Use of iron mine tailing as fillers to polyethylene.

The iron mine tailings accumulation in dams is an environmental and economic problem. The composite based on high-density polyethylene/iron mine tailing production for the application of wood plastic and some items of domestic plastic industry can be a good alternative to reduce the rejects in the environment. This work presents the influence of the processing methodology in the mechanical, thermal and morphological properties of composites based on the high-density polyethylene/iron mine tailing. Four methodology processing by continuous and/or batch mixing were available. The iron mine tailing particles in the polymer matrix promoted an increase in mechanical strength and thermal stability. Besides, the particles acted as flame retardant. The iron mine tailing materials produced using batch mixing showed more significant modifications in the properties due to the better dispersion of the filler as shown by scanning electron microscopy.

Magnetized manganese oxide nanocomposite for effective decontamination of Cd(II) from wastewaters.

In this study, a composite with magnetic properties has been successfully synthesized by a novel and environmentally friendly route and is applied to Cd(II) adsorption for water decontamination. The quantification of the phases obtained by Rietveld refinement has shown the presence of 84% of Mn3O4 and 16% of Fe3O4. Transmission electron microscopy image shows an aggregate of Mn3O4 nanoparticles without specific orientation and the predominance of octahedral morphology with nanoparticles size estimated around 25-30 nm. The Cd(II) adsorption isotherm is fitted using the Langmuir-Freundlich model. The estimated maximum adsorption capacities of Cd(II) at pH 6 and 7 are similar (0.28 ± 0.02 and 0.31 ± 0.02 mg/m2, respectively). The kinetic results show that the studied system follows the pseudo-second-order model. The Raman results indicate that Cd is being specifically adsorbed by the Mn3O4 in the composite. The hysteresis curve of the composite Mn3O4/Fe3O4 has changed when compared to the pure magnetite; however, the coercive field after the addition of manganese oxide remains unaltered and does not change with a value around 158 Oe. The turbidity tests showed that the magnetic sedimentation was efficient and promising for wastewater treatment in large scale. These materials can be conveniently recovered by magnetic separation, avoiding the filtration steps, which will make easier the solid-liquid separation operation that follows the adsorption process.