Characterisation of Complex Electrode Processes using Simultaneous Impedance Spectroscopy and Electrochemical Nanogravimetric Measurements.

The methodology and illustrative examples of application are presented for a technique that simultaneously combines electrochemical impedance spectroscopy (EIS) and nanogravimetric measurements; the latter are implemented using a so-called electrochemical quartz crystal nanobalance (EQCN). The combination of EIS and EQCN provides a powerful method for the characterisation of many complex processes at electrochemical interfaces. This method gives in one relatively simple experiment more detailed information than is available from conventional electrochemical techniques. The combined measurements can be performed either as a function of time, at a constant electrode potential, or under potentiodynamic conditions, as a function of the electrode potential. Herein, we show how this can be applied to enable more accurate investigation of processes that occur at boundaries between electrodes and electrolytes. The application examples range from eletrocatalysis, in which evaluation of a catalyst is performed simultaneously with its formation, and the intercalation and electrodeposition of thin metal films to in situ characterisation of non-electroactive self-assembled monolayers during their formation.

Multiparametric characterization of nonelectroactive self-assembled monolayers during their formation.

The formation of nonelectroactive self-assembled monolayers (SAMs) at the electrode/electrolyte interface was characterized with simultaneous impedance, gravimetric, and direct current measurements. In the presence of specifically adsorbing inorganic ions, this provides key information about the formation of SAMs. Gravimetric measurements allow an estimation of the adsorbate surface coverage; and completion of the assembly process can then be monitored in real-time. Electrochemical impedance spectroscopy measurements play a multifunctional role: they enable elucidation of the physical models of the interface, provide the information about the effective capacitance of SAMs thus probing the dielectric properties of the adsorbed layers, and evaluate the ability of charged electrolyte components to approach the electrode surface through the SAM (using adsorbing/desorbing SO4(2-) as an electroactive probe). The latter is important to assess the extent of defects in the formed organic layers. Finally, monitoring the direct current during SAM formation together with the collected gravimetric data can give additional important information about the process. A series of n-mercaptoalcohols with different hydrocarbon chain length adsorbing at Au electrodes was used as the model object to evaluate the proposed approach.

Theoretical design and experimental implementation of Ag/Au electrodes for the electrochemical reduction of nitrate.

The current imbalance in the biogeochemical cycle of nitrogen is as serious as that of carbon. One way to mitigate this problem is through the electrochemical reduction of nitrates under mild conditions, which is an appealing though not fully understood process. Therefore, deeper insight into the electrocatalytic reaction mechanism is needed to optimize this process. Here we thoroughly analyse the adsorption energy of nitrate with DFT calculations on various surface facets of pure Au, Ag, and their near-surface and surface alloys, as the adsorption and subsequent reduction of nitrate are thought to be rate limiting in the electrocatalytic reaction. The observed systematic trends allow prediction of the surface with highest electrocatalytic activity for the reduction of nitrate. This prediction was verified experimentally by depositing sub-monolayer amounts of Ag on polycrystalline Au electrodes. We observe a well-defined volcano curve which correlates the amount of Ag deposited on the surface with the current density at a fixed potential, with the peak activity around 2/3 ML Ag surface coverage. The electrocatalytic activity and stability of the bimetallic Ag-Au systems, found through the interplay of theoretical modelling and empirical observations, serve as a clear example for the rational design of novel catalytic materials and confirm the key role that the adsorption of nitrate plays in the overall nitrate reduction rate.

Electrochemical characterisation of copper thin-film formation on polycrystalline platinum.

Electrochemically formed thin films are vital for a broad range of applications in virtually every field of modern science and technology. Understanding the film formation process could provide a means to aid the characterisation and control of film properties. Herein, we present a fundamental approach that combines two well-established analytical techniques (namely, electrochemical impedance spectroscopy and electrogravimetry) with a theoretical approach to provide physico-chemical information on the electrode/electrolyte interface during film formation. This approach allows the monitoring of local and overall surface kinetic parameters with time to enable an evaluation of the different modes of film formation. This monitoring is independent of surface area and surface concentrations of electroactive species and so may allow current computational methods to calculate these parameters and provide a deeper physical understanding of the electrodeposition of new bulk phases. The ability of this method to characterise 3D phase growth in situ in more detail than that obtained by conventional approaches is demonstrated through the study of a model system, namely, Cu bulk-phase deposition on a Pt electrode covered with a Cu atomic layer (Cu(ad)/Pt).

