Microwave-Assisted Ionic Liquid-Catalyzed Selective Monoesterification of Alkylphosphonic Acids-An Experimental and a Theoretical Study.

It is well-known that the P-acids including phosphonic acids resist undergoing direct esterification. However, it was found that a series of alkylphoshonic acids could be involved in monoesterification with C2-C4 alcohols under microwave (MW) irradiation in the presence of [bmim][BF4] as an additive. The selectivity amounted to 80-98%, while the isolated yields fell in the range of 61-79%. The method developed is a green method for P-acid esterification. DFT calculations at the M062X/6-311+G (d,p) level of theory (performed considering the solvent effect of the corresponding alcohol) explored the three-step mechanism, and justified a higher enthalpy of activation (160.6-194.1 kJ·mol-1) that may be overcome only by MW irradiation. The major role of the [bmim][BF4] additive is to increase the absorption of MW energy. The specific chemical role of the [BF4] anion of the ionic liquid in an alternative mechanism was also raised by the computations.

Focusing on the Catal. of the Pd- and Ni-Catalyzed Hirao Reactions.

The Hirao reaction involving the phosphinoylation or phosphonation of aryl halides by >P(O)H reagents is a P-C bond forming transformation belonging to the recently very hot topic of cross-couplings. The Pd- or Ni-catalyzed variations take place via the usual cycle including oxidative addition, ligand exchange, and reductive elimination. However, according to the literature, the nature of the transition metal catalysts is not unambiguous. In this feature article, the catalysts described for the Pd(OAc)2-promoted cases are summarized, and it is concluded that the "(HOY2P)2Pd(0)" species (Y = aryl, alkoxy) is the real catalyst. In our model, the excess of the >P(O)H reagent served as the P-ligand. During the less studied Ni(II)-catalyzed instances the "(HOY2P)(-OY2P)Ni(II)Cl-" form was found to enter the catalytic cycle. The newest conclusions involving the exact structure of the catalysts, and the mechanism for their formation explored by us were supported by our earlier experimental data and theoretical calculations.

Experimental and Theoretical Study on the "2,2'-Bipiridyl-Ni-Catalyzed" Hirao Reaction of >P(O)H Reagents and Halobenzenes: A Ni(0) → Ni(II) or a Ni(II) → Ni(IV) Mechanism?

It was found by us that the P-C coupling reaction of >P(O)H reagents with PhX (X = I and Br) in the presence of NiCl2/Zn as the precursors for the assumed Ni(0) complexant together with 2,2'-bipyridine as the ligand took place only with PhI at 50/70 °C. M06-2X/6-31G(d,p)//PCM(MeCN) calculations for the reaction of Ph2P(O)H and PhX revealed a favorable energetics only for the loss of iodide following the oxidative addition of PhI on the Ni(0) atom. However, the assumed transition states with Ni(II) formed after P-ligand uptake and deprotonation could not undergo reductive elimination meaning a "dead-end route". Hence, it was assumed that the initial complexation of the remaining Ni2+ ions with 2,2'-bipyridine may move the P-C coupling forward via a Ni(II) → Ni(IV) transition. This route was also confirmed by calculations, and this mechanism was justified by preparative experiments carried out using NiCl2/bipyridine in the absence of Zn. Hence, the generally accepted Ni(0) → Ni(II) route was refuted by us, confirming the generality of the Ni(II) → N(IV) protocol, either in the presence of bipyridine, or using the excess of the >P(O)H reagent as the P-ligand. The results of the calculations on the complex forming ability of Ni(0) and Ni(II) with 2,2'-bipyridine or the P-reagents were in accord with our mechanistic proposition.

Continuous Flow Esterification of a H-Phosphinic Acid, and Transesterification of H-phosphinates and H-Phosphonates under Microwave Conditions.

The microwave (MW)-assisted direct esterification of phenyl-H-phosphinic acid, transesterification of the alkyl phenyl-H-phosphinates so obtained, and the similar reaction of dibenzyl phosphite (DBP) were investigated in detail, and the batch accomplishments were translated into a continuous flow operation that, after optimization of the parameters, such as temperature and flow rate, proved to be more productive. Alcoholysis of DBP is a two-step process involving an intermediate phosphite with two different alkoxy groups. The latter species are of synthetic interest, as precursors for optically active reagents.

New Developments on the Hirao Reactions, Especially from "Green" Point of View.

BACKGROUND: The Hirao reaction discovered ca. 35 years ago is an important P-C coupling protocol between dialkyl phosphites and aryl halides in the presence of Pd(PPh3)4 as the catalyst and a base to provide aryl phosphonates. Then, the reaction was extended to other Preagents, such as secondary phosphine oxides and H-phosphinates and to other aryl and hetaryl derivatives to afford also phosphinic esters and tertiary phosphine oxides. Instead of the Pd(PPh3)4 catalyst, Pd(OAc)2 and Ni-salts were also applied as catalyst precursors together with a number of mono- and bidentate P-ligands. OBJECTIVE: In our review, we undertook to summarize the target reaction with a special stress on the developments attained in the last 6 years, hence this paper is an update of our earlier reviews in a similar topic. CONCLUSIONS: "Greener" syntheses aimed at utilizing phase transfer catalytic and microwave-assisted approaches, even under "P-ligand-free. or even solvent-free conditions are the up-to date versions of the classical Hirao reaction. The mechanism of the reaction is also in the focus these days.

The Palladium Acetate-Catalyzed Microwave-Assisted Hirao Reaction without an Added Phosphorus Ligand as a "Green" Protocol: A Quantum Chemical Study on the Mechanism.

It was proved by our experiments that on microwave irradiation, the mono- or bidentate phosphorus ligands generally applied in the palladium(II)-catalyzed P-C coupling reaction of aryl bromides and dialkyl phosphites or secondary phosphine oxides may be substituted by the excess of the >P(O)H reagent that exists under a tautomeric equilibrium. Taking into account that the reduction of the palladium(II) salt and the ligation of the palladium(0) so formed requires 3 equivalents of the P-species for the catalyst applied in a quantity of 5-10%, all together, 15-30% of the P-reagent is necessary beyond its stoichiometric quantity. In the coupling reaction of diphenylphosphine oxide, it was possible to apply diethyl phosphite as the reducing agent and as the P-ligand. The reactivities of the diethyl phosphite and diphenylphosphine oxide reagents were compared in a competitive reaction. The mechanism and the energetics of this new variation of the Hirao reaction of bromobenzene with Y2P(O)H reagents (Y=EtO and Ph) was explored by quantum chemical calculations. The first detailed study on simple reaction models justified our assumption that, under the conditions of the reaction, the trivalent form of the >P(O)H reagent may serve as the P-ligand in the palladium(0) catalyst, and shed light on the fine mechanism of the reaction sequence. The existence of the earlier described bis(palladium complex) {[H(OPh2P)2PdOAc]2} was refuted by high level theoretical calculations. This kind of complex may be formed only with chloride anions instead of the acetate anion. The interaction of palladium acetate and Y2P(O)H may result in only the formation of the [(HO)Y2P]2Pd complex that is the active catalyst in the Hirao reaction. The new variation of the Hirao reaction is of a more general value, and represents the greenest protocol, as there is no need for the usual P-ligands. Instead, the >P(O)H reagent should be used in an excess of up to 30%. Hence, the costs and environmental burdens may be decreased.