The effect of Zostera noltei recolonization on the sediment mercury vertical profiles of a recovering coastal lagoon.

Mercury's extreme toxicity and persistence in the environment justifies a thorough evaluation of its dynamics in ecosystems. Aveiro Lagoon (Portugal) was for decades subject to mercury effluent discharges. A Nature-based Solution (NbS) involving Zostera noltei re-colonization is being tested as an active ecosystem restoration measure. To study the effect of Zostera noltei on the sediment contaminant biogeochemistry, seasonal (summer/winter) sediment, interstitial water and labile mercury vertical profiles were made in vegetated (Transplanted and Natural seagrass meadows) and non-vegetated sites (Bare-bottom area). While no significant differences (p > 0.05) were observed in the sedimentary phase, Zostera noltei presence reduced the reactive/labile mercury concentrations in the top sediment layers by up to 40% when compared to non-vegetated sediment, regardless of season. No differences were found between vegetated meadows, highlighting the fast recovery of the contaminant regulation ecosystem function provided by the plants after re-colonization and its potential for the rehabilitation of historically contaminated ecosystems.

Zostera noltei response to transplantation into historically Hg-contaminated sediments (A mesocosm experiment): Growth, bioaccumulation and photosynthetic performance.

The present study aimed to evaluate the effectiveness of seagrass recolonization as a nature-based solution for the recovery of a coastal area historically contaminated by mercury (Laranjo Bay, Ria de Aveiro, Portugal). A mesocosm approach was employed to assess the resistance of Zostera noltei to transplantation into contaminated sediments collected in-situ (0.5-20 mg kg-1 Hg). At each sampling time (15, 30, 60, 120 and 210 days), the resistance of transplanted Z. noltei was evaluated through growth parameters (biomass and coverage area), photosynthetic performance and elemental composition. Although some significant differences (p ≤ 0.05) were observed between treatments, essentially associated with the elemental composition of plant tissues, the most relevant variations were associated with seasonality. Overall, plants were found to not be affected by sediment contamination, under the tested concentrations, suggesting that recolonization with Z. noltei can be an effective restoration strategy for historically contaminated coastal areas.

Laser-assisted production of HAp-coated zirconia structured surfaces for biomedical applications.

OBJECTIVES: The aim of this study was to develop a novel design for implants surface functionalization through the production of HAp-coated zirconia structured surfaces by means of hybrid laser technique. The HAp-rich structured surfaces were designed to avoid hydroxyapatite (HAp) coating detachment from the zirconia surface during implant insertion, thus guaranteeing an effective osseointegration. MATERIALS AND METHODS: The functionalization process of zirconia surface started by creating micro-textures using a Nd:YAG laser and subsequent deposition of a HAp coating on the designated locations by dip-coating process. Afterwards, a CO2 laser was used to sinter the HAp coating. The potential of the HAp-coated zirconia structured surfaces was inspected concerning HAp bioactivity preservation, surface wettability, HAp coating adhesion to the textured surfaces and mechanical resistance of zirconia, as assessed by different approaches. RESULTS: The functionalized surfaces exhibited a superhydrophilic behavior (2.30 ± 0.81°) and the remaining results showed that through the hybrid strategy, it is possible to maintain the HAp bioactivity as well as promote a strong adhesion of HAp coating to the textured surfaces even after high energy ultrasonic cavitation tests and friction tests against bovine bone. It was also verified that the flexural strength of zirconia (503 ± 24 MPa) fulfills the strict requirements of the ISO 13356:2008 standard and as such is expectable to be enough for biomedical applications. SIGNIFICANCE: The promising results of this study indicate that the proposed surface design can open the window for manufacturing zirconia-based implants with improved bioactivity required for an effective osseointegration as it avoids the coating detachment problem during the implant insertion.

Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 osteoblast-like cells.

