Selective pressurized liquid extraction for the analysis of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and dibenzofurans in soil.

During this study a high throughout selective pressurized liquid extraction (SPLE) method was developed and validated for the simultaneous extraction of polychlorinated dibenzo-p-dioxins, dibenzofurans (PCDD/PCDFs) and polychlorinated biphenyls (PCBs) from soil. To that end, extraction rates of PCBs from soil utilizing different extraction solvents and different extraction temperatures were investigated whereas extraction rates were comparable for toluene, n-hexane and dichloromethane (extraction conditions for all utilized solvents: 33mL PLE extraction cell, extraction temperature: 110°C, static extraction time: 5min, flush volume: 60%, purge 90s). Ratios of native PCBs and PCDD/PCDFs congener concentrations after Soxhlet and selective pressurized liquid extraction (SPLE) showed that SPLE is an alternative sample preparation step for the simultaneous determination of PCDD/PCDFs and PCBs in soil. Additional clean-up steps for the separation of PCBs and PCDD/PCDFs utilizing alumina were performed in order to avoid interferences between the component classes.

Analysis of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and dibenzofurans in particulate and oily films on impervious surfaces.

During this study wipe sampling was applied to various impervious surfaces for the determination of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) area concentrations. To that end, a wipe sampling method based on solvent wetted cotton wipes was evaluated and transfer efficiencies of PCBs and PCDD/PCDFs in particulate films (PFs) and oily liquid films (OFs) during sampling were investigated. For PFs sufficient transfer efficiencies of low concentrated PCB and PCDD/PCDF congeners in 1g/m(2) spiking surrogate were achieved after the first wipe using n-hexane as wetting solvent. Transfer efficiencies for OFs were the highest in the first wipe if n-hexane or n-heptane were used rather than toluene. The spiking experiments of OFs showed a log-linear correlation between the number of wiping procedures and transfer efficiency which indicates that transfer efficiencies were constant in subsequent wipes. Furthermore, it was successfully demonstrated that pressurized liquid extraction is a suitable tool for the extraction of wipe samples. Finally, the feasibility of this wipe sampling method was demonstrated on various impervious surfaces of different origin, and concentration levels of PCBs and PCDD/PCDFs in wipe samples are discussed. Hereby, remarkably high ∑CB6 concentrations of up to 1400µg/m(2) (taken at a transformer recycling site) were detected.

Polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and dibenzofurans in street dust of North Rhine-Westphalia, Germany.

In this study the occurrence of polychlorinated biphenyls (PCBs), polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDDs/PCDFs) in street dust samples was investigated using pressurized liquid extraction and gas chromatography coupled to mass spectrometry. Street dust samples were taken from rural, urban, industrial and industrially influenced urban areas. PCB6 concentrations ranged from 5090±2200 µg/kg (average±standard error of mean) in dusts from industrial premises to 29±8.7 µg/kg in rural areas. Concentration ranges were for dioxin-like PCB toxicity equivalents (dl-PCB TEQ) from 362±164 ng/kg (industrial premises) to 6.5±1.8 ng/kg (rural areas), and for PCDD/PCDF TEQ from 503±448 ng/kg to 2.4±0.13 ng/kg, respectively. Area concentrations of PCB6 (0.040 µg/m2-22 µg/m2), dl-PCB TEQ (0.0038 ng/m2-2.6 ng/m2) and PCDD/PCDF TEQs (14 pg/m2-1980 pg/m2) were estimated. Furthermore, particle size related concentrations of PCBs and PCDD/PCDFs in street dusts were analysed showing throughout almost all samples a distinctive trend of increasing concentrations with decreasing particle sizes. Characterization of homologue patterns of PCBs and PCDDs/PCDFs in street dusts was performed showing a dependence of homologue patterns on different area types, especially for PCBs. It could be demonstrated that the analysis of concentrations in combination with specific homologue patterns of PCBs and PCDDs/PCDFs in street dust samples enables allocation of potential emission sources.

Trends of PCDD/F and PCB concentrations and depositions in ambient air in Northwestern Germany.

Time series of polychlorinated dioxins and furans (PCDD/F) and polychlorinated biphenyls (PCB) in ambient air of a large conurbation in North-Western Germany are presented and analyzed. The trend of PCDD/F concentrations, starting from as early as 1988, shows a pronounced decrease by at least one order of magnitude, demonstrating that the emission reductions were effective. The PCDD/F depositions also have decreased by a factor of 5 since 1992. However, both trends have leveled out since 2005. Time series of PCB concentrations and depositions starting in 1994 show only slight decreases for the concentrations and almost no decrease for the depositions. From the decay rates following first order kinetics, half-lives in the order of 5-15 years for the PCDD/F and 15-31 years for the sum of the six indicator PCB could be calculated, which are much longer than the half-lives estimated from their reactivity towards the OH radical. Apparently, small fresh emissions (PCDD/F), considerable secondary emissions and evaporation from contaminated soils slow down their decay in the atmosphere of big conurbations. Analyzing the decay rates of individual PCB congeners shows that the lower chlorinated and more volatile ones are removed faster than the higher chlorinated congeners, probably via gas phase reactions with the OH radical. It can be concluded from the present study that the input of PCDD/F and PCB into the food chain via the air path will continue for another one or two decades in big conurbations.

Determination of polychlorinated biphenyls and polychlorinated dibenzo-p-dioxins and dibenzofurans by pressurized liquid extraction and gas chromatography coupled to mass spectrometry in street dust samples.

Owing to massive pollution with polychlorinated biphenyls in the harbour area of Dortmund (Germany), several dust samples were taken from surfaces at industrial sites and analyzed by the North-Rhine Westphalian State Agency for Nature, Environment, and Consumer Protection (LANUV NRW). This report describes and validates a rapid approach to screening for the presence of polychlorinated biphenyls (PCBs) in street dust. Samples were collected by using a natural bristle brush and stainless steel scoops. Mass recovery of fine-particle sea sand (a dust surrogate) on asphalt and concrete surfaces was used as a criterion for the effectiveness of sampling. Better recoveries of sea sand were achieved on concrete than on asphalt surfaces. Furthermore, temperature optimization for a pressurized liquid extraction (PLE) method used to extract PCBs and polychlorinated dibenzodioxins and polychlorinated furans (PCDD/Fs) from street dust samples was developed and compared with Soxhlet extraction for the analysis of PCBs in real street dust samples. Toluene was used as the extraction solvent in both cases. During this study, a combination of toluene and PLE achieved better extraction efficiencies than Soxhlet extraction. Finally, the performance of the PLE method was evaluated by analysing NIST Standard Reference Material 1649a for PCB and PCDD/F concentrations. This demonstrated that the accuracy of the PLE method for the determination of both substance classes was satisfactory. In addition, concentrations of PCBs and PCDD/Fs in street dust samples from industrial sites are reported.