Improvement of Photovoltaic Performance of Perovskite Solar Cells by Synergistic Modulation of SnO2 and Perovskite via Interfacial Modification.

In the past decade, perovskite solar cell (PSC) photoelectric conversion efficiency has advanced significantly, and tin dioxide (SnO2) has been extensively used as the electron transport layer (ETL). Due to its high electron mobility, strong chemical stability, energy level matching with perovskite, and easy low-temperature fabrication, SnO2 is one of the most effective ETL materials. However, the SnO2 material as an ETL has its limitations. For example, SnO2 films prepared by low-temperature spin-coating contain a large number of oxygen vacancies, resulting in energy loss and high open-circuit voltage (VOC) loss. In addition, the crystal quality of perovskites is closely related to the substrate, and the disordered crystal orientation will lead to ion migration, resulting in a large number of uncoordinated Pb2+ defects. Therefore, interface optimization is essential to improve the efficiency and stability of the PSC. In this work, 2-(5-chloro-2-benzotriazolyl)-6-tert-butyl-p-cresol (CBTBC) was introduced for ETL modification. On the one hand, the hydroxyl group of CBTBC forms a Lewis mixture with the Sn atom, which reduces the oxygen vacancy defect and prevents nonradiative recombination. On the other hand, the SnO2/CBTBC interface can effectively improve the crystal orientation of perovskite by influencing the crystallization kinetics of perovskite, and the nitrogen element in CBTBC can effectively passivate the uncoordinated Pb2+ defects at the SnO2/perovskite interface. Finally, the prevailing PCE of PSC (1.68 eV) modified by CBTBC was 20.34% (VOC = 1.214 V, JSC = 20.49 mA/cm2, FF = 82.49%).

Strain Regulation of Mixed-Halide Perovskites Enables High-Performance Wide-Bandgap Photovoltaics.

Wide-bandgap mixed-halogen perovskite materials are widely used as top cells in tandem solar cells. However, serious open-circuit voltage (Voc) loss restricts the power conversion efficiency (PCE) of wide-bandgap perovskite solar cells (PSCs). Herein, it is shown that the resulting methylammonium vacancies induce lattice distortion in methylammonium chloride-assisted perovskite film, resulting in an inhomogeneous halogen distribution and low Voc. Thus, a lattice strain regulation strategy is reported to fabricate high-performance wide-bandgap PSCs. Rubidium (Rb) cations are introduced to fill the A-site vacancy caused by the methylammonium volatilization, which alleviates shrinkage strain of the perovskite crystal. The reduced lattice distortion and increased halide ion migration barrier result in a homogeneous mixed-halide perovskite film. Due to improved carrier transport and suppressed nonradiative recombination, the Rb-treated wide-bandgap PSC (1.68 eV) achieves an excellent PCE of 21.72%, accompanied by a high Voc of 1.22 V. The resulting device maintains more than 90% of its initial PCE after 1500 h under 1-sun illumination conditions.

Eliminating Halogen Vacancies Enables Efficient MACL-Assisted Formamidine Perovskite Solar Cells.

Methylammonium chloride (MACl) additive is almost irreplaceable in high-performance formamidine perovskite photovoltaics. Nevertheless, Some of the problems that can arise from adding MACl are rarely mentioned. Herein, it is proposed for the first time that the addition of MACl would cause the non-stoichiometric ratio in the perovskite film, resulting in the halogen vacancy. It is demonstrated that the non-synchronous volatilization of methylamine cations and chloride ions leads to the formation of halogen vacancy defects. To solve this problem, the NH4 HCOO is introduced into the perovskite precursor solution to passivate the halogen vacancy. The HCOO- ions have a strong force with lead ions and can fill the halogen vacancy defects. Consequently, the champion devices' power conversion efficiency (PCE) can be improved from 21.23% to 23.72% with negligible hysteresis. And the unencapsulated device can still retain >90% of the initial PCE even operating in N2 atmosphere for over 1200 h. This work illustrates another halogen defect source in the MACl-assisted formamidine perovskite photovoltaics and provides a new route to obtain high-performance perovskite solar cells.

Lattice Strain Regulation Enables High-Performance Formamidinium Perovskite Photovoltaics.

Formamidinium lead iodide (FAPbI3 ) perovskite possesses an ideal optical bandgap and is a potential material for fabricating the most efficient single-junction perovskite solar cells (PSCs). Nevertheless, large formamidinium (FA) cations result in residual lattice strain, which reduces the power conversion efficiency (PCE) and operational stability of PSCs. Herein, the modulation of lattice strain in FAPbI3 crystals via a π-conjugated organic amine, i.e., 4-pyrene oxy butylamine (PYBA), is proposed. PYBA pairs at the grain boundary serve as a template for the crystallization of FAPbI3 perovskite, thereby inducing a highly oriented crystal and a pure α-phase film. The PYBA pairs with strong π-π interactions provide a solid fulcrum for external compression strain, thus compensating for the inherent tension strain of FAPbI3 crystals. The strain release elevates the valence band of the perovskite crystals, thereby decreasing the bandgap and trap density. Consequently, the PYBA-regulated FAPbI3 PSC achieves an excellent PCE of 24.76%. Moreover, the resulting device exhibits improves operational stability and maintains over 80% of its initial PCE after 1500 h under maximum power point tracking conditions.