Towards a detailed in situ characterization of non-stationary electrocatalytic systems.

A complementary combination of cyclic voltammetry, impedance spectroscopy and quartz crystal microbalance techniques was used to: (i) control the assembly of a model electrocatalytic system consisting of monolayer and sub-monolayer amounts of Ag and Pb on a Au electrode, (ii) evaluate the system performance for the reduction of NO(3)(-) and (iii) study the disassembly of the electrocatalytic system to explore any changes which occurred during the assembly and/or catalytic stages. Physical models of the electrochemical interface (described in terms of equivalent electric circuits) at all stages are found to be considerably different but consistent with each other. Deposition of the Ag atomic layer on Au is accompanied by spontaneous surface alloying and specific adsorption of anions. In the following, deposition of the Pb atomic layer triggers further alloying in the Ag(ad)/Au layer while perchlorate-ions leave the surface. Approximately 1/3 of the Pb atomic layer on Ag(ad)/Au was found to demonstrate the best activity towards nitrate reduction. The developed experimental approach shows promise for the in situ characterization and control of all the non-stationary stages which are usually of particular importance in electrocatalytic research.

Specific indolo[3,2,1-jk]carbazole conducting thin-film materials production by selective substitution.

Selectively substituted indolo[3,2,1-jk] carbazole (IC) molecules have been synthesized through flash vacuum pyrolysis (FVP) and then electro-oxidized, resulting in the formation of redox-active and electronically conducting thin films consisting exclusively of three highly luminescent dimer species, the 2,2'-, 2,10'-, and 10,10'-coupled dimers. DFT calculation has enabled both the accurate calculation of monomer oxidation potentials and the prediction of the nature of the resulting dimers through consideration of the coupling of the oxidized monomer radical cations. This demonstrates that substituted ICs represent a class of molecules able to form redox-active and conducting dimer films of controlled composition upon oxidation and that DFT calculations can be used to inform the synthesis of specific IC monomers most likely to both produce electronically conducting thin-film materials and yield specific luminescent dimers with desirable materials properties.

The formation and characterisation of redox active and luminescent materials from the electrooxidation of indolizine.

Indolizine has been synthesised on the small scale with enhanced yield using a novel Flash Vacuum Pyrolysis method. Electrooxidation of indolizine results in the formation of a redox-active film on the electrode surface. Excellent agreement is found between calculated and experimental indolizine oxidation potentials; a combination of fluorescence and electrochemical studies are consistent with the computational prediction that electroxidation results in the formation of three specific and redox active indolizine dimers. The insoluble redox active film is considered to be polymeric and to arise from the further oxidation of these dimers at the electrode. This combination of methods can be used for the characterisation of products formed from the electrooxidation of novel luminescent heteroaromatics synthesised on a small scale and particularly those of interest as redox active species for electrochemical processes and devices.

Fluorescence enhancement by symmetry breaking in a twisted triphenylene derivative.

1,4,5,8,9,12-hexamethyltriphenylene (HMTP) shows a high photoluminescence quantum yield (PLQY) of 31% in the solid state, making it of interest for luminescence applications. The detailed photophysical properties of HMTP have been investigated by using time-resolved and steady-state luminescence, PLQY, and molar absorption coefficient measurements. An enhancement of the transition dipole moment for fluorescence and absorption was demonstrated compared to the case of unsubstituted triphenylene, which resulted in a 20-fold increase in the radiative decay rate. This is attributed to a breaking of triphenylene symmetry as a result of the necessarily twisted structure induced by steric crowding. In addition, it was shown that HMTP shows similar photoluminescence energies in solution, powder, and film, indicating a reduced propensity for intermolecular π-stacking compared to the case of triphenylene, as a result of this twisted structure. This work also develops a method for calculating the photoluminescence quantum yield of powders by using a calibrated photodiode in combination with an uncalibrated CCD spectrometer.

Cross-sectional study of the prevalence of radiographic degenerative joint disease in domesticated cats.

OBJECTIVE: To determine the prevalence of radiographic signs of degenerative joint disease (DJD) in a randomly selected sample of domestic cats. STUDY DESIGN: Prospective observational study. ANIMALS: Client-owned cats. METHODS: Cats (n=100) from a single practice and equally distributed across 4 age groups (0-5; 5-10; 10-15, and 15-20 years old) were randomly selected (regardless of heath status) and sedated for orthogonal radiographic projections of all joints and the spine. Quasi-Poisson regression analysis was used to investigate the relationship between patient demographics, blood biochemistry, hematologic and urine analysis variables, and DJD severity. RESULTS: Most (92%) cats had radiographic evidence of DJD; 91% had at least 1 site of appendicular DJD and 55% had > or = 1 site of axial column DJD. Affected joints in descending order of frequency were hip, stifle, tarsus, and elbow. The thoracic segment of the spine was more frequently affected than the lumbosacral segment. Although many variables were significantly associated with DJD, when variables were combined, only the association between age and DJD was significant (P<.0001). For each 1-year increase in cat age, the expected total DJD score increases by an estimated 13.6% (95% confidence interval: 10.6%, 16.8%). CONCLUSION: Radiographically visible DJD is very common in domesticated cats, even in young animals and is strongly associated with age. CLINICAL RELEVANCE: DJD is a common disease of domesticated cats that requires further investigation of its associated clinical signs.

Synthesis of novel 2,5-diarylselenophenes from selenation of 1,4-diarylbutane-1,4-diones or methanol/arylacetylenes.

Reaction of 2,4-bis(phenyl)-1,3-diselenadiphosphetane-2,4-diselenide [PhP(Se)(mu-Se)](2) (Woollins' reagent, WR) with one equivalent of 1,4-diarylbutane-1,4-diones 1a-g in refluxing toluene affords the corresponding 2,5-diarylselenophenes 2a-g in excellent yields (up to 99%). Alternatively, the 2,5-diarylselenophenes (2a and 2b) can be obtained in 70-80% yields from the reaction of arylacetylene with an equivalent of O-methyl Se-hydrogen phenylphosphonodiselenoate; the latter was derived from WR and methanol. The first X-ray structure of 2,5-diarylselenophenes is presented along with characterisation of their redox properties.

Calculation of the redox properties of aromatics and prediction of their coupling mechanism and oligomer redox properties.

The B3LYP density functional theory method has been used to determine theoretical values for the peak oxidation potentials for a range of redox-active aromatics in acetonitrile at room temperature. Excellent agreement to within 37 mV is found between these values and those observed experimentally. The calculated electron spin density distributions of indole monomer and indole oligomer radical cations also enable a plausible mechanism to be advanced by which the experimentally observed asymmetric trimer product is formed. Theoretical values for the peak oxidation potential of the indole trimer also show excellent agreement with those observed previously in electrochemical studies, again consistent with this asymmetric trimer product. Together, with the previously demonstrated ability of this approach to predict the coupling mechanisms and redox properties of the oligomers formed from indolocarbazole, these calculations provide a method for the in silico screening of molecular properties to inform molecular materials design and electrosynthesis.

The production and characterisation of novel conducting redox-active oligomeric thin films from electrooxidised indolo[3,2,1-jk]carbazole.