Laser texturing is a technique that has been increasingly explored for the surface modification of several materials on different applications. Laser texturing can be combined with conventional coating techniques to functionalize surfaces with bioactive properties, stimulating cell differentiation and adhesion. This study focuses on the cell adhesion of laser-sintered coatings of hydroxyapatite (HAp) and 45S5 bioactive glass (45S5 BG) on zirconia textured surfaces using MC3T3-E1 cells. For this purpose, zirconia surfaces were micro-textured via laser and then coated with HAp and 45S5 BG glass via dip coating. Afterwards, the bioactive coatings were laser sintered, and a reference group of samples was conventionally sintering. The cell adhesion characterisation was achieved by cell viability performing live/dead analysis using fluorescence stains and by SEM observations for a qualitative analysis of cell adhesion. The in vitro results showed that a squared textured pattern with 100µm width grooves functionalized with a bioactive coating presented an increase of 90% of cell viability compared to flat surfaces after 48h of incubation. The functionalized laser sintered coatings do not present significant differences in cell viability when compared to conventionally sintered coatings. Therefore, the results reveal that laser sintering of HAp and 45S5 BG coatings is a fast and attractive coating technique.

Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering.

The present study aims at developing a computational framework with experimental validation to determine the mechanical properties of zirconia foams for bone tissue engineering. A micro-CT based finite element model that allows characterizing the mechanical property of such cellular structures is developed. Micro-CT images are filtered to vanish noises and smooth boundaries before constructing 3D zirconia foams using an adaptive Body-Centered Cubic background lattice. In addition to micro-CT images, the local material property at the scaffold struts is measured using a micro-indentation test, which shows a considerable difference with that of common zirconia owing to the manufacturing process. The computational model also takes the plastic deformation of material into account employing the Voce law, a nonlinear isotropic hardening law, as well as Von-mises yield criterion. Zirconia foams with different pore sizes are manufactured using the replica method and their mechanical properties determined experimentally. Such experimental outcomes are to validate and demonstrate the capability of the developed model, which can be used for pre-operational evaluations and preclinical tests of zirconia scaffolds. The stress magnitude and distribution within the scaffold as well as plastic strains and flow stress of the zirconia scaffold are computed and analysed. Using the proposed approach, a deep insight into the association of macroscopic behaviour of the scaffold to microscopic features, e.g. strut waviness, Plateau border, thickness variation of cells, irregularity, microstructural variability, imperfections and strut's material property associated with to the manufacturing procedure, can be gained.

Sliding behavior of zirconia porous implant surfaces against bone.

Different zirconia porous layers were produced on zirconia dense zirconia substrates by slip casting using powder with different mean sizes: 40 µm (Z40), 70 µm (Z70), and 100 µm (Z100). The dynamic and static coefficients of friction against bovine femoral bone, mimicking the implantation process, were conducted using a ball-on-flat reciprocating sliding tribometer under 3 N of normal load. Additionally, the porous layers were assessed with regard to their low temperature degradation (aging). Results revealed that the porous layers were able to keep their integrity during the sliding testes against bone, with no zirconia particles being transferred to the bone. Results did not show significant differences (p > 0.05) in kinetic and static COF values for Z40, Z70, Z100, and GRAD specimens, ranging from 0.53 to 0.77 and 0.65 to 0.90, respectively. The aging tests revealed that all surfaces were prone to low temperature degradation (~49% of monoclinic content after 18 h). In conclusion, the cohesive integrity of the layers and relatively high COF observed reveled that zirconia porous layers may be considered for replacing the current implant surfaces, and are expected to improve their primary stability. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1113-1121, 2019.

Biomechanical simulation of temporomandibular joint replacement (TMJR) devices: a scoping review of the finite element method.

The aim of this study was to perform a literature review on the use of finite element modeling (FEM) for the evaluation of the biomechanical behavior of temporomandibular joint replacement (TMJR) devices. An electronic search of online medical and scientific literature database was conducted using selected search terms. The search identified 307 studies, of which 19 were considered relevant to this study. Of the 19 selected studies, 10 (52.6%) investigated the influence of geometry and fixation methods, while two (10.5%) evaluated the behavior of artificial condyle-fossa structures. The TMJR devices assessed in these studies included TMJ Inc. (aka Christensen; 63.2%), Zimmer Biomet (15.7%), Stryker (10.5%), and a theoretical intramedullary condylar component (5.3%); 26.3% of the studies evaluated custom TMJR devices. Such studies provided important data on the distribution of strain and stress through TMJR structural components and surrounding bone by using different software systems and methods. The mean stress values were lower on a custom TMJR condyle-ramus component and the supporting bone than on the stock device. FEM proved to be an accurate and valuable biomechanical simulation tool for studying the current TMJR devices and should be considered a useful tool for the improvement and development of future joint replacement devices.

Can degradation products released from dental implants affect peri-implant tissues?