Circadian rhythm promotes the biomass and amylose hyperaccumulation by mixotrophic cultivation of marine microalga Platymonas helgolandica.

BACKGROUND: Microalgal starch can be exploited for bioenergy, food, and bioplastics. Production of starch by green algae has been concerned for many years. Currently commonly used methods such as nutrient stress will affect cell growth, thereby inhibiting the production efficiency and quality of starch production. Simpler and more efficient control strategies need to be developed. RESULT: We proposed a novel regulation method to promote the growth and starch accumulation by a newly isolated Chlorophyta Platymonas helgolandica. By adding exogenous glucose and controlling the appropriate circadian light and dark time, the highest dry weight accumulation 6.53 g L-1 (Light:Dark = 12:12) can be achieved, and the highest starch concentration could reach 3.88 g L-1 (Light:Dark = 6:18). The highest production rate was 0.40 g L-1 d-1 after 9 days of production. And this method helps to improve the ability to produce amylose, with the highest accumulation of 39.79% DW amylose. We also discussed the possible mechanism of this phenomenon through revealing changes in the mRNA levels of key genes. CONCLUSION: This study provides a new idea to regulate the production of amylose by green algae. For the first time, it is proposed to combine organic carbon source addition and circadian rhythm regulation to increase the starch production from marine green alga. A new starch-producing microalga has been isolated that can efficiently utilize organic matter and grow with or without photosynthesis.

High-performance large-area quasi-2D perovskite light-emitting diodes.

Serious performance decline arose for perovskite light-emitting diodes (PeLEDs) once the active area was enlarged. Here we investigate the failure mechanism of the widespread active film fabrication method; and ascribe severe phase-segregation to be the reason. We thereby introduce L-Norvaline to construct a COO--coordinated intermediate phase with low formation enthalpy. The new intermediate phase changes the crystallization pathway, thereby suppressing the phase-segregation. Accordingly, high-quality large-area quasi-2D films with desirable properties are obtained. Based on this, we further rationally adjusted films' recombination kinetics. We reported a series of highly-efficient green quasi-2D PeLEDs with active areas of 9.0 cm2. The peak EQE of 16.4% is achieved in = 3, represent the most efficient large-area PeLEDs yet. Meanwhile, high brightness device with luminance up to 9.1 × 104 cd m-2 has achieved in = 10 film.

High-performance quasi-2D perovskite light-emitting diodes: from materials to devices.

Quasi-two-dimensional (quasi-2D) perovskites have attracted extraordinary attention due to their superior semiconducting properties and have emerged as one of the most promising materials for next-generation light-emitting diodes (LEDs). The outstanding optical properties originate from their structural characteristics. In particular, the inherent quantum-well structure endows them with a large exciton binding energy due to the strong dielectric- and quantum-confinement effects; the corresponding energy transfer among different n-value species thus results in high photoluminescence quantum yields (PLQYs), particularly at low excitation intensities. The review herein presents an overview of the inherent properties of quasi-2D perovskite materials, the corresponding energy transfer and spectral tunability methodologies for thin films, as well as their application in high-performance LEDs. We then summarize the challenges and potential research directions towards developing high-performance and stable quasi-2D PeLEDs. The review thus provides a systematic and timely summary for the community to deepen the understanding of quasi-2D perovskite materials and resulting LED devices.

Scalable Assembly of Flexible Ultrathin All-in-One Zinc-Ion Batteries with Highly Stretchable, Editable, and Customizable Functions.

Aqueous zinc-ion batteries (ZIBs) are considered to be a promising candidate for flexible energy storage devices due to their high safety and low cost. However, the scalable assembly of flexible ZIBs is still a challenge. Here, a scalable assembly strategy is developed to fabricate flexible ZIBs with an ultrathin all-in-one structure by combining blade coating with a rolling assembly process. Such a unique all-in-one integrated structure can effectively avoid the relative displacement or detachment between neighboring components to ensure continuous and effective ion- and/or loading-transfer capacity under external deformation, resulting in excellent structural and electrochemical stability. Furthermore, the ultrathin all-in-one ZIBs can be tailored and edited controllably into desired shapes and structures, further extending their editable, stretchable, and shape-customized functions. In addition, the ultrathin all-in-one ZIBs display the ability to integrate with perovskite solar cells to achieve an energy harvesting and storage integrated system. These enlighten a broad area of flexible ZIBs to be compatible with highly flexible and wearable electronics. The scaling-up assembly strategy provides a route to design other ultrathin all-in-one energy storage devices with stretchable, editable, and customizable behaviors.

Tuning Surface Wettability of Buffer Layers by Incorporating Polyethylene Glycols for Enhanced Performance of Perovskite Solar Cells.

