Effect of Conformational Diversity on the Bioactivity of µ-Conotoxin PIIIA Disulfide Isomers.

Cyclic µ-conotoxin PIIIA, a potent blocker of skeletal muscle voltage-gated sodium channel NaV1.4, is a 22mer peptide stabilized by three disulfide bonds. Combining electrophysiological measurements with molecular docking and dynamic simulations based on NMR solution structures, we investigated the 15 possible 3-disulfide-bonded isomers of µ-PIIIA to relate their blocking activity at NaV1.4 to their disulfide connectivity. In addition, three µ-PIIIA mutants derived from the native disulfide isomer, in which one of the disulfide bonds was omitted (C4-16, C5-C21, C11-C22), were generated using a targeted protecting group strategy and tested using the aforementioned methods. The 3-disulfide-bonded isomers had a range of different conformational stabilities, with highly unstructured, flexible conformations with low or no channel-blocking activity, while more constrained molecules preserved 30% to 50% of the native isomer's activity. This emphasizes the importance and direct link between correct fold and function. The elimination of one disulfide bond resulted in a significant loss of blocking activity at NaV1.4, highlighting the importance of the 3-disulfide-bonded architecture for µ-PIIIA. µ-PIIIA bioactivity is governed by a subtle interplay between an optimally folded structure resulting from a specific disulfide connectivity and the electrostatic potential of the conformational ensemble.

Insights into the Folding of Disulfide-Rich µ-Conotoxins.

The study of protein conformations using molecular dynamics (MD) simulations has been in place for decades. A major contribution to the structural stability and native conformation of a protein is made by the primary sequence and disulfide bonds formed during the folding process. Here, we investigated µ-conotoxins GIIIA, KIIIA, PIIIA, SIIIA, and SmIIIA as model peptides possessing three disulfide bonds. Their NMR structures were used for MD simulations in a novel approach studying the conformations between the folded and the unfolded states by systematically breaking the distinct disulfide bonds and monitoring the conformational stability of the peptides. As an outcome, the use of a combination of the existing knowledge and results from the simulations to classify the studied peptides within the extreme models of disulfide folding pathways, namely the bovine pancreatic trypsin inhibitor pathway and the hirudin pathway, is demonstrated. Recommendations for the design and synthesis of cysteine-rich peptides with a reduced number of disulfide bonds conclude the study.

Synthesis and Structure Determination of µ-Conotoxin PIIIA Isomers with Different Disulfide Connectivities.

Peptides with a high number of cysteines are usually influenced regarding the three-dimensional structure by their disulfide connectivity. It is thus highly important to avoid undesired disulfide bond formation during peptide synthesis, because it may result in a completely different peptide structure, and consequently altered bioactivity. However, the correct formation of multiple disulfide bonds in a peptide is difficult to obtain by using standard self-folding methods such as conventional buffer oxidation protocols, because several disulfide connectivities can be formed. This protocol represents an advanced strategy required for the targeted synthesis of multiple disulfide-bridged peptides which cannot be synthesized via buffer oxidation in high quality and quantity. The study demonstrates the application of a distinct protecting group strategy for the synthesis of all possible 3-disulfide-bonded peptide isomers of µ-conotoxin PIIIA in a targeted way. The peptides are prepared by Fmoc-based solid phase peptide synthesis using a protecting group strategy for defined disulfide bond formation. The respective pairs of cysteines are protected with trityl (Trt), acetamidomethyl (Acm), and tert-butyl (tBu) protecting groups to make sure that during every oxidation step only the required cysteines are deprotected and linked. In addition to the targeted synthesis, a combination of several analytical methods is used to clarify the correct folding and generation of the desired peptide structures. The comparison of the different 3-disulfide-bonded isomers indicates the importance of accurate determination and knowledge of the disulfide connectivity for the calculation of the three-dimensional structure and for interpretation of the biological activity of the peptide isomers. The analytical characterization includes the exact disulfide bond elucidation via tandem mass spectrometry (MS/MS) analysis which is performed with partially reduced and alkylated derivatives of the intact peptide isomer produced by an adapted protocol. Furthermore, the peptide structures are determined using 2D nuclear magnetic resonance (NMR) experiments and the knowledge obtained from MS/MS analysis.

