Yttrium Iron Garnet Thin Films with Very Low Damping Obtained by Recrystallization of Amorphous Material.

We have investigated recrystallization of amorphous Yttrium Iron Garnet (YIG) by annealing in oxygen atmosphere. Our findings show that well below the melting temperature the material transforms into a fully epitaxial layer with exceptional quality, both structural and magnetic. In ferromagnetic resonance (FMR) ultra low damping and extremely narrow linewidth can be observed. For a 56 nm thick layer a damping constant of α = (6.15 ± 1.50) · 10(-5) is found and the linewidth at 9.6 GHz is as small as 1.30 ± 0.05 Oe which are the lowest values for PLD grown thin films reported so far. Even for a 20 nm thick layer a damping constant of α = (7.35 ± 1.40) · 10(-5) is found which is the lowest value for ultrathin films published so far. The FMR linewidth in this case is 3.49 ± 0.10 Oe at 9.6 GHz. Our results not only present a method of depositing thin film YIG of unprecedented quality but also open up new options for the fabrication of thin film complex oxides or even other crystalline materials.

Electric-Field Control of the Orbital Occupancy and Magnetic Moment of a Transition-Metal Oxide.

By using soft-x-ray linear and magnetic dichroism on La_{0.825}Sr_{0.175}MnO_{3}/PbZr_{0.2}Ti_{0.8}O_{3} ferromagnetic-ferroelectric heterostructures we demonstrate a nonvolatile modulation of the Mn 3d orbital anisotropy and magnetic moment. X-ray absorption spectroscopy at the Mn L_{2,3} edges shows that the ferroelectric polarization direction modifies the carrier density, the spin moment, and the orbital splitting of t_{2g} and e_{g} Mn 3d states. These results are consistent with polar distortions of the oxygen octahedra surrounding the Mn ions induced by the switching of the ferroelectric polarization.

Four-state ferroelectric spin-valve.

Spin-valves had empowered the giant magnetoresistance (GMR) devices to have memory. The insertion of thin antiferromagnetic (AFM) films allowed two stable magnetic field-induced switchable resistance states persisting in remanence. In this letter, we show that, without the deliberate introduction of such an AFM layer, this functionality is transferred to multiferroic tunnel junctions (MFTJ) allowing us to create a four-state resistive memory device. We observed that the ferroelectric/ferromagnetic interface plays a crucial role in the stabilization of the exchange bias, which ultimately leads to four robust electro tunnel electro resistance (TER) and tunnel magneto resistance (TMR) states in the junction.

Ferroelectric 180° domain wall motion controlled by biaxial strain.

180° domain wall motion in a tetragonal ferroelectric oxide is accelerated by an order of magnitude using in situ strain in a force microscope. Single-domain PbZr0.2 Ti0.8 O3 films on piezoelectric (001)-oriented 0.72PbMg1/3 Nb2/3 O3 -0.28PbTiO3 substrates allow for direct investigation of strain-dependent domain dynamics. The strain effect depends on the sign of applied field through strain-dependent electrode built-in potentials and a suggested charging of tilted walls.

Spintronic functionality of BiFeO3 domain walls.

Anisotropic magnetoresistance at the BiFeO3 domain walls has been observed thanks to the realization of micro-devices that allow the direct magneto-transport characterization of the domain-walls. Anisotropic magnetoresistance of ferromagnetic metals has been a pillar in spintronic technology, and now it is evidenced at the conductive domain walls of an insulating ferroelectric material, which implies that domain walls become an electrically tunable nanospintronic object.

Persistent photoconductivity in strained epitaxial BiFeO3 thin films.

A drastic change in the conductivity of strained BiFeO3 (BFO) films is observed after illuminating them with above-band gap light. This has been termed as persistent photoconductivity. The enhanced conductivity decays exponentially with time. A trapping character of the sub-band levels and their subsequent gradual emptying is proposed as a possible mechanism.

Nucleation-induced self-assembly of multiferroic BiFeO3-CoFe2O4 nanocomposites.

Large areas of perfectly ordered magnetic CoFe2O4 nanopillars embedded in a ferroelectric BiFeO3 matrix were successfully fabricated via a novel nucleation-induced self-assembly process. The nucleation centers of the magnetic pillars are induced before the growth of the composite structure using anodic aluminum oxide (AAO) and lithography-defined gold membranes as hard mask. High structural quality and good functional properties were obtained. Magneto-capacitance data revealed extremely low losses and magneto-electric coupling of about 0.9 µC/cmOe. The present fabrication process might be relevant for inducing ordering in systems based on phase separation, as the nucleation and growth is a rather general feature of these systems.

First-order reversal curve probing of spatially resolved polarization switching dynamics in ferroelectric nanocapacitors.

Spatially resolved polarization switching in ferroelectric nanocapacitors was studied on the sub-25 nm scale using the first-order reversal curve (FORC) method. The chosen capacitor geometry allows both high-veracity observation of the domain structure and mapping of polarization switching in a uniform field, synergistically combining microstructural observations and probing of uniform-field polarization responses as relevant to device operation. A classical Kolmogorov-Avrami-Ishibashi model has been adapted to the voltage domain, and the individual switching dynamics of the FORC response curves are well approximated by the adapted model. The comparison with microstructures suggests a strong spatial variability of the switching dynamics inside the nanocapacitors.