Indolo[3,2,1-jk]carbazole (IC) has been synthesised on a gram scale by flash vacuum pyrolysis. In contrast to a previous suggestion, IC is planar and it is also highly fluorescent, with a solution quantum yield of 0.41. Electro-oxidation of IC at a rotating disc electrode resulted in the passage of steady-state currents and the reproducible formation of conducting, redox-active films with constituent species that are also highly fluorescent. Unusually for coupled electroactive N-heterocyclic systems, electrochemical and spectroscopic characterisation revealed the film to consist exclusively of three redox-active (2,2', 5,5' and 2,5' coupled) IC dimers with no polymeric products. Calculations showed this coupling pattern to be consistent with IC radical-cation coupling through the accessible sites of highest unpaired electron density. The unusual combination of a high dimer second oxidation potential and a negligible dimer-dimer coupling rate explains the lack of further coupling. The identities of the dimeric species were confirmed by independent syntheses involving the Suzuki-Miyaura coupling of IC boronic acids as the key step. Electro-oxidation of the IC system therefore offers a ready route to novel conducting, redox-active molecular films and their redox-active, luminescent dimer constituents.

1,4,5,8,9,12-Hexamethyltriphenylene. A molecule with a flipping twist.

The synthesis and characterization of 1,4,5,8,9,12-hexamethyltriphenylene (5) is described. In the solid state, X-ray crystallographic studies reveal that compound 5 presents a highly distorted C2 geometry with a 53 degrees end-to-end twist. In solution, variable-temperature 1H NMR studies and molecular modeling present a story of rapid dynamic conformational interconversions between two C2 enantiomers (with a low activation barrier) and a slower C2-D3 interconversion (with a relatively high barrier)--the first time clear evidence of conformational interchange for these hindered triphenylenes has been provided. Further studies have established that 5 is a fluorescent stable blue emitter, and that the compound undergoes an irreversible one-electron electrochemical oxidation. Calculations have predicted this to be a radical cation of C2 geometry with 60 degrees end-to-end twist.

Dual triggering of DNA binding and fluorescence via photoactivation of a dinuclear ruthenium(II) arene complex.

The dinuclear RuII arene complexes [{(eta6-arene)RuCl}2(mu-2,3-dpp)](PF6)2, arene=indan (1), benzene (2), p-cymene (3), or hexamethylbenzene (4) and 2,3-dpp=2,3-bis(2-pyridyl)pyrazine, have been synthesized and characterized. Upon irradiation with UVA light, complexes 1 and 2 readily underwent arene loss, while complexes 3 and 4 did not. The photochemistry of 1 was studied in detail. In the X-ray structure of [{(eta6-indan)RuCl}2(mu-2,3-dpp)](PF6)2 (1), 2,3-dpp bridges two RuII centers 6.8529(6) A apart. In water, aquation of 1 in the dark occurs with replacement of chloride with biexponential kinetics and decay constants of 100+/-1 min-1 and 580+/-11 min-1. This aquation was suppressed by 0.1 M NaCl. UV or visible irradiation of 1 in aqueous or methanolic solution led to arene loss. The fluorescence of the unbound arene is approximately 40 times greater than when it is complexed. Irradiation of 1 also had a significant effect on its interactions with DNA. The DNA binding of 1 is increased after irradiation. The non-irradiated form of 1 preferentially formed DNA adducts that only weakly blocked RNA polymerase, while irradiation of 1 transformed the adducts into stronger blocks for RNA polymerase. The efficiency of irradiated 1 to form DNA interstrand cross-links was slightly greater than that of cisplatin in both 10 mM NaClO4 and 0.1 M NaCl. In contrast, the interstrand cross-linking efficiency of non-irradiated 1 in 10 mM NaClO4 was relatively low. An intermediate amount of cross-linking was observed when the sample of DNA already modified by non-irradiated 1 was irradiated. DNA unwinding measurements supported the conclusion that both mono- and bifunctional adducts with DNA can form. These results show that photoactivation of dinuclear RuII arene complexes can simultaneously produce a highly reactive ruthenium species that can bind to DNA and a fluorescent marker (the free arene). Importantly, the mechanism of photoreactivity is also independent of oxygen. These complexes, therefore, have the potential to combine both photoinduced cell death and fluorescence imaging of the location and efficiency of the photoactivation process.