Deciphering Specificity Determinants for FR900359-Derived Gq α Inhibitors Based on Computational and Structure-Activity Studies.

Direct targeting of intracellular Gα subunits of G protein-coupled receptors by chemical tools is a challenging task in current pharmacological studies and in the development of novel therapeutic approaches. In this study we analyzed novel FR900359-based analogs from natural sources, synthetic cyclic peptides, as well as all so-far known Gq α inhibitors in a comprehensive study to devise a strategy for the elucidation of characteristics that determine interactions with and inhibition of Gq in the specific FR/YM-binding pocket. Using 2D NMR spectroscopy and molecular docking we identified unique features in the macrocyclic structures responsible for binding to the target protein correlating with inhibitory activity. While all novel compounds were devoid of effects on Gi and Gs proteins, no inhibitor surpassed the biological activity of FR. This raises the question of whether depsipeptides such as FR already represent valuable chemical tools for specific inhibition of Gq and, at the same time, are suitable natural lead structures for the development of novel compounds to target Gα subunits other than Gq .

Conformational µ-Conotoxin PIIIA Isomers Revisited: Impact of Cysteine Pairing on Disulfide-Bond Assignment and Structure Elucidation.

Peptides and proteins carrying high numbers of cysteines can adopt various 3D structures depending on their disulfide connectivities. The unambiguous verification of such conformational isomers with more than two disulfide bonds is extremely challenging, and experimental strategies for their unequivocal structural analysis are largely lacking. We synthesized all 15 possible isomers of the 22mer conopeptide µ-PIIIA and applied 2D NMR spectroscopy and MS/MS for the elucidation of its structure. This study provides intriguing insights in how the disulfide connectivity alters the global fold of a toxin. We also show that analysis procedures involving comprehensive combinations of conventional methods are required for the unambiguous assignment of disulfides in cysteine-rich peptides and proteins and that standard compounds are crucially needed for the structural analysis of such complex molecules.

New insights into the mechanism of nickel superoxide degradation from studies of model peptides.

A series of small, catalytically active metallopeptides, which were derived from the nickel superoxide dismutase (NiSOD) active site were employed to study the mechanism of superoxide degradation especially focusing on the role of the axial imidazole ligand. In the literature, there are contradicting propositions about the catalytic importance of the N-terminal histidine. Therefore, we studied the stability and activity of a set of eight NiSOD model peptides, which represent the major model systems discussed in the literature to date, yet differing in their length and their Ni-coordination. UV-Vis-coupled stopped-flow kinetic measurements and mass spectrometry analysis unveiled their high oxidation sensitivity in the presence of oxygen and superoxide resulting into a much faster Ni(II)-peptide degradation for the amine/amide Ni(II) coordination than for the catalytically inactive bis-amidate Ni(II) coordination. With respect to these results we determined the catalytic activities for all NiSOD mimics studied herein, which turned out to be in almost the same range of about 2 × 106 M-1 s-1. From these experiments, we concluded that the amine/amide Ni(II) coordination is clearly the key factor for catalytic activity. Finally, we were able to clarify the role of the N-terminal histidine and to resolve the contradictory literature propositions, reported in previous studies.

CO-independent modification of K+ channels by tricarbonyldichlororuthenium(II) dimer (CORM-2).

