Hydrophilic molecularly imprinted lysozyme-BiOBr composite with enhanced visible light utilization for selective removal of trace contaminants in water.

The development of high-efficiency molecularly imprinted photocatalysts is still challenging due to the lack of hydrophilic and suitable functional monomers. In this work, the bio-sourced lysozyme was developed as the hydrophilic functional monomer, and Cu-doped BiOBr was used as the photocatalysts, to prepare a novel hydrophilic molecularly imprinted lysozyme-BiOBr composite (BiOBr-Cu/LyzMIP) with enhanced visible light utilization. Lysozyme could form a transparent layer to mitigate the light transmission obstruction caused by the surface imprinting layer, making it an ideal functional monomer. The prepared BiOBr-Cu/LyzMIP possessed red-shifted visible-light absorption edge and minor reduction of light absorbance, indicating the enhanced utilization of visible light. Accordingly, BiOBr-Cu/LyzMIP demonstrated excellent degradation rate (99.4 % in 20 min), exceptional degradation efficiency (0.211 min-1), and superior reusability. Moreover, BiOBr-Cu/LyzMIP exhibited rapid adsorption equilibrium (20 min), good imprinting factor (2.67), and favourable degradation selectivity (>1.75), indicating the good imprinting effect resulting from abundant functional groups of lysozyme. Versatility experiments on different templates suggested that the proposed approach allowed flexibility in selecting a wide range of hazardous contaminants according to practical requirements. The present work expands the application of lysozyme-based composites in the environmental field, and provides a new one-stop pathway for efficient and sustainable treatment of contaminated water.

Photocatalytic CO2 Reduction with Dissolved Carbonates and Near-Zero CO2(aq) by Employing Long-Range Proton Transport.

Photocatalytic CO2 reduction (CO2R) in ∼0 mM CO2(aq) concentration is challenging but is relevant for capturing CO2 and achieving a circular carbon economy. Despite recent advances, the interplay between the CO2 catalytic reduction and the oxidative redox processes that are arranged on photocatalyst surfaces with nanometer-scale distances is less studied. Specifically, mechanistic investigation on interdependent processes, including CO2 adsorption, charge separation, long-range chemical transport (∼100 nm distance), and bicarbonate buffer speciation, involved in photocatalysis is urgently needed. Photocatalytic CO2R in ∼0 mM CO2(aq), which has important applications in integrated carbon capture and utilization (CCU), has rarely been studied. Using 0.1 M KHCO3 (aq) of pH 7 but without continuously bubbling CO2, we achieved ∼0.1% solar-to-fuel conversion efficiency for CO production using Ag@CrOx nanoparticles that are supported on a coating-protected GaInP2 photocatalytic panel. CO is produced at ∼100% selectivity with no detectable H2, even with copious protons co-generated nearby. CO2 flux to the Ag@CrOx CO2R sites enhances CO2 adsorption, probed by in situ Raman spectroscopy. CO is produced with local protonation of dissolved inorganic carbon species in a pH as high as 11.5 when using fast electron donors such as ethanol. Isotopic labeling using KH13CO3 was used to confirm the origin of CO from the bicarbonate solution. We then employed COMSOL Multiphysics modeling to simulate the spatial and temporal pH variation and the local concentrations of bicarbonates and CO2(aq). We found that light-driven CO2R and CO2 reactive transport are mutually dependent, which is important for further understanding and manipulating CO2R activity and selectivity. This study enables direct bicarbonate utilization as the source of CO2, thereby achieving CO2 capture and conversion without purifying and feeding gaseous CO2.

Strategic preparation of porous magnetic molecularly imprinted polymers via a simple and green method for high-performance adsorption and removal of meropenem.

In this study, a facile method has been developed to synthesize a novel type of porous magnetic molecularly imprinted polymers (Fe3O4-MER-MMIPs) for the selective adsorption and removal of meropenem. The Fe3O4-MER-MMIPs, with abundant functional groups and sufficient magnetism for easy separation, are prepared in aqueous solutions. The porous carriers reduce the overall mass of the MMIPs, greatly improving their adsorption capacity per unit mass and optimizing the overall value of the adsorbents. The green preparation conditions, adsorption performance, and physical and chemical properties of Fe3O4-MER-MMIPs have been carefully studied. The developed submicron materials exhibit a homogeneous morphology, satisfactory superparamagnetism (60 emu g-1), large adsorption capacity (11.49 mg g-1), quick adsorption kinetics (40 min), and good practical implementation in human serum and environmental water. Finally, the protocol developed in this work delivers a green and feasible method for synthesizing highly efficient adsorbents for the specific adsorption and removal of other antibiotics as well.

In Situ Identification of Reaction Intermediates and Mechanistic Understandings of Methane Oxidation over Hematite: A Combined Experimental and Theoretical Study.

Effective methane utilization for either clean power generation or value-added chemical production has been a subject of growing attention worldwide for decades, yet challenges persist mostly in relation to methane activation under mild conditions. Here, we report hematite, an earth-abundant material, to be highly effective and thermally stable to catalyze methane combustion at low temperatures (<500 °C) with a low light-off temperature of 230 °C and 100% selectivity to CO2. The reported performance is impressive and comparable to those of precious-metal-based catalysts, with a low apparent activation energy of 17.60 kcal·mol-1. Our theoretical analysis shows that the excellent performance stems from a tetra-iron center with an antiferromagnetically coupled iron dimer on the hematite (110) surface, analogous to that of the methanotroph enzyme methane monooxygenase that activates methane at ambient conditions in nature. Isotopic oxygen tracer experiments support a Mars van Krevelen redox mechanism where CH4 is activated by reaction with a hematite surface oxygen first, followed by a catalytic cycle through a molecular-dioxygen-assisted pathway. Surface studies with in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations reveal the evolution of reaction intermediates from a methoxy CH3-O-Fe, to a bridging bidentate formate b-HCOO-Fe, to a monodentate formate m-HCOO-Fe, before CO2 is eventually formed via a combination of thermal hydrogen-atom transfer (HAT) and proton-coupled electron transfer (PCET) processes. The elucidation of the reaction mechanism and the intermediate evolutionary profile may allow future development of catalytic syntheses of oxygenated products from CH4 in gas-phase heterogeneous catalysis.

Catalytic manganese oxide nanostructures for the reverse water gas shift reaction.

Understanding the fundamental structure-property relationships of nanomaterials is critical for many catalytic applications as they comprise of the catalyst designing principles. Here, we develop efficient synthetic methods to prepare various MnO2 structures and investigate their catalytic performance as applied to the reverse Water Gas Shift (rWGS) reaction. We show that the support-free MnO derived from MnO2 1D, 2D and 3D nanostructures are highly selective (100% CO2 to CO), thermally stable catalysts (850 °C) and differently effective in the rWGS. Up to 50% conversion is observed, with a H2/CO2 feed-in ratio of 1 : 1. From both experiments and DFT calculations, we find the MnO2 morphology plays a critical role in governing the catalytic behaviors since it affects the predominant facets exposed under reaction conditions as well as the intercalation of K+ as a structural building block, substantially affecting the gas-solid interactions. The relative adsorption energy of reactant (CO2) and product (CO), ΔE = Eads(CO2) -Eads(CO), is found to correlate linearly with the catalytic activity, implying a structure-function relationship. The strong correlation found between Eads(CO2) -Eads(CO), or more generally, Eads(R) -Eads(P), and catalytic activity makes ΔE a useful descriptor for characterization of efficient catalysts involving gas-solid interactions beyond the rWGS.