effect. Then, the temperature characteristics of the PA signals were investigated, based on the analyses of the temperature-dependent Grüneisen parameter in glucose solution. Next, the concept of a PA temperature coefficient was proposed in this paper. The result of the theoretical analysis shows that this coefficient is linear to light intensity and irrelevant to the concentration of glucose solution. Furthermore, a new concept of a PA temperature coefficient of unit light intensity was proposed in this paper. This coefficient is approximately constant, with different light intensities and solution concentrations, which is similar to the thermal expansion coefficient. After calculation, the PA temperature coefficient by the unit light intensity of glucose solution is about 0.936 bar/K. Finally, relevant experiments were carried out to verify the theoretical analysis, and the PA temperature coefficient of the unit light intensity of glucose solution is about 0.04/°C. This method can also be used in sensors measuring concentrations in other aqueous solutions.

Laser stripe extraction method in industrial environments utilizing self-adaptive convolution technique.

A line-structured laser scanner is widely applied for 3D reconstruction in industrial environments with ubiquitous various luminance, complicated background, diverse objects, and instable lasers. These elements will show up as noise in the obtained laser stripe images. Therefore, the basic and key point for a line-structured laser scanner is to accurately extract the laser stripe from noise. This paper proposes an effective laser stripe extraction procedure with two steps. First, a novel laser stripe center extraction method based on the geometry information and correlation in the laser stripe, is designed to significantly eliminate noise and accurately extract the laser stripe centers. In addition, the robustness, speed, and accuracy of this method are respectively analyzed in detail. Second, piecewise fitting is adopted to acquire a smooth and continuous laser stripe centerline. In order to select the optimal fitting method, the characteristics of two spline methods, Akima spline and cubic Hermite spline, are deeply analyzed and compared. Finally, an experiment is carried out by using a rough metal step and a line-structured laser scanning system. The experiment results demonstrate that the proposed self-adaptive convolution-mass method can significantly eliminate noise in industrial environments. In addition, the cubic Hermite spline is a better choice for 3D reconstruction, rather than the Akima spline.

Glucose solution determination based on liquid photoacoustic resonance.

Noninvasive blood glucose determination has received considerable attention in the past from both patients and scientists all over the world, and it is becoming increasingly important as a research focus. The two most difficult problems leading to no breakthrough in this area are sensitivity and specificity in determination. In order to obtain reliable measurement results of blood glucose levels, we propose a new liquid photoacoustic resonance theory that can significantly enhance the intensity of the signal and improve the sensitivity. This paper demonstrates the theory of liquid photoacoustic resonance, gives a rigorous mathematical expression, and analyzes the variation of the transducer output in the case of liquid photoacoustic resonance. A signal processing method is demonstrated at the same time under the liquid photoacoustic resonance condition. Meanwhile, the feasibility and validity are verified by experiments with different concentrations of glucose solution. The result shows that liquid photoacoustic resonance can strengthen the signal, and the resolution achieves 20 mg/dL. This method overcomes the issue of low sensitivity and the inaccurate detection in the nonresonant case, and gets accurate results. This result could provide a theoretical basis for realization of noninvasive measurement of blood glucose.