This study aimed to assess the literature available on the effects, on peri-implant tissues, of degradation products released from dental implants as a consequence of therapeutic treatment for peri-implantitis and/or of wear-corrosion of titanium. A literature review of the PubMed medline database was performed up to December 31, 2016. The following search terms were used: "titanium wear and dental implant"; "titanium corrosion and dental implant"; "bio-tribocorrosion"; "peri-implantitis"; "treatment of peri-implantitis"; "titanium particles release and dental implant"; and "titanium ion release and dental implant". The keywords were applied to the database in different combinations without limits of time period or type of work. In addition, the reference lists of relevant articles were searched for further studies. Seventy-nine relevant scientific articles on the topic were retrieved. The results showed that pro-inflammatory cytokines, infiltration of inflammatory response cells and activation of the osteoclasts activity are stimulated in peri-implant tissues in the presence of metal particles and ions. Moreover, degenerative changes were reported in macrophages and neutrophils that phagocytosed titanium microparticles, and mutations occurred in human cells cultured in medium containing titanium-based nanoparticles. Debris released from the degradation of dental implants has cytotoxic and genotoxic potential for peri-implant tissues. Thus, the amount and physicochemical properties of the degradation products determine the magnitude of the detrimental effect on peri-implant tissues.

Synergistic interactions between corrosion and wear at titanium-based dental implant connections: A scoping review.

Two-piece implant systems are mainly used in oral implantology involving an osseointegrated implant connected to an abutment, which supports prosthetic structures. It is well documented that the presence of microgaps, biofilms and oral fluids at the implant-abutment connection can cause mechanical and biological complications. The aim of this review paper was to report the degradation at the implant-abutment connection by wear and corrosion processes taking place in the oral cavity. Most of the retrieved studies evaluated the wear and corrosion (tribocorrosion) of titanium-based materials used for implants and abutments in artificial saliva. Electrochemical and wear tests together with microscopic techniques were applied to validate the tribocorrosion behavior of the surfaces. A few studies inspected the wear on the inner surfaces of the implant connection as a result of fatigue or removal of abutments. The studies reported increased microgaps after fatigue tests. In addition, data suggest that micromovements occurring at the contacting surfaces can increase the wear of the inner surfaces of the connection. Biofilms and/or glycoproteins act as lubricants, although they can also amplify the corrosion of the surfaces. Consequently, loosening of the implant-abutment connection can take place during mastication. In addition, wear and corrosion debris such as ions and micro- and nanoparticles released into the surrounding tissues can stimulate peri-implant inflammation that can lead to pathologic bone resorption.

Finite element analysis of stress extent at peri-implant bone surrounding external hexagon or Morse taper implants.

PURPOSE: The purpose of the present study was to evaluate the distribution of stresses and consequent bone volume affected surrounding external hexagon or Morse taper dental implant systems by finite element analysis. MATERIAL AND METHODS: Two different dental implant-abutment designs were assessed: external hexagon or Morse taper joints. A mandibular bone model obtained from a computed tomography scan was used. The implant-abutment systems were axially or obliquely (45°) loaded on 150 N relatively to the central axis of the implant. The von Mises stresses were analysed in terms of magnitude and volume of affected surrounding bone. RESULTS: The von Mises equivalent values found on the cortical bone were higher than that recorded on the trabecular bone. Additionally, the bone volume associated with high stress values was higher in cortical and trabecular bone for oblique loading compared to axial loading. The values of von Mises equivalent stress around Morse taper implant-abutment system were lower on both axial and oblique loads than those recorded for external hexagon implant-abutment systems. CONCLUSIONS: Morse taper implant joints revealed a proper biomechanical behavior when compared to external hexagon systems concerning a significant volume of surrounding peri-implant bone subjected to lower stresses values.

Inhibition of multi-species oral biofilm by bromide doped bioactive glass.

