Electrical protein array chips for the detection of staphylococcal virulence factors.

A new approach for the detection of virulence factors of Staphylococcus aureus and Staphylococcus epidermidis using an electrical protein array chip technology is presented. The procedure is based on an enzyme-linked sandwich immunoassay, which includes recognition and binding of virulence factors by specific capture and detection antibodies. Detection of antibody-bound virulence factors is achieved by measuring the electrical current generated by redox recycling of an enzymatically released substance. The current (measured in nanoampere) corresponds to the amount of the target molecule in the analyzed sample. The electrical protein chip allows for a fast detection of Staphylococcus enterotoxin B (SEB) of S. aureus and immunodominant antigen A homologue (IsaA homologue) of S. epidermidis in different liquid matrices. The S. aureus SEB virulence factor could be detected in minimal medium, milk, and urine in a concentration of 1 ng/ml within less than 23 min. Furthermore, a simultaneous detection of SEB of S. aureus and IsaA homologue of S. epidermidis in a single assay could be demonstrated.

Electrical microarrays for highly sensitive detection of multiplex PCR products from biological agents.

For the sensitive detection of amplicons derived from diagnostic PCR, a novel electrical low-density microarray is applied and compared to state-of-the-art quantitative real-time PCR. The principle of the electrochemical method and the effective use for analysis are described. Interdigitated array gold electrodes (IDA-E) embedded into a silicon chip are the core technology of the fully automated compact biosensor system, basing on enzyme coupled electrochemical detection. The biointerface is built up with thiol-modified capture oligonucleotides on gold and mediates the specific recognition of hybridised target DNA amplified with uniplex or multiplex PCR. In here we show the potential of the designed electrical microarray to function as an advanced screening method for the parallel detection of a panel of the four pathogens Bacillus anthracis, Yersinia pestis, Francisella tularensis and ortho pox viruses (genus), which are among the most relevant biowarfare agents. PCR products, generