Formation of Large Crystalline Domains in a Semiconducting Polymer with Semi-fluorinated Alkyl Side Chains and Application to High-Performance Thin-Film Transistors.

The semi-fluorinated alkyl (SFA) side chain introduced thienylenevinylene (TV)-based p-type polymer, PC12TVC5F7T, was synthesized for use in organic thin-film transistors (OTFTs). Herein, we investigated the influence of SFA side chains on the morphology, molecular orientation, and crystalline structure using a combination of atomic force microscopy (AFM), scanning electron microscopy (SEM), two-dimensional (2D) grazing-incidence wide-angle X-ray scattering (GIWAXS), and density functional theory (DFT) calculations. Interestingly, the incorporation of SFA side chains led to the evolution of plate-like large-sized domains and also strongly intermolecular stacked high crystalline structures. Furthermore, due to the strong interactions between SFA side chains, several (00h) peaks could be observed for PC12TVC5F7T, in spite of their fairly large dihedral angle. As a result, due to the well-developed microstructure of PC12TVC5F7T, the OTFT devices based on it exhibited a high hole mobility of 1.91 cm2 V-1 s-1, which is an outstanding value among the poly(thiophene) derivative polymers. These observations indicate that large-sized domains and strongly intermolecular stacked high crystalline structures, which are beneficial for charge carrier transport, could be attained by the introduction of SFA side chains, further enhancing the performance of the OTFTs.

Orthogonal Printable Reduced Graphene Oxide 2D Materials as Hole Transport Layers for High-Performance Inverted Polymer Solar Cells: Sheet Size Effect on Photovoltaic Properties.

Creating an orthogonal printable hole-transporting layer (HTL) without damaging the underlying layer is still a major challenge in fabricating large-area printed inverted polymer solar cells (PSCs). In this study, we prepared orthogonal-processable fluorine-functionalized reduced graphene oxide (FrGO) series with various two-dimensional sheet sizes such as large-sized FrGO (1.1 µm), medium-sized FrGO (0.7 µm), and small-sized FrGO (0.3 µm) and systematically investigated the size effect of FrGOs on the hole transport properties of PSCs. The FrGOs exhibit highly stable dispersion without change over 90 days in 2-propanol solvent, indicating very high dispersion stability. Decreasing the sheet size of FrGOs enhanced hole-transporting properties, resulting in power conversion efficiencies (PCEs) of 9.27 and 9.02% for PTB7-Th:EH-IDTBR- and PTB7-Th:PC71BM-based PSCs, respectively. Compared to devices with solution-processed poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), a 14% enhancement of PCEs was achieved. Interestingly, the PCEs of devices with the smallest FrGO sheet are higher than the PCE of 8.77% of a device with vacuum-deposited MoO3. The enhancement in the performance of PSCs is attributed to the enhanced charge collection efficiency, decreased leakage current, internal resistance, and minimized charge recombination. Finally, small-sized FrGO HTLs were successfully coated on the photoactive layer using the spray coating method, and they also exhibited PCEs of 9.22 and 13.26% for PTB7-Th:EH-IDTBR- and PM6:Y6-based inverted PSCs, respectively.

Slot-Die Coated Perovskite Films Using Mixed Lead Precursors for Highly Reproducible and Large-Area Solar Cells.

Recently, many kinds of printing processes have been studied to fabricate perovskite solar cells (PeSCs) for mass production. Among them, slot-die coating is a promising candidate for roll-to-roll processing because of high-throughput, easy module patterning, and a premetered coating system. In this work, we employed mixed lead precursors consisting of PbAc2 and PbCl2 to fabricate PeSCs via slot-die coating. We observed that slot-die-coated perovskite films based on the mixed lead precursors exhibited well-grown and uniform morphology, which was hard to achieve by using only a single lead source. Consequently, PeSCs made with this precursor system showed improved device performance and reproducibility over single PbAc2. Lastly, a large-area module with an active area of 10 cm2 was fabricated with a power conversion efficiency of 8.3%.

Small-Molecule Organic Photovoltaic Modules Fabricated via Halogen-Free Solvent System with Roll-to-Roll Compatible Scalable Printing Method.

For the first time, the photovoltaic modules composed of small molecule were successfully fabricated by using roll-to-roll compatible printing techniques. In this study, blend films of small molecules, BTR and PC71BM were slot-die coated using a halogen-free solvent system. As a result, high efficiencies of 7.46% and 6.56% were achieved from time-consuming solvent vapor annealing (SVA) treatment and roll-to-roll compatible solvent additive approaches, respectively. After successful verification of our roll-to-roll compatible method on small-area devices, we further fabricated large-area photovoltaic modules with a total active area of 10 cm2, achieving a power conversion efficiency (PCE) of 4.83%. This demonstration of large-area photovoltaic modules through roll-to-roll compatible printing methods, even based on a halogen-free solvent, suggests the great potential for the industrial-scale production of organic solar cells (OSCs).

One-Step Printable Perovskite Films Fabricated under Ambient Conditions for Efficient and Reproducible Solar Cells.

Despite the potential of roll-to-roll processing for the fabrication of perovskite films, the realization of highly efficient and reproducible perovskite solar cells (PeSCs) through continuous coating techniques and low-temperature processing is still challenging. Here, we demonstrate that efficient and reliable CH3NH3PbI3 (MAPbI3) films fabricated by a printing process can be achieved through synergetic effects of binary processing additives, N-cyclohexyl-2-pyrrolidone (CHP) and dimethyl sulfoxide (DMSO). Notably, these perovskite films are deposited from premixed perovskite solutions for facile one-step processing under a room-temperature and ambient atmosphere. The CHP molecules result in the uniform and homogeneous perovskite films even in the one-step slot-die system, which originate from the high boiling point and low vapor pressure of CHP. Meanwhile, the DMSO molecules facilitate the growth of perovskite grains by forming intermediate states with the perovskite precursor molecules. Consequently, fully printed PeSC based on the binary additive system exhibits a high PCE of 12.56% with a high reproducibility.

Toward large scale roll-to-roll production of fully printed perovskite solar cells.

Fully printed perovskite solar cells are demonstrated with slot-die coating, a scalable printing method. A sequential slot-die coating process is developed to produce efficient perovskite solar cells and to be used in a large-scale roll-to-roll printing process. All layers excluding the electrodes are printed and devices demonstrate up to 11.96% power conversion efficiency. It is also demonstrated that the new process can be used in roll-to-roll production.

Impact of laparoscopic surgery on the long-term outcomes for patients with rectal cancer.

BACKGROUND: This 20-year retrospective study compared the results of laparoscopic surgery with open surgery for patients with rectal cancer to evaluate the impact of laparoscopic surgery on long-term oncological outcomes for rectal cancer. METHODS: We analysed survival data collected over 20 years for patients with rectal cancer (n= 407) according to surgical methods and tumour stage between those treated with laparoscopic surgery (n= 272) and those with open surgery (n= 135). Clinical factors were analysed to ascertain possible risk factors that might have been associated with survival from and recurrence of rectal cancer. A multivariate analysis was applied by using Cox's regression model to determine the impact of laparoscopic surgery on long-term oncological outcomes. RESULTS: Overall survival, disease-specific survival and disease-free survival rates were statistically higher in the laparoscopic group than in the open-surgery group. The incidence of local recurrence in the laparoscopic group (7.9%; 95% confidence intervals (CI), 4.2-11.5) was significantly lower than that for the open-surgery group (30.2%; 95% CI, 21.0-39.3; P < 0.001). By using a multivariate analysis, laparoscopic surgery for rectal cancer appeared not to be an independent factor for disease-specific survival or disease-free survival. However, the laparoscopic surgery was an independent factor associated with reduced local recurrence (Hazard ratio (HR), 3.408; 95% CI, 1.890-6.149; P < 0.001). CONCLUSION: Laparoscopic surgery did not adversely affect the long-term oncological outcome for patients with rectal cancer.