Bioactive glass is an attractive biomaterial that has shown excellent osteogenic and angiogenic effects for oral bone repairing procedures. However, anti-biofilm potential related to such biomaterial has not been completely validated, mainly against multi-species biofilms involved in early tissue infections. The aim of the present study was to evaluate the anti-biofilm effect of 58 S bioactive glass embedding calcium bromide compounds at different concentrations. Bioactive glass free or containing 5, or 10 wt % CaBr2 was synthesized by alkali sol-gel method and then characterized by physco-chemical analyses and scanning electron microscopy (SEM). Then, samples were tested by microbiological assays using optical density, real time q-PCR, and SEM. Bioactive glass particles showed accurate chemical composition and an angular shape with a bimodal size distribution ranging from 0.6 to 110 µm. The mean particle size was around 29 µm. Anti-biofilm effect was recorded for 5 wt % CaBr2 -doped bioactive glass against S. mitis, V. parvula, P. gingivais, S. gordoni, A. viscosus, F, nucleatum, P. gingivais. F. nucleatum, and P. gingivalis. Such species are involved in the biofilm structure related to infections on hard and soft tissues in the oral cavity. The incorporation of calcium bromide into bioactive glass can be a strategy to enhance the anti-biofilm potential of bioactive glasses for bone healing and infection treatment. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1994-2003, 2017.

Processing and strengthening of 58S bioactive glass-infiltrated titania scaffolds.

In this work, TiO2 ceramic scaffolds were fabricated by the replica method using polyurethane (PU) sponges. Suspensions with high solid content were used to achieve scaffolds with improved mechanical behavior. TiO2 ceramic suspensions were optimized by rheological studies using different additives. It was found that the composition with 0.5 wt % Darvan enhanced the covering of the sponge struts. PU sponges of 45 to 80 ppi (pore per inch) were well coated without clogging pores. A thermal treatment with varying holding times, temperatures and heating rates was adjusted. The influence of different pore sizes on mechanical strength was evaluated. It was possible to obtain TiO2 scaffolds with 90% porosity and high pore interconnectivity, having compressive strength exceeding 0.6 MPa. TiO2 scaffolds were filled up with a 58S bioactive glass suspension to impart bioactive character to the scaffolds. These hybrid structures presented mechanical strengthening of about 26-213% depending on their sponge porosity. The prediction for cells viability via zeta potential measures indicated that this hybrid material is very promising for scaffold application with -19 to -25 mV between pH of 7.35-7.45. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 590-600, 2017.

[Surgery for soft-tissue sarcomas of the limbs and trunk wall]. / Chirurgie des sarcomes des tissus mous des membres et de la paroi du tronc.

Soft-tissue sarcoma of the limbs or the trunk wall determine a heterogeneous group of tumours that tends to receive a more individualized approach. The surgeon in charge with soft-tissue sarcoma has to be familiar with these tumours in order to deliver an adequate treatment. Most important is the initial diagnostic procedure, comprising imaging with MRI, a core needle biopsy, and in France, referral to a centre of expertise within the clinical network NETSARC. Prior to surgery, a multidisciplinary conference determines its moment and the extent of surgical resection within the frame of a multidisciplinary approach, and also plans reconstructive surgery, when needed. A standardized operative report summarizes items necessary to describe the resection quality (i.e. tumour seen, tumour infiltrated?). In multidisciplinary staff meetings, they are compared to margins measured by the pathologist on the operative specimen. Hence, resection quality is determined collegially and defined by resection type R (R0, R1, R2) as a qualitative result. The quality of resection directly determines the 5-year risk of local recurrence, estimated between 10 and 20% in specialized centres, with the objective to attain 10%. Early rehabilitation favours better functional outcome. The surgeon's experience with soft-tissue sarcoma, as part of a multidisciplinary treatment, is key in achieving the best adequacy between oncological resection and favourable functional outcome. In France, a specific university course for soft-tissue sarcoma will be set-up.

Shear bond strength of veneering porcelain to zirconia: Effect of surface treatment by CNC-milling and composite layer deposition on zirconia.

OBJECTIVES: The purpose of this study was to evaluate the shear bond strength of veneering feldspathic porcelain to zirconia substrates modified by CNC-milling process or by coating zirconia with a composite interlayer. METHODS: Four types of zirconia-porcelain interface configurations were tested: RZ - porcelain bonded to rough zirconia substrate (n=16); PZ - porcelain bonded to zirconia substrate with surface holes (n=16); RZI - application of a composite interlayer between the veneering porcelain and the rough zirconia substrate (n=16); PZI - application of a composite interlayer between the porcelain and the zirconia substrate treated by CNC-milling (n=16). The composite interlayer was composed of zirconia particles reinforced porcelain (30%, vol%). The mechanical properties of the ceramic composite have been determined. The shear bond strength test was performed at 0.5mm/min using a universal testing machine. The interfaces of fractured and untested specimens were examined by FEG-SEM/EDS. Data was analyzed with Shapiro-Wilk test to test the assumption of normality. The one-way ANOVA followed by Tukey HSD multiple comparison test was used to compare shear bond strength results (α=0.05). RESULTS: The shear bond strength of PZ (100±15MPa) and RZI (96±11MPa) specimens were higher than that recorded for RZ (control group) specimens (89±15MPa), although not significantly (p>0.05). The highest shear bond strength values were recorded for PZI specimens (138±19MPa), yielding a significant improvement of 55% relative to RZ specimens (p<0.05). SIGNIFICANCE: This study shows that it is possible to highly enhance the zirconia-porcelain bond strength - even by ~55% - by combining surface holes in zirconia frameworks and the application of a proper ceramic composite interlayer.

