Active feedback stabilization of super-efficient microcombs in photonic molecules.

Dissipative Kerr soliton (DKS) frequency combs, when generated within coupled cavities, exhibit exceptional performance concerning controlled initiation and power conversion efficiency. Nevertheless, to fully exploit these enhanced capabilities, it is necessary to maintain the frequency comb in a low-noise state over an extended duration. In this study, we demonstrate the control and stabilization of super-efficient microcombs in a photonic molecule. Our findings demonstrate that there is a direct relation between effective detuning and soliton power, allowing the latter to be used as a setpoint in a feedback control loop. Employing this method, we achieve the stabilization of a highly efficient microcomb indefinitely, paving the way for its practical deployment in optical communications and dual-comb spectroscopy applications.

Surpassing the nonlinear conversion efficiency of soliton microcombs.

Laser frequency combs are enabling some of the most exciting scientific endeavours in the twenty-first century, ranging from the development of optical clocks to the calibration of the astronomical spectrographs used for discovering Earth-like exoplanets. Dissipative Kerr solitons generated in microresonators currently offer the prospect of attaining frequency combs in miniaturized systems by capitalizing on advances in photonic integration. Most of the applications based on soliton microcombs rely on tuning a continuous-wave laser into a longitudinal mode of a microresonator engineered to display anomalous dispersion. In this configuration, however, nonlinear physics precludes one from attaining dissipative Kerr solitons with high power conversion efficiency, with typical comb powers amounting to ~1% of the available laser power. Here we demonstrate that this fundamental limitation can be overcome by inducing a controllable frequency shift to a selected cavity resonance. Experimentally, we realize this shift using two linearly coupled anomalous-dispersion microresonators, resulting in a coherent dissipative Kerr soliton with a conversion efficiency exceeding 50% and excellent line spacing stability. We describe the soliton dynamics in this configuration and find vastly modified characteristics. By optimizing the microcomb power available on-chip, these results facilitate the practical implementation of a scalable integrated photonic architecture for energy-efficient applications.

Thermorefractive noise reduction of photonic molecule frequency combs using an all-optical servo loop.

Phase and frequency noise originating from thermal fluctuations is commonly a limiting factor in integrated photonic cavities. To reduce this noise, one may drive a secondary "servo/cooling" laser into the blue side of a cavity resonance. Temperature fluctuations which shift the resonance will then change the amount of servo/cooling laser power absorbed by the device as the laser moves relatively out of or into the resonance, and thereby effectively compensate for the fluctuation. In this paper, we use a low noise laser to demonstrate this principle for the first time in a frequency comb generated from a normal dispersion photonic molecule micro-resonator. Significantly, this configuration can be used with the servo/cooling laser power above the usual nonlinearity threshold since resonances with normal dispersion are available. We report a 50 % reduction in frequency noise of the comb lines in the frequency range of 10 kHz to 1 MHz and investigate the effect of the secondary servo/cooling noise on the comb.

Multilayer integration in silicon nitride: decoupling linear and nonlinear functionalities for ultralow loss photonic integrated systems.

Silicon nitride is an excellent material platform for its extremely low loss in a large wavelength range, which makes it ideal for the linear processing of optical signals on a chip. Moreover, the Kerr nonlinearity and the lack of two-photon absorption in the near infrared enable efficient nonlinear optics, e.g., frequency comb generation. However, linear and nonlinear operations require distinct engineering of the waveguide core geometry, resulting in a tradeoff between optical loss and single-mode behavior, which hinders the development of high-performance, ultralow-loss linear processing blocks on a single layer. Here, we demonstrate a dual-layer photonic integration approach with two silicon-nitride platforms exhibiting ultralow optical losses, i.e., a few dB/m, and individually optimized to perform either nonlinear or linear processing tasks. We demonstrate the functionality of this approach by integrating a power-efficient microcomb with an arrayed waveguide grating demultiplexer to filter a few frequency comb lines in the same monolithically integrated chip. This approach can significantly improve the integration of linear and nonlinear optical elements on a chip and opens the way to the development of fully integrated processing of Kerr nonlinear sources.