Although toxic when inhaled in high concentrations, the gas carbon monoxide (CO) is endogenously produced in mammals, and various beneficial effects are reported. For potential medicinal applications and studying the molecular processes underlying the pharmacological action of CO, so-called CO-releasing molecules (CORMs), such as tricabonyldichlororuthenium(II) dimer (CORM-2), have been developed and widely used. Yet, it is not readily discriminated whether an observed effect of a CORM is caused by the released CO gas, the CORM itself, or any of its intermediate or final breakdown products. Focusing on Ca2+- and voltage-dependent K+ channels (KCa1.1) and voltage-gated K+ channels (Kv1.5, Kv11.1) relevant for cardiac safety pharmacology, we demonstrate that, in most cases, the functional impacts of CORM-2 on these channels are not mediated by CO. Instead, when dissolved in aqueous solutions, CORM-2 has the propensity of forming Ru(CO)2 adducts, preferentially to histidine residues, as demonstrated with synthetic peptides using mass-spectrometry analysis. For KCa1.1 channels we show that H365 and H394 in the cytosolic gating ring structure are affected by CORM-2. For Kv11.1 channels (hERG1) the extracellularly accessible histidines H578 and H587 are CORM-2 targets. The strong CO-independent action of CORM-2 on Kv11.1 and Kv1.5 channels can be completely abolished when CORM-2 is applied in the presence of an excess of free histidine or human serum albumin; cysteine and methionine are further potential targets. Off-site effects similar to those reported here for CORM-2 are found for CORM-3, another ruthenium-based CORM, but are diminished when using iron-based CORM-S1 and absent for manganese-based CORM-EDE1.

Propylene carbonate quantification by its derivative 3,5-diacetyl-1,4-dihydro-2,6-lutidine.

Propylene carbonate (PC) is a non-toxic solvent currently used in various pharmaceutical formulations. Consequently, a simple, cost-effective and most accurate analytical method for the quantification of this optical inert solvent is of major interest. Based on a consecutive three-step reaction 3,5-diacetyl-1,4-dihydro-2,6-lutidine was obtained from PC and used for quantification by either UV and fluorescent detection. Data were compared with results from LC-ESI-MS as a reference method. After using Mandel's test for linearity assessment of the calibration curves, linear fitting was used for LC-ESI-MS and spectrofluorimetry, while a polynomial 3rd order curve fitting was used for spectrophotometry. High intra- and inter-day precision as well as high accuracy were confirmed for all three analytical methods (spectrophotometry, spectrofluorimetry and LC-ESI-MS). The comparison of all three methods was assessed using correlation coefficients and Bland-Altman plots, both showing satisfying results with a high degree of agreement. The new method confirmed its applicability for PC quantification in two formulations, namely a PC-enriched cream and polyester microimplants. This new quantification method for PC is a reliable alternative to highly sophisticated chromatographic methods.

Synthetic strategies for polypeptides and proteins by chemical ligation.

This review focuses on chemical ligation methods for the preparation of oligopeptides and proteins. Chemical ligation is a practical and convenient methodology in peptide and protein synthesis. Longer peptides and proteins can be obtained with high yield in aqueous buffer solutions by coupling unprotected peptide segments even without activation by enzymes or further chemical agents. Several methods and protocols were developed in the past. The potential of the most important approaches of the thioester- and imine-ligation techniques is demonstrated by a broad spectrum of applications. In addition, special features and protocols such as the template-directed ligation, ligation with novel additives or solvent media, microwave-assisted ligation, and the achievements obtained with those are also highlighted herein.

Application of room-temperature aprotic and protic ionic liquids for oxidative folding of cysteine-rich peptides.

The oxidation of the conotoxin µ-SIIIA in different ionic liquids was investigated, and the results were compared with those obtained in [C2 mim][OAc]. Conversion of the reduced precursor into the oxidized product was observed in the protic ILs methyl- and ethylammonium formate (MAF and EAf, respectively), whereas choline dihydrogenphosphate and Ammoeng 110 failed to yield folded peptide. However, the quality and yield of the peptide obtained in MAF and EAF were lower than in the case of the product from [C2 mim][OAc]. Reaction conditions (temperature, water content) also had an impact on peptide conversion. A closer look at the activities of µ-SIIIA versions derived from an up-scaled synthesis in [C2 mim][OAc] revealed a significant loss of the effect on ion channel NaV 1.4 relative to the buffer-oxidized peptide, whereas digestion of either µ-SIIIA product by trypsin was unaffected. This was attributed to adherence of ions from the IL to the peptide, because the disulfide connectivity is basically the same for the differentially oxidized µ-SIIIA versions.

Ionic liquid applications in peptide chemistry: synthesis, purification and analytical characterization processes.

This review aims to provide a comprehensive overview of the recent advances made in the field of ionic liquids in peptide chemistry and peptide analytics.