Nanostructured ferroelectrics: fabrication and structure-property relations.

With the continued demand for ultrahigh density ferroelectric data storage applications, it is becoming increasingly important to scale the dimension of ferroelectrics down to the nanometer-scale region and to thoroughly understand the effects of miniaturization on the materials properties. Upon reduction of the physical dimension of the material, the change in physical properties associated with size reduction becomes extremely difficult to characterize and to understand because of a complicated interplay between structures, surface properties, strain effects from substrates, domain nucleation, and wall motions. In this Review, the recent progress in fabrication and structure-property relations of nanostructured ferroelectric oxides is summarized. Various fabrication approaches are reviewed, with special emphasis on a newly developed stencil-based method for fabricating ferroelectric nanocapacitors, and advantages and limitations of the processes are discussed. Stress-induced evolutions of domain structures upon reduction of the dimension of the material and their implications on the electrical properties are discussed in detail. Distinct domain nucleation, growth, and propagation behaviors in nanometer-scale ferroelectric capacitors are discussed and compared to those of micrometer-scale counterparts. The structural effect of ferroelectric nanocapacitors on the domain switching behavior and cross-talk between neighboring capacitors under external electric field is reviewed.

Nonlinear phenomena in multiferroic nanocapacitors: joule heating and electromechanical effects.

We demonstrate an approach for probing nonlinear electromechanical responses in BiFeO(3) thin film nanocapacitors using half-harmonic band excitation piezoresponse force microscopy (PFM). Nonlinear PFM images of nanocapacitor arrays show clearly visible clusters of capacitors associated with variations of local leakage current through the BiFeO(3) film. Strain spectroscopy measurements and finite element modeling point to significance of the Joule heating and show that the thermal effects caused by the Joule heating can provide nontrivial contributions to the nonlinear electromechanical responses in ferroic nanostructures. This approach can be further extended to unambiguous mapping of electrostatic signal contributions to PFM and related techniques.

Magnetoelectric coupling in ordered arrays of multilayered heteroepitaxial BaTiO3/CoFe2O4 nanodots.

Fully epitaxial BaTiO(3)/CoFe(2)O(4) ferroelectric/ferromagnetic multilayered nanodot arrays, a new type of magnetoelectric (ME) nanocomposite with both horizontal and vertical orderings, were fabricated via a stencil-derived direct epitaxy technique. By reducing the clamping effect, ferroelectric domain modification and distinct magnetization change proportional to different interfacial area around the BaTiO(3) phase transition temperatures were found, which may pave the way to quantitative introducing of ME coupling at nanoscale and build high density multistate memory devices.

Room-temperature ferroelectric resistive switching in ultrathin Pb(Zr 0.2 Ti 0.8)O3 films.

Spontaneous polarization of ferroelectric materials has been for a long time proposed as binary information support, but it suffers so far from destructive readout. A nondestructive resistive readout of the ferroelectric polarization state in a metal-ferroelectric-metal capacitor would thus be advantageous for data storage applications. Combing conducting force microscopy and piezoelectric force microscopy, we unambiguously show that ferroelectric polarization direction and resistance state are correlated for epitaxial ferroelectric Pb(Zr(0.2)Ti(0.8))O(3) nanoscale capacitors prepared by self-assembly methods. For intermediate ferroelectric layer thickness (∼9 nm) sandwiched between copper and La(0.7)Sr(0.3)MnO(3) electrodes we achieved giant electroresistance with a resistance ratio of >1500 and high switching current densities (>10 A/cm(2)) necessary for effective resistive readout. The present approach uses metal-ferroelectric-metal devices at room temperature and, therefore, significantly advances the use of ferroelectric-based resistive switching.

Direct observation of continuous electric dipole rotation in flux-closure domains in ferroelectric Pb(Zr,Ti)O3.

Low-dimensional ferroelectric structures are a promising basis for the next generation of ultrahigh-density nonvolatile memory devices. Depolarization fields, created by incompletely compensated charges at the surfaces and interfaces, depress the polarization of such structures. Theory suggests that under conditions of uncompensated surface charges, local dipoles can organize in flux-closure structures in thin films and vortex structures in nano-sized ferroelectrics, reducing depolarization fields. However, the continuous rotation of the dipoles required in vortex structures and the behavior of unit cell dipoles in flux-closure structures have never been experimentally established. By aberration-corrected transmission electron microscopy, we obtained experimental evidence for continuous rotation of the dipoles closing the flux of 180° domains in a ferroelectric perovskite thin film.

On the influence of strain on ion transport: microstructure and ionic conductivity of nanoscale YSZ|Sc2O3 multilayers.

Multilayer samples of the type (YSZ|Sc2O3) × n with layer thicknesses between 8 nm (n=100) and 250 nm (n=5) were prepared on (0001) sapphire substrates by pulsed laser deposition (PLD). The samples were characterised using X-ray diffraction (XRD), scanning electron microscopy (HRSEM) and transmission electron microscopy (TEM/HRTEM, SAED (selected-area electron diffraction) and quantitative EELS (electron energy-loss spectroscopy)). The polycrystalline layers show a columnar microstructure, which is typical for the used preparation technique. The layers are highly textured and only one axial orientation relation is found between yttria-stabilised zirconia (YSZ), scandium oxide and the substrate: (0001) Al2O3‖(111) Sc2O3‖(111) YSZ. A preferred orientation relationship also exists for the azimuthal rotation of the crystallites, which was demonstrated by SAED, XRD pole figure measurements and fast Fourier transformation (FFT) of HRTEM micrographs. The interfaces between YSZ, Sc2O3 and the substrate are sharp and do not contain diffuse transition regions. Dislocations appear not to be arranged in regular arrays. With increasing interface density (thinner individual layers in the multilayer), the conductivity of the multilayers decreases. We relate this to the negative nominal misfit present at the YSZ|Sc2O3 interfaces (compressive stress in YSZ at the phase boundaries). This observation agrees well with the previously investigated case of YSZ|Y2O3 (A. Peters et al., Phys. Chem. Chem. Phys., 2008, 10, 4623), where tensile misfit strain was present in YSZ at the phase boundaries, leading to a conductivity increase.

Non-Kolmogorov-Avrami-Ishibashi switching dynamics in nanoscale ferroelectric capacitors.

Switching dynamics of nanoscale ferroelectric capacitors with a radius of 35 nm were investigated using piezoresponse force microscopy. Polarization switching starts with only one nucleation event occurring only at the predetermined places. The switching dynamics of nanoscale capacitors did not follow the classical Kolmogorov-Avrami-Ishibashi model. On the basis of the consideration of two separate (nucleation and growth) steps within a nonstatistical finite system, we have proposed a model which is in good agreement with the experimental results.

Microstructure and properties of well-ordered multiferroic Pb(Zr,Ti)O(3)/CoFe(2)O(4) nanocomposites.

A nanofabrication technique combining pulsed laser deposition and a nanoporous anodic aluminum oxide membrane mask is being proposed to prepare various types of multiferroic nanocomposites, viz. periodically ordered CoFe(2)O(4) dots covered by a continuous Pb(Zr,Ti)O(3) layer, Pb(Zr,Ti)O(3) dots covered with CoFe(2)O(4), and Pb(Zr,Ti)O(3)/CoFe(2)O(4) bilayer heterostructure dots. By properly tuning the processing parameters, epitaxial nanodot-matrix composites can be obtained. For the composite consisting of CoFe(2)O(4) nanostructures covered by a Pb(Zr,Ti)O(3) film, an unexpected out-of-plane magnetic easy axis induced by the top Pb(Zr,Ti)O(3) layer and a uniform microdomain structure can be observed. The nanocomposites tested by piezoresponse force microscopy (PFM) exhibit strong piezoelectric signals, and they also display magnetoelectric coupling revealed by magnetic-field dependent capacitance measurement.

Wafer-scale arrays of epitaxial ferroelectric nanodiscs and nanorings.

Wafer-scale arrays of well-ordered Pb(Zr(0.2)Ti(0.8))O3 nanodiscs and nanorings were fabricated on the entire area (10 mm x 10 mm) of the SrRuO3 bottom electrode on an SrTiO3 single-crystal substrate using the laser interference lithography (LIL) process combined with pulsed laser deposition. The shape and size of the nanostructures were controlled by the amount of PZT deposited through the patterned holes and the temperature of the post-crystallization steps. X-ray diffraction and transmission electron microscopy confirmed that (001)-oriented PZT nanostructures were grown epitaxially on the SrRuO3(001) bottom electrode layer covering the (001)-oriented single-crystal substrate. The domain structures of PZT nano-islands were characterized by reciprocal space mapping using synchrotron x-ray radiation. Ferroelectric properties of each PZT nanostructure were characterized by scanning force microscopy in the piezoresponse mode.

Multitwinned spinel nanowires by assembly of nanobricks via oriented attachment: a case study of Zn2TiO4.

Nanowires with twinned morphology have been observed in many cubic-phase materials including spinel. We study systematically the formation of multitwinned Zn(2)TiO(4) nanowires based on a solid-solid reaction of ZnO nanowires with a conformal shell of TiO(2), which is deposited by atomic layer deposition (ALD). By varying the solid-state reaction temperature, reaction time, and TiO(2) shell thickness, the formation process is carefully analyzed with the help of transmission electron microscopy. It is found that the multitwins develop through an oriented attachment of initially separated spinel nanobricks and a simultaneous Ostwald ripening process. The oriented assembly of the individual bricks is strongly dependent on annealing conditions, which is required to favor the motion and interaction of the bricks. This mechanism differs dramatically from those proposed for twinned nanowires grown with the presence of metal catalysts. Our result provides new insights on controlling the morphology and crystallinity of designed 1-D nanostructures based on a solid-state reaction route.