Phenyl-C61-butyric acid methyl ester (PCBM) has been widely researched as a passivate electron transport layer in planar n-i-p-type perovskite solar cells (PSCs). However, due to the terrible wettability of PCBM, the growth of perfect large-area perovskite films on the electron transport layer treated by PCBM is a huge challenge, which limits the commercial application of PSCs. Herein, we incorporate a hydrophilic polymer polyethylene glycol (PEG) into PCBM to ameliorate its wettability. A high-quality perovskite film can be prepared on a 2 × 2 cm substrate. Hydrogen-bonding effects between the PEG-PCBM buffer layer and the perovskite layer can further stabilize the electron transport layer/perovskite interface. Based on the improved electron transport and suppressed carrier recombination, a device with an active area of 1.03 cm2 achieves an efficiency of 18.25%. In addition, the first-principles calculations indicate that PEG has stronger adsorption (Eads = -0.37) toward H2O than the MAPbI3 perovskite (Eads = -0.25), which can prevent water molecules from infiltrating the perovskite. The unsealed device still maintains 90% of the initial efficiency under ambient conditions, with 30-40% relative humidity for 22 days. These outstanding properties are attributed to the unique molecular structure and prominent wettability of PEG.

Structured Perovskite Light Absorbers for Efficient and Stable Photovoltaics.

Organic-inorganic hybrid lead-halide perovskite materials (ABX3 ) have attracted widespread attention in the field of photovoltaics owing to their impressive optical and electrical properties. However, obstacles still exist in the commercialization of perovskite photovoltaics, such as poor stability, hysteresis, and human toxicity. A-site cation engineering is considered to be a powerful tool to tune perovskite structures and the resulting optoelectronic properties. Based on the selection and combination of A-site cations, three types of perovskite structures, i.e., 3D perovskite, reduced-dimensional (2D/quasi-2D) perovskite, and 2D/3D hybrid perovskite can be formed. Herein, the remarkable breakthroughs resulting from these three perovskite structures are summarized, and their corresponding properties and characteristics, as well as their intrinsic disadvantages, are highlighted. By summarizing recent research progress, a new viewpoint for improving the performance and stability of perovskite photovoltaics is provided.

Reduced-dimensional perovskite photovoltaics with homogeneous energy landscape.

Reduced-dimensional (quasi-2D) perovskite materials are widely applied for perovskite photovoltaics due to their remarkable environmental stability. However, their device performance still lags far behind traditional three dimensional perovskites, particularly high open circuit voltage (Voc) loss. Here, inhomogeneous energy landscape is pointed out to be the sole reason, which introduces extra energy loss, creates band tail states and inhibits minority carrier transport. We thus propose to form homogeneous energy landscape to overcome the problem. A synergistic approach is conceived, by taking advantage of material structure and crystallization kinetic engineering. Accordingly, with the help of density functional theory guided material design, (aminomethyl) piperidinium quasi-2D perovskites are selected. The lowest energy distribution and homogeneous energy landscape are achieved through carefully regulating their crystallization kinetics. We conclude that homogeneous energy landscape significantly reduces the Shockley-Read-Hall recombination and suppresses the quasi-Fermi level splitting, which is crucial to achieve high Voc.

A-site Cation Engineering for Highly Efficient MAPbI3 Single-Crystal X-ray Detector.

Metal halide perovskites have emerged as a new generation of X-ray detector materials. However, large-sized MAPbI3 single crystals (SCs) still exhibit lower performance than MAPbBr3 SCs in X-ray detection. DFT (density functional theory) simulations suggest the problem could be overcome by alloying large-sized cations at the A site. The alloyed process could notably decrease the electron-phonon coupling strength and increase the material defect formation energy. Accordingly, centimeter-sized alloyed DMAMAPbI3 (DMA=dimethylammonium) and GAMAPbI3 (GA=guanidinium) SCs are obtained. Electrical characterizations confirm the GAMAPbI3 SCs display improved charge collection efficiency. It also exhibits a remarkable reduction of dark current, an important figure of merit for X-ray detectors. With a judiciously designed device architecture, the overall detector performance confirms GAMAPbI3 SCs as one of the most sensitive perovskite X-ray detectors to date.

Spectra stable blue perovskite light-emitting diodes.

Device performance and in particular device stability for blue perovskite light-emitting diodes (PeLEDs) remain considerable challenges for the whole community. In this manuscript, we conceive an approach by tuning the 'A-site' cation composition of perovskites to develop blue-emitters. We herein report a Rubidium-Cesium alloyed, quasi-two-dimensional perovskite and demonstrate its great potential for pure-blue PeLED applications. Composition engineering and in-situ passivation are conducted to further improve the material's emission property and stabilities. Consequently, we get a prominent film photoluminescence quantum yield of around 82% under low excitation density. Encouraged by these findings, we finally achieve a spectra-stable blue PeLED with the peak external quantum efficiency of 1.35% and a half-lifetime of 14.5 min, representing the most efficient and stable pure-blue PeLEDs reported so far. The strategy is also demonstrated to be able to generate efficient perovskite blue emitters and PeLEDs in the whole blue spectral region (from 454 to 492 nm).