RESUMO
This study presents a sustainable approach to activated carbon production from olive stones in comparison to commercial ones, using various activating agents such as H3PO4, KOH, and ZnCl2, for enhancing the adsorption properties and versatile adsorption capability to remove a range of pollutants including copper ion, methylene blue, and 2,4-Dichlorophenoxyacetic acid from aqueous solutions. The performances of activated carbons across varying conditions such as pollutant concentrations, temperatures, pH levels, and adsorbent amounts were tested. Increased initial pollutant concentrations correlated with higher adsorption capacities. Maximum adsorption capacities were achieved at pH levels of 5, 10, and 2 for Cu, MB, and 2,4-D, respectively. For KOSAC, Cu removal rose from 27 % to 52 %, for ZOSAC, MB removal increased from 39 % to 65 %, and for ZOSAC, 2,4-D removal surged from 33 % to 99 % at varying adsorbent amounts. Model validation was carried out utilizing the kinetic models (PFO, PSO) and isotherm models (Langmuir, Redlich-Peterson). The PFO kinetic model and Langmuir isotherm model proved more suitability for Cu adsorption, whereas PFO and PSO kinetic models, along with Redlich-Peterson isotherm models, were more prominent for MB and 2,4-D adsorption. Thermodynamic analysis revealed that the adsorption of Cu and 2,4-D was exothermic, while MB adsorption was endothermic. By optimization of experimental conditions, the maximum adsorption capacities were attained at 30.34 °C and 297.65 mg L-1 for KOSAC-Cu, 48.62 °C and 269.37 mg L-1 for ZOSAC-MB, and 30.31 °C and 299.02 mg L-1 for ZOSAC-2,4-D sorption. This research highlights ZOSAC's potential as a cost-effective, eco-friendly solution for water treatment, contributing to environmental sustainability and economical feasibility.
