Startup process, safety and risk assessment of biomass gasification for off-grid rural electrification.

Biomass gasification has significantly advanced in terms of performance and is increasingly used in rural off-grid electricity applications. The downdraft gasifier is primarily used in biomass gasification applications, in which it functions as a reactor into which biomass and gasifying air are introduced to generate producer gas that is then used in an engine generator to produce electricity. However, the safety and stability of biomass gasification remain challenging and depend on several factors, such as the startup heating process, which can affect risks of fire, explosion, and toxic gas emissions. As the biomass gasification is associated with high temperatures and demands safety measures, its startup process should follow a rigorous procedure that ensures reliable operation and minimizes the risk of hazard issues. This study presents a gasifier startup heating process based on a proposed safety protocols hazard analysis. The study indicates that the heating temperature in startup processes has been identified as a critical factor due to its role in impacting safety. The findings indicate that the biomass gasification process has significant risks, including the potential for fire, explosion, and release of environmental emissions via multiple pathways. The methods proposed here could lead to reduced risk from the abovementioned issues.

Effects of different treatments of manure on mitigating methane emissions during storage and preserving the methane potential for anaerobic digestion.

Current agricultural practices in regards to storage of manure come with a significant GHG contribution, due, to a big extent, to CH4 emissions. For example, in Denmark, the agricultural sector is responsible for about 11.1 metric tons of CO2 equivalents; only about 0.2 metric tons come directly from CO2, while 6.0 tons come from CH4. The present study aims at evaluating and comparing two methods based on their effect on suppressing CH4 emissions during storage as well as on preserving and enhancing CH4 yield in a subsequent anaerobic digestion step: the commonly applied acidification with H2SO4 as acidifying agent and thermal treatment at the mild temperatures of 70 and 90 °C (pasteurization). Although both treatments effectively suppressed CH4 emissions during storage, they exhibited a significant difference in preserving and/or enhancing the CH4 potential of manure. Specifically, thermal treatment resulted in 16-35% enhancement of CH4 potential, while acidification resulted in decreasing the CH4 yield by 6-23% compared to non-treated manure. Further investigation showed that storage itself positively affected the CH4 potential of treated manure in a subsequent anaerobic digestion step; this was attributed to microbial activity other than biomethanation during storage. In overall and based on the results obtained regarding suppression of CH4 emissions during storage as well as CH4 potential enhancement, pasteurization at the temperatures tested is a promising alternative to the broadly applied acidification of manure.

Low temperature circulating fluidized bed gasification and co-gasification of municipal sewage sludge. Part 1: Process performance and gas product characterization.

Results from five experimental campaigns with Low Temperature Circulating Fluidized Bed (LT-CFB) gasification of straw and/or municipal sewage sludge (MSS) from three different Danish municipal waste water treatment plants in pilot and demonstration scale are analyzed and compared. The gasification process is characterized with respect to process stability, process performance and gas product characteristics. All experimental campaigns were conducted at maximum temperatures below 750°C, with air equivalence ratios around 0.12 and with pure silica sand as start-up bed material. A total of 8600kg of MSS dry matter was gasified during 133h of operation. The average thermal loads during the five experiments were 62-100% of nominal capacity. The short term stability of all campaigns was excellent, but gasification of dry MSS lead to substantial accumulation of coarse and rigid, but un-sintered, ash particles in the system. Co-gasification of MSS with sufficient amounts of cereal straw was found to be an effective way to mitigate these issues as well as eliminate thermal MSS drying requirements. Characterization of gas products and process performance showed that even though gas composition varied substantially, hot gas efficiencies of around 90% could be achieved for all MSS fuel types.