Advantages and limitations of chemical extraction tests to predict mercury soil-plant transfer in soil risk evaluations.

In this study, we compared the size of the mobile Hg pool in soil to those obtained by extractions using 2 M HNO3, 5 M HNO3, and 2 M HCl. This was done to evaluate their suitability to be used as proxies in view of Hg uptake by ryegrass. Total levels of Hg in soil ranged from 0.66 to 70 mg kg(-1) (median 17 mg kg(-1)), and concentrations of Hg extracted increased in the order: mobile Hg < 2 M HNO3 < 5 M HNO3 < 2 M HCl. The percentage of Hg extracted relative to total Hg in soil varied from 0.13 to 0.79 % (for the mobile pool) to 4.8-82 % (for 2 M HCl). Levels of Hg in ryegrass ranged from 0.060 to 36 mg kg(-1) (median 0.65 mg kg(-1), in roots) and from 0.040 to 5.4 mg kg(-1) (median 0.34 mg kg(-1), in shoots). Although results from the 2 M HNO3 extraction appeared to the most comparable to the actual total Hg levels measured in plants, the 2 M HCl extraction better expressed the variation in plant pools. In general, soil tests explained between 66 and 86 % of the variability of Hg contents in ryegrass shoots. Results indicated that all methods tested here can be used to estimate the plant total Hg pool at contaminated areas and can be used in first tier soil risk evaluations. This study also indicates that a relevant part of Hg in plants is from deposition of soil particles and that splashing of soil can be more significant for plant contamination than actual uptake processes. Graphical Abstract Illustration of potential mercury soil-plant transfer routes.

Comparison between PEEK and Ti6Al4V concerning micro-scale abrasion wear on dental applications.

In the oral cavity, abrasive wear is predictable at exposed tooth or restorative surfaces, during mastication and tooth brushing. Also, wear can occur at contacting surfaces between the Ti-based prosthetic structures and implants in presence of abrasive compounds from food or toothpaste. Thus, the aim of this work was to compare the abrasive wear resistance of PEEK and Ti6Al4V on three-body abrasion related to different hydrated silica content and loads. Surfaces of Ti6Al4V or PEEK cylinders (8mm diameter and 4mm height) were wet ground on SiC papers and then polished with 1µm diamond paste. After that, surfaces were ultrasonically cleaned in propyl alcohol for 15min and then in distilled water for 10min. Micro-scale abrasion tests were performed at 60rpm and on different normal loads (0.4, 0.8 or 1.2N) after 600 ball revolutions using suspensions with different weight contents of hydrated silica. After abrasive tests, wear scars on flat samples were measured to quantify the wear volume and characterized by scanning electron microscope (SEM) to identify the dominant wear mechanisms. Results showed a higher volume loss rate on PEEK than that recorded on Ti6Al4V,, when subjected to three-body abrasion tests involving hydrated silica suspensions. An increase in volume loss was noted on both tested materials when the abrasive content or load was increased. PEEK was characterized by less wear resistance than that on Ti6Al4V after micro-scale abrasion wear in contact with hydrated silica particles, as commonly found in toothpastes.

Finite element analysis of the residual thermal stresses on functionally gradated dental restorations.

