Nickel and iron-based metal-organic frameworks for removal of organic and inorganic model contaminants.

Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials in the field of environmental remediation. Ni-MOF and Fe-MOF were chosen for their advantages such as structural robustness and ease of synthesis route. The structure of prepared MOFs was characterized using FE-SEM, XRD, FTIR, and N2 adsorption-desorption. The efficiency of MOFs to remove organic model contaminants (anionic Alizarin Red S (ARS) and cationic malachite green (MG) and inorganic fluoride was studied. Fe-MOF and Ni-MOF adsorbed 67, 88, 6% and 32, 5, and 9% of fluoride, ARS, and MG, respectively. Further study on ARS adsorption by Fe-MOF showed that the removal efficiency was high in a wide range of pH from 3 to 9. Moreover, dye removal was directly increased by adsorbent mass (0.1-0.75 g/L) and decreased by ARS concentration (25-100 mg/L). The pseudo-first-order kinetic model and Langmuir isotherm model with a qmax of 176.68 mg/g described the experimental data well. The separation factor, KL, was in the range of 0-1, which means the adsorption process was favorable. In conclusion, Fe-MOF showed remarkable adsorption of organic and inorganic model contaminants.

Non-carcinogenic risk assessment of exposure to heavy metals in underground water resources in Saraven, Iran: Spatial distribution, monte-carlo simulation, sensitive analysis.

Groundwater aquifers are considered the second most abundant water supply for drinking water all over the world. In Iran, ground waters are commonly employed for drinking water, irrigation, and industrial purposes. Heavy metals (HMs) pose human concerns about the groundwater contamination; these pollutants are recognized to be capable of bio-accumulation, long persistence in the natural environment, and toxic effects. In the present research, the content of HMs: Chromium (Cr), Cadmium (Cd), and Lead (Pb) were detected in 89 water samples collected in 2018 by underground water supplies (active wells) of Saravan city. Hazard Quotient (HQ) and Monte Carlo Simulation approach with 10,000 repetitions were applied to discover the human non-carcinogenic impacts of HMs in four groups of ages (adults, teenagers, children, and infants) of consumers. The concentrations of Cr, Pb, and Cd were in the range of 0.49-20, 0.1 to 58.34, and 0.11-12.8 µg/L, respectively. The mean HQ calculated due to exposure to Pb (0.0018-0.0023), Cr (0.0112-0.0186), and Cd (0.0370-0.0615) were lower than one. The findings of sensitivity analysis revealed that HMs concentration had the most contribution effect on human non-carcinogenic risk analysis in four different exposed populations. This study could assist researchers to perform more comprehensive studies with more samples. Therefore, further research is required for decision-makers to plan proper measurements properly.