Mechanical performance of traditional distraction-based dual growing rod constructs.

BACKGROUND: Growing rod constructs are an important contribution in the treatment of children with early onset scoliosis even though these devices experience high rates of rod fracture. The mechanical performance of traditional, distraction-based dual growing rod constructs is not well understood, and mechanical models for predicting device performance are limited. PURPOSE: Two mechanical models were developed and used to determine the mechanical performance of various growing rod configurations by increasing construct complexity. STUDY DESIGN/SETTING: Mechanical bench testing and finite element (FE) analysis. METHODS: Static and dynamic compression bending tests were based on an ASTM F1717 method modified to accommodate dual growing rod constructs. Six construct configurations were tested, mechanical properties were recorded, and statistical analyses were performed to determine significant differences between groups: (1) no connectors (rods only), (2) side-by-side connectors, (3) side-by-side connectors plus 4 crosslinks, (4) (40-mm long tandem connectors, (5) 80-mm long tandem connectors, and (6) 80-mm long tandem connectors plus 4 crosslinks. FE analysis was used to predict the stress distribution within the constructs. RESULTS: The static results indicated greater stiffness, yield load, and peak load as the axial connector length increased (side-by-side to 40 mm tandem to 80 mm tandem). The dynamic results showed similar cycles to failure for side-by-side and tandem connector (40 and 80 mm) construct configurations without crosslinks. Crosslinks shifted the location of rod fracture observed experimentally and significantly reduced the fatigue life of the construct. The flexibility of the construct decreased significantly as the axial connector length increased. FE predictions were highly consistent with the experimentally measured values and provided information on stress distribution within the rod for comparison to experimental fracture locations. CONCLUSIONS: This is the first study to evaluate mechanical performance of various configurations of pediatric growing rod constructs using preclinical models. The current study is consistent with a previous retrieval study in that rigid constructs lacking flexibility (ie, higher stiffness and lower displacement), such as those with 80-mm tandem connectors and multiple crosslinks, demonstrated decreased mechanical performance as shown through both experimental and computational models. Additionally, the experimental and computational findings suggest that surgeons should strategically consider the number of interconnecting components and subsequent stress concentrations along the posterior side of the rod. For example, changing the placement of crosslinks to low stress regions of the construct or not using crosslinks in the construct are options.

Wrist Resistance Training Improves Motor Control and Strength.

Chu, E, Kim, Y-S, Hill, G, Kim, YH, Kim, CK, and Shim, JK. Wrist resistance training improves motor control and strength. J Strength Cond Res 32(4): 962-969, 2018-The aim of this study was to investigate the effects of a 6-week direction-specific resistance training program on isometric torque control and isokinetic torque strength of the wrist joint. Nineteen subjects were randomly assigned to either the wrist training group (n = 9) or the control group (n = 10). The training group performed wrist exercises in 6 directions (flexion, extension, pronation, supination, radial deviation, and ulnar deviation), whereas the control group did not. Data were collected on the isometric torque control, 1-repetition maximum (1RM) strength, and isokinetic maximum torque (angular velocity of 60° per second wrist movements) before and after 6 weeks of resistance training and at 2-week intervals during training. The training group showed significant decreases in isometric torque control error in all 6 directions after 2 weeks of resistance training, whereas the control group did not show significant increase or decrease. After 4 weeks of training, the training group showed significant increases in maximum strength in all 6 directions as assessed by 1RM strength and isokinetic strength tests, whereas the control group did not show any statistically significant changes. This study shows that motor control significantly improves within the first 2 weeks of resistance training, whereas the wrist strength significantly improves within the first 4 weeks of resistance training. Based on the findings of this study, coaches and trainers should consider wrist resistance training to improve athletes' muscular strength and control of the wrist muscles.

Retrieval and clinical analysis of distraction-based dual growing rod constructs for early-onset scoliosis.