The aim of this work was to study, using the finite element method (FEM), the distribution of thermal residual stresses arising in metal-ceramic dental restorations after cooling from the processing temperature. Three different interface configurations were studied: with conventional sharp transition; one with a 50% metal-50% ceramic interlayer; and one with a compositionally functionally gradated material (FGM) interlayer. The FE analysis was performed based on experimental data obtained from Dynamic Mechanical Analysis (DMA) and Dilatometry (DIL) studies of the monolithic materials and metal/ceramic composites. Results have shown significant benefits of using the 50% metal-50% ceramic interlayer and the FGM interlayer over the conventional sharp transition interface configuration in reduction of the thermal residual stress and improvement of stress profiles. Maximum stresses magnitudes were reduced by 10% for the crowns with 50% metal-50% ceramic interlayer and by 20% with FGM interlayer. The reduction in stress magnitude and smoothness of the stress distribution profile due to the gradated architectures might explain the improved behavior of these novel dental restorative systems relative to the conventional one, demonstrated by in-vitro studies already reported in literature.

Oral bioaccessibility and human exposure to anthropogenic and geogenic mercury in urban, industrial and mining areas.

The objective of this study was to characterize the link between bioaccessibility and fractionation of mercury (Hg) in soils and to provide insight into human exposure to Hg due to inhalation of airborne soil particles and hand-to-mouth ingestion of Hg-bearing soil. Mercury in soils from mining, urban and industrial areas was fractionated in organometallic forms; mobile; semi-mobile; and non-mobile forms as well as HCl-extractable Hg. The in vitro bioaccessibility of Hg was obtained by extracting soils with (1) a simulated human gastric fluid (pH1.5), and (2) a simulated human lung fluid (pH7.4). Total soil Hg concentrations ranged from 0.72 to 1.8 mg kg(-1) (urban areas), 0.28 to 94 mg kg(-1) (industrial area) and 0.92 to 37 mg kg(-1) (mining areas). Both organometallic Hg as well as 0.1M HCl extractable Hg were lower (<0.5% of total Hg) than Hg extracted by gastric fluid (up to 1.8% of total Hg) and lung fluid (up to 12% of total Hg). In addition, Hg extracted by lung fluid was significantly higher in urban and industrial soils (average 5.0-6.6% of total Hg) compared to mining soils. Such differences were related to levels of mobile Hg species in urban and industrial soils compared to mining soils. These results strengthen the need to measure site-specific Hg fractionation when determining Hg bioaccessibility. Results also show that ingestion and/or inhalation of Hg from soil particles can contribute up to 8% of adult total Hg intake when compared to total Hg intake via consumption of contaminated fish and animal products from contaminated areas.

Mechanical and thermal properties of hot pressed CoCrMo-porcelain composites developed for prosthetic dentistry.

In this study, mechanical and thermal properties of CoCrMo-porcelain composites for dental restorations have been evaluated. These metal-ceramic composites were produced by powder metallurgy and hot pressing techniques from the mixtures of metal and ceramic powders with different volume fractions. Young's moduli and the coefficient of thermal expansion of materials were evaluated by dynamic mechanical analysis (DMA) and dilatometry (DIL) tests, respectively. The strength in flexion and shear was measured with a universal test machine and hardness with a respective tester. The microstructures and fracture surfaces were inspected by the means of optical microscopy and Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM/EDS). Shear strength, Flexural strength and Young' moduli of ceramic and metal-matrix composites were found to increase with higher metal particles content. The DMA tests performed at different frequencies showed no frequency-dependent features of the materials studied, indicating no viscoelastic behavior. The fracture surfaces analysis suggests the load-transfer mechanism be possibly responsible for this behavior, as the differences in CTE are low enough to cause significant thermal stresses in these materials. The results might be included in a materials properties database for further use for design and optimization of dental restorations.

Risk assessment for Cd, Cu, Pb and Zn in urban soils: chemical availability as the central concept.

To assess the geochemical reactivity and oral bioaccessibility of Cd, Cu, Pb and Zn in urban soils from the Porto area, four extractions were performed including Aqua Regia (AR; pseudototal), 0.43 M HNO3 (reactive), 0.01 M CaCl2 (available), and 0.4 M glycine at pH = 1.5, SBET method (oral bioaccessible pool). Oral bioaccessibility in urban soils was higher than in samples from rural, industrial and mining areas which is most likely related to sources of metals and parent materials of corresponding soils. The availability and reactivity were described well by non-linear Freundlich-type equations when considering differences in soil properties. The resulting empirical models are able to predict availability and reactivity and can be used to improve the accuracy of risk assessment. Furthermore, a close 1:1 relationship exists between results from the 0.43 M HNO3 method and the SBET method which substantially facilitates risk assessment procedures and reduces analytical costs.