Biocompatibility assessment of silk nanoparticles: hemocompatibility and internalization by human blood cells.

Many nanoparticles are designed for use as potential nanomedicines for parenteral administration. However, emerging evidence suggests that hemocompatibility is important, but is highly particle- and test-bed dependent. Thus, knowledge of bulk material properties does not predict the hemocompatibility of uncharacterized nanoparticles, including silk nanoparticles. This study compares the hemocompatibility of silk versus silica nanoparticles, using whole human blood under quasi-static and flow conditions. Substantial hemocompatibility differences are noted for some nanoparticles in quasi-static versus dynamic studies; i.e., the inflammatory response to silk nanoparticles is significantly lower under flow versus quasi-static conditions. Silk nanoparticles also have very low coagulant properties - an observation that scales from the macro- to the nano-level. These nanoparticle hemocompatibility studies are complemented by preliminary live cell measurements to evaluate the endocytosis and trafficking of nanoparticles in human blood cells. Overall, this study demonstrates that nanoparticle hemocompatibility is affected by several factors, including the test bed design.

Biomaterials trigger endothelial cell activation when co-incubated with human whole blood.

Endothelial cell activation resulting from biomaterial contact or biomaterial-induced blood activation may in turn also affect hemostasis and inflammatory processes in the blood. Current in vitro hemocompatibility assays typically ignore these modulating effects of the endothelium. This study describes a co-incubation system of human whole blood, biomaterial and endothelial cells (ECs) that was developed to overcome this limitation. First, human endothelial cells were characterized in terms of their expression of coagulation- and inflammation-relevant markers in response to various activators. Subsequently, their capacity to regulate hemostasis as well as complement and granulocyte activation was monitored in a hemocompatibility assay. After blood contact, quiescent ECs exhibited anticoagulant and anti-inflammatory properties. When they were co-incubated with surfaces exhibiting pro-coagulant or pro-inflammatory characteristics, the ECs down-regulated coagulation but not complement or leukocyte activation. Analysis of intracellular levels of the endothelial activation markers E-selectin and tissue factor showed that co-incubation with model surfaces and blood significantly increased the activation state of ECs. Finally, the coagulation- and inflammation-modulating properties of the ECs were tested after blood/biomaterial exposure. Pre-activation of ECs by biomaterials in the blood induced a pro-coagulant and pro-inflammatory state of the ECs, wherein the pro-coagulant response was higher for biomaterial/blood pre-activated ECs than for TNF-α-pre-activated cells. This work provides evidence that biomaterials, even without directly contacting the endothelium, affect the endothelial activation state with and have consequences for plasmatic and cellular reactions in the blood.

Availability of extracellular matrix biopolymers and differentiation state of human mesenchymal stem cells determine tissue-like growth in vitro.

To explore the space-filling growth of adherent mesenchymal stem cells (MSC) into tissue-like structures in vitro, human bone marrow derived MSC were exposed to fibronectin-coated, millimeter-sized, triangular channels casted in poly(dimethyl siloxane) carriers. The results revealed that the three dimensional (3D) growth of MSC differs in dependence on differentiation status and availability of extracellular matrix (ECM) proteins: Massive 3D structure formation was observed for MSC under pro-osteogenic stimulation but not for undifferentiated MSC nor for MSC under pro-adipogenic stimulation; boosting cellular matrix secretion and addition of soluble ECM proteins caused extensive 3D tissue formation of undifferentiated MSC. The reported findings may contribute to bridge the gap between in vitro and in vivo analyses and guide the application of MSC in tissue replacement approaches.

Elucidating functional heterogeneity in hematopoietic progenitor cells: a combined experimental and modeling approach.

A detailed understanding of the mechanisms maintaining the hierarchical balance of cell types in hematopoiesis will be important for the therapeutic manipulation of normal and leukemic cells. Mathematical modeling is expected to make an important contribution to this area, but the iterative development of increasingly accurate models will rely on repeated validation using experimental data of sufficient resolution to distinguish between alternative model scenarios. The multipotent hematopoietic progenitor FDCP-Mix cells maintain a hierarchy from self-renewal to post-mitotic differentiation in vitro and are accessible to detailed analysis. Here, we report the development of a combined mathematical modeling and experimental approach to study the principles underlying heterogeneity in FDCP-Mix cultures. We adapt a single-cell based model of hematopoiesis to the conditions of cell culture and describe an association between proliferative history and phenotype of FDCP-Mix cells. While data derived from population studies are incapable of distinguishing between three mechanistically different model scenarios, statistical analysis of single cell tracking data provides a resolution sufficient to select one of them. This scenario favors differences between granulocytic and monocytic lineage with respect to their proliferative behavior and death rates as a mechanistic explanation for the observed heterogeneity. Our results demonstrate the power of a combined experimental/modeling approach in which single cell fate analysis is the key to revealing regulatory principles at the cellular level.

Multifunctional silk-heparin biomaterials for vascular tissue engineering applications.