Hyperparametric Oscillation via Bound States in the Continuum.

Optical hyperparametric oscillation based on the third-order nonlinearity is one of the most significant mechanisms to generate coherent electromagnetic radiation and produce quantum states of light. Advances in dispersion-engineered high-Q microresonators allow for generating signal waves far from the pump and decrease the oscillation power threshold to submilliwatt levels. However, the pump-to-signal conversion efficiency and absolute signal power are low, fundamentally limited by parasitic mode competition and attainable cavity intrinsic Q to coupling Q ratio, i.e., Q_{i}/Q_{c}. Here, we use Friedrich-Wintgen bound states in the continuum (BICs) to overcome the physical challenges in an integrated microresonator-waveguide system. As a result, on-chip coherent hyperparametric oscillation is generated in BICs with unprecedented conversion efficiency and absolute signal power. This work not only opens a path to generate high-power and efficient continuous-wave electromagnetic radiation in Kerr nonlinear media but also enhances the understanding of a microresonator-waveguide system-an elementary unit of modern photonics.

Widely tunable narrow linewidth laser source based on photonic molecule microcombs and optical injection locking.

We demonstrate a method to generate a widely and arbitrarily tunable laser source with very narrow linewidth. By seeding a coupled-cavity microcomb with a highly coherent single-frequency laser and using injection locking of a Fabry-Perot laser to select a single output comb tone, a high power, high side mode suppression ratio output wave is obtained. The system is demonstrated across 1530 -1585 nm with a linewidth below 8 kHz, having 5 dBm output power and sidemode suppression of at least 60 dB. Prospects of extending the performance are also discussed.

Differential phase reconstruction of microcombs.

Measuring microcombs in amplitude and phase provides unique insight into the nonlinear cavity dynamics, but spectral phase measurements are experimentally challenging. Here, we report a linear heterodyne technique assisted by electro-optic downconversion that enables differential phase measurement of such spectra with unprecedented sensitivity (-50 dBm) and bandwidth coverage (>110 nm in the telecommunications range). We validate the technique with a series of measurements, including single-cavity and photonic molecule microcombs.

Optical linewidth of soliton microcombs.

Soliton microcombs provide a versatile platform for realizing fundamental studies and technological applications. To be utilized as frequency rulers for precision metrology, soliton microcombs must display broadband phase coherence, a parameter characterized by the optical phase or frequency noise of the comb lines and their corresponding optical linewidths. Here, we analyse the optical phase-noise dynamics in soliton microcombs generated in silicon nitride high-Q microresonators and show that, because of the Raman self-frequency shift or dispersive-wave recoil, the Lorentzian linewidth of some of the comb lines can, surprisingly, be narrower than that of the pump laser. This work elucidates information about the physical limits in phase coherence of soliton microcombs and illustrates a new strategy for the generation of spectrally coherent light on chip.

Frequency-comb-calibrated swept-wavelength interferometry.

Lasers are often used to characterize samples in a non-destructive manner and retrieve sensing information transduced in changes in amplitude and phase. In swept wavelength interferometry, a wavelength-tunable laser is used to measure the complex response (i.e. in amplitude and phase) of an optical sample. This technique leverages continuous advances in rapidly tunable lasers and is widely used for sensing, bioimaging and testing of photonic integrated components. However, the tunable laser requires an additional calibration step because, in practice, it does not tune at a constant rate. In this work, we use a self-referenced frequency comb as an optical ruler to calibrate the laser used in swept-wavelength interferometry and optical frequency domain reflectometry. This allows for realizing high-resolution complex spectroscopy over a bandwidth exceeding 10 THz. We apply the technique to the characterization of low-loss integrated photonic devices and demonstrate that the phase information can disentangle intrinsic from coupling losses in the characterization of high-Q microresonators. We also demonstrate the technique in reflection mode, where it can resolve attenuation and dispersion characteristics in integrated long spiral waveguides.

High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators.

Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power-conversion efficiency. Here, we report the first coherent-transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB, while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.