Self-Tuning Control Using an Online-Trained Neural Network to Position a Linear Actuator.

Linear actuators are widely used in all kinds of industrial applications due to being devices that convert the rotation motion of motors into linear or straight traction/thrust motion. These actuators are ideal for all types of applications where inclination, lifting, traction, or thrust is required under heavy loads, such as wheelchairs, medical beds, and lifting tables. Due to the remarkable ability to exert forces and good precision, they are used classic control systems and controls of high-order. Still, they present difficulties in changing their dynamics and are designed for a range of disturbances. Therefore, in this paper, we present the study of an electric linear actuator. We analyze the positioning in real-time and attack the sudden changes of loads and limitation range by the control. It uses a general-purpose control with self-tuning gains, which can deal with the essential uncertainties of the actuator and suppress disturbances, as they can change their weights to interact with changing systems. The neural network combined with PID control compensates the simplicity of this type of control with artificial intelligence, making it robust to drastic changes in its parameters. Unlike other similar works, this research proposes an online training network with an advantage over typical neural self-adjustment systems. All of this can also be dispensed with the engine model for its operation. The results obtained show a decrease of 42% in the root mean square error (RMSE) during trajectory tracking and saving in energy consumption by 25%. The results were obtained both in simulation and in real tests.

Improvement of Ultrasonic Pulse Generator for Automatic Pipeline Inspection.

This paper presents the improvement of an ultrasonic pulse generator for a pipeline inspection gauge (PIG), which uses 64 transducers for inspecting distances up to 100 km with an axial resolution fixed at 3 mm and variable speeds between 0 and 2 m/s. An ultrasonic pulse generator is composed of a high-voltage (HV) MOSFETs, driver logic and an HV power supply. We used a DC-HV DC converter device as the HV power supply because it reduces the size of the ultrasound system considerably. However, pipeline geometry and inspection effects such as hammer and shock cause a variable pulse repetition frequency (PRF), producing voltage drops, poor quality of the HV pulse generated, failures in the dimensioning of defects and damage to devices by over-voltage. Our improvement is to implement a control scheme to maintain the high quality of the HV regardless of the variable PRF. To achieve this, we characterized three transfer functions of the DC-HV DC converter, varying the connected load to 10%, 45% and 80%. For the characterization, we used the least squares technique, considering an autoregressive exogenous (ARX) model. Later, we compared three control schemes: (1) proportional-integral-derivative (PID) tuned by simultaneous optimization of several responses (SOSR), (2) PID tuned by a neural network (NN) and (3) PI tuned by the analytical design method (ADM). The metrics used to compare the control schemes were the recovery time, the maximum over-voltage and the excess energy when the shock and hammer effects happen to occur. Finally, to verify the improvement of the HV pulser, we compared the ultrasonic pulses generated for various frequencies and amplitudes using the pulse generator with and without the control scheme.

Neural Network-Based Self-Tuning PID Control for Underwater Vehicles.

For decades, PID (Proportional + Integral + Derivative)-like controllers have been successfully used in academia and industry for many kinds of plants. This is thanks to its simplicity and suitable performance in linear or linearized plants, and under certain conditions, in nonlinear ones. A number of PID controller gains tuning approaches have been proposed in the literature in the last decades; most of them off-line techniques. However, in those cases wherein plants are subject to continuous parametric changes or external disturbances, online gains tuning is a desirable choice. This is the case of modular underwater ROVs (Remotely Operated Vehicles) where parameters (weight, buoyancy, added mass, among others) change according to the tool it is fitted with. In practice, some amount of time is dedicated to tune the PID gains of a ROV. Once the best set of gains has been achieved the ROV is ready to work. However, when the vehicle changes its tool or it is subject to ocean currents, its performance deteriorates since the fixed set of gains is no longer valid for the new conditions. Thus, an online PID gains tuning algorithm should be implemented to overcome this problem. In this paper, an auto-tune PID-like controller based on Neural Networks (NN) is proposed. The NN plays the role of automatically estimating the suitable set of PID gains that achieves stability of the system. The NN adjusts online the controller gains that attain the smaller position tracking error. Simulation results are given considering an underactuated 6 DOF (degrees of freedom) underwater ROV. Real time experiments on an underactuated mini ROV are conducted to show the effectiveness of the proposed scheme.