Over the past 30 years, silk has been proposed for numerous biomedical applications that go beyond its traditional use as a suture material. Silk sutures are well tolerated in humans, but the use of silk for vascular engineering applications still requires extensive biocompatibility testing. Some studies have indicated a need to modify silk to yield a hemocompatible surface. This study examined the potential of low molecular weight heparin as a material for refining silk properties by acting as a carrier for vascular endothelial growth factor (VEGF) and improving silk hemocompatibility. Heparinized silk showed a controlled VEGF release over 6 days; the released VEGF was bioactive and supported the growth of human endothelial cells. Silk samples were then assessed using a humanized hemocompatibility system that employs whole blood and endothelial cells. The overall thrombogenic response for silk was very low and similar to the clinical reference material polytetrafluoroethylene. Despite an initial inflammatory response to silk, apparent as complement and leukocyte activation, the endothelium was maintained in a resting, anticoagulant state. The low thrombogenic response and the ability to control VEGF release support the further development of silk for vascular applications.

Surface modification of cell culture carriers: routes to anhydride functionalization of polystyrene.

Physico-chemical and topographical cues allow to control the behavior of adherent cells. Towards this goal, commercially available cell culture carriers can be finished with a laterally microstructured biomolecular functionalization. As shown in a previous study [Biomacromolecules 4 (2003) 1072], the anhydride moiety facilitates a simple and versatile way to protein binding. The present work addresses the technical issue of anhydride surface functionalization of polystyrene, the most common material for cell culture ware. Different approaches based on low pressure plasma, electron beam and ultraviolet light techniques (i.e. maleic anhydride plasma reactions; plasma, electron beam and UV immobilization of functional polymer thin films; grafting of functional polymers to plasma activated surfaces) are introduced and briefly illustrated with examples. Results are characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and ellipsometry. The different routes are compared in terms of technical feasibility and achievable surface properties.

A new approach to biofunctionalisation and micropatterning of multi-well plates.

Biomolecule attachment and lateral micropatterning of biomolecular layers are essential techniques to provide in advanced biochemical and cell culture assays. For that purpose, we introduced a versatile, simple and robust method to functionalise standard polystyrene well plates. Free amino groups were generated on the polystyrene surface by low pressure ammonia plasma treatment. Subsequently, thin films of different maleic anhydride copolymers were covalently attached to the surfaces. The distinct physicochemical properties of the coupled maleic anhydride copolymers provided a broad range of possible attachment schemes of proteins and polysaccharides. Micrometer-sized lateral patterns of these functional coatings were created by plasma etching through silicon masks and subsequent chemical conversion of the etched areas using poly(ethylene glycol). The approach facilitates a wide variety of cell culture experiments allowing a combination of biomolecule coupling and micropatterning within the multi-well plate technology.

The impact of primary and secondary ligand coupling on extracellular matrix characteristics and formation of endothelial capillaries.

The success of tissue engineering strategies using artificial scaffolds crucially depends on a controlled formation of well-developed vascular networks in growing tissues. The presentation of extracellular matrix ligands on scaffolds is often envisioned as an appropriate strategy to support capillary formation. We show that the control of primary coupling mode - covalent versus physisorbed - as well as secondary interactions of cell-secreted extracellular matrix proteins have a strong impact on endothelial cell development. A set of maleic anhydride copolymer thin films was used as planar model substrates. The copolymers exhibit a switchable mode of primary matrix coupling combined with a gradation of secondary matrix-substrate interaction due to a variation of surface hydrophobicity and polarity. We found that the cells adhere in a more native state at a low amount of covalent primary coupled fibronectin ligands in conjunction with weak interactions of secondarily adsorbed adhesion ligands on hydrophilic surfaces. These substrates allow for a formation of capillary-like networks of endothelial cells. High ligand densities and strong secondary hydrophobic interactions inhibit a pronounced capillary formation. Furthermore, the composition and structure of the formed extracellular matrix correlates well with the specific integrin binding pattern. From these results it is concluded that the formation of blood capillaries in artificial scaffolds can be triggered by controlling primary and secondary coupling of cell adhesion ligands to implant materials.

Hydrophobic and electrostatic interactions in the adsorption of fibronectin at maleic acid copolymer films.

Adsorption and desorption of fibronectin (FN) were investigated at thin films of alternating maleic acid copolymers with octadecene (POMA) and with propene (PPMA). The hydrophobicity and charge density of the polymers were modulated by the choice of the comonomer. In consequence, the dominant forces between the substrate and the protein were specified as hydrophobic interaction for POMA and electrostatic interaction for PPMA. The adsorption kinetics were investigated in situ as variations of the optical thickness, adsorbed mass, and viscoelastic properties (detected by reflectometric interference spectroscopy and quartz crystal microbalance technique, respectively) while alterations of the electrosurface properties were derived from surface conductivity data and isoelectric points (by streaming potential/current measurements using a microslit electrokinetic setup). The results demonstrate that the interfacial mode of adsorbed FN depends on the predominant interactions: large amounts of FN were tightly bound to POMA by hydrophobic interactions. In contrast, FN adsorbed on PPMA was concluded to attain an unfolded structure allowing for the "electrostatic matching" of positively charged residues on FN with the maleic acid groups. This conclusion was supported by the acidic IEP of 3.2 found for FN on PPMA and a significant reduction of the surface conductivity of the FN-covered polymer film, whereas FN on POMA showed an IEP of 4.2 (close to the intrinsic IEP of FN), indicating a stochastic orientation of the adsorbed protein.