BACKGROUND CONTEXT: Growing rod constructs are an important contribution for treating patients with early-onset scoliosis. These devices experience high failure rates, including rod fractures. PURPOSE: The objective of this study was to identify the failure mechanism of retrieved growing rods, and to identify differences between patients with failed and intact constructs. STUDY DESIGN/SETTING: Growing rod patients who had implant removal and were previously enrolled in a multicenter registry were eligible for this study. PATIENT SAMPLE: Forty dual-rod constructs were retrieved from 36 patients across four centers, and 34 of those constructs met the inclusion criteria. Eighteen constructs failed due to rod fracture. Sixteen intact constructs were removed due to final fusion (n=7), implant exchange (n=5), infection (n=2), or implant prominence (n=2). OUTCOME MEASURES: Analyses of clinical registry data, radiographs, and retrievals were the outcome measures. METHODS: Retrievals were analyzed with microscopic imaging (optical and scanning electron microscopy) for areas of mechanical failure, damage, and corrosion. Failure analyses were conducted on the fracture surfaces to identify failure mechanism(s). Statistical analyses were performed to determine significant differences between the failed and intact groups. RESULTS: The failed rods fractured due to bending fatigue under flexion motion. Construct configuration and loading dictate high bending stresses at three distinct locations along the construct: (1) mid-construct, (2) adjacent to the tandem connector, or (3) adjacent to the distal anchor foundation. In addition, high torques used to insert set screws may create an initiation point for fatigue. Syndromic scoliosis, prior rod fractures, increase in patient weight, and rigid constructs consisting of tandem connectors and multiple crosslinks were associated with failure. CONCLUSION: This is the first study to examine retrieved, failed growing rod implants across multiple centers. Our analysis found that rod fractures are due to bending fatigue, and that stress concentrations play an important role in rod fractures. Recommendations are made on surgical techniques, such as the use of torque-limiting wrenches or not exceeding the prescribed torques. Additional recommendations include frequent rod replacement in select patients during scheduled surgeries.

Development of a clinically relevant impingement test method for a mobile bearing lumbar total disc replacement.

BACKGROUND CONTEXT: Total disc arthroplasty is an alternative therapy to spinal fusion for the treatment of neck or low back pain and is hypothesized to reduce the risk of disease progression to the adjacent spinal levels. Radiographic and retrieval analyses of various total disc replacements (TDRs) have shown evidence of impingement damage. Impingement of TDRs can occur when the device reaches the limits of its functional range of motion, causing contact between peripheral regions of the device. PURPOSE: Impingement can be associated with increased wear and mechanical damage; however, impingement conditions are not simulated in current standardized mechanical bench test methods. This study explored the test conditions necessary to apply clinically relevant impingement loading to a lumbar TDR in vitro. STUDY DESIGN: An experimental protocol was developed and evaluated using in vivo retrievals for qualitative and quantitative validation. METHODS: Retrieval analysis was conducted on a set of 11 size 3 retrieved Charité devices using American Society for Testing and Materials F561 as a guide. The impingement range of motion was determined using a combination of modeling and experiments, and was used as an input in vitro testing. A 1-million cycle in vitro test was then conducted, and the in vitro samples were characterized using methods similar to the retreived devices. RESULTS: All in vitro tested samples exhibited impingement regions and damage patterns consistent with retrieved devices. Consistent with the retrievals, the impingement damage on the rim was a combination of abrasive wear and plastic deformation. Micro computed tomography (microCT) was used to quantitatively assess rim damage due to impingement. Rim penetration was statistically lower in the retrievals when compared with both in vitro groups. Rim elongation was comparable among all groups. The simulated-facet group had statistically greater angular rim deformations than the retrieval group and the no-facet group. CONCLUSIONS: Results demonstrate that clinically relevant impingement seen on mobile bearings of lumbar TDRs can be replicated on the bench.

Anti-Müllerian hormone screening to assess ovarian reserve among female survivors of childhood cancer.

PURPOSE: Anti-Müllerian hormone (AMH) is an indicator of oocyte reserve in healthy females. The role of AMH testing in oncology remains investigational, although its sensitivity and stability over the menstrual cycle make it an attractive screening test for fertility assessment among female cancer survivors. We measured AMH level in survivors of childhood cancer and evaluated its association with treatment and patient factors. METHODS: Participants were adult female survivors of childhood malignancy treated with chemotherapy. Serum AMH was measured at a random day of the menstrual cycle. Multivariate analysis was used to evaluate the association between AMH level, alkylating agent exposure using the cyclophosphamide equivalent dose (CED), and other covariates. RESULTS: Sixty-six females with a median attained age of 23.3 years were eligible for analysis. Median AMH was 25.5 pM (range 0.5-108.0), at a median time of 11.5 years (range 1.4-25.1) since cancer diagnosis. Twenty-three patients (34.8%) had low AMH, including a significant proportion that reported normal menstrual cycles. Compared to ALL survivors, sarcoma survivors had significantly lower AMH levels. Among alkylating agents evaluated, procarbazine had the greatest adverse effect on AMH. In multivariate analysis, higher CED (p = 0.001), older age at diagnosis (p < 0.001), and use of oral contraceptive pills (p = 0.04) remained significantly associated with lower AMH. CONCLUSIONS: Random AMH can reveal evidence of oocyte depletion among female survivors reporting normal cycles, although low AMH should be interpreted cautiously among those taking oral contraception. Age at exposure and CED can aid identification of those more likely to have low AMH, although CED may underestimate the effect of procarbazine on oocyte reserve. IMPLICATIONS FOR CANCER SURVIVORS: Measurement of AMH can reveal apparent depletion of ovarian reserve in female childhood cancer survivors reporting normal menstrual cycles. Sarcoma survivors and those exposed to procarbazine may benefit from targeted AMH evaluation in an outpatient setting, and thereby allow appropriate fertility counseling before the onset of premature ovarian failure. The cyclophosphamide equivalent dose may facilitate comparison of the potential effect of different regimens on fertility.

Salvage radiosurgery for brain metastases: prognostic factors to consider in patient selection.

PURPOSE: Stereotactic radiosurgery (SRS) is offered to patients for recurrent brain metastases after prior brain radiation therapy (RT), but few studies have evaluated the efficacy of salvage SRS or factors to consider in selecting patients for this treatment. This study reports overall survival (OS), intracranial progression-free survival (PFS), and local control (LC) after salvage SRS, and factors associated with outcomes. METHODS AND MATERIALS: This is a retrospective review of patients treated from 2009 to 2011 with salvage SRS after prior brain RT for brain metastases. Survival from salvage SRS and from initial brain metastases diagnosis (IBMD) was calculated. Univariate and multivariable (MVA) analyses included age, performance status, recursive partitioning analysis (RPA) class, extracranial disease control, and time from initial RT to salvage SRS. RESULTS: There were 106 patients included in the analysis with a median age of 56.9 years (range 32.5-82 years). A median of 2 metastases were treated per patient (range, 1-12) with a median dose of 21 Gy (range, 12-24) prescribed to the 50% isodose. With a median follow-up of 10.5 months (range, 0.1-68.2), LC was 82.8%, 60.1%, and 46.8% at 6 months, 1 year, and 3 years, respectively. Median PFS was 6.2 months (95% confidence interval [CI]=4.9-7.6). Median OS was 11.7 months (95% CI=8.1-13) from salvage SRS, and 22.1 months from IBMD (95% CI=18.4-26.8). On MVA, age (P=.01; hazard ratio [HR]=1.04; 95% CI=1.01-1.07), extracranial disease control (P=.004; HR=0.46; 95% CI=0.27-0.78), and interval from initial RT to salvage SRS of at least 265 days (P=.001; HR=2.46; 95% CI=1.47-4.09) were predictive of OS. CONCLUSIONS: This study demonstrates that patients can have durable local control and survival after salvage SRS for recurrent brain metastases. In particular, younger patients with controlled extracranial disease and a durable response to initial brain RT are likely to benefit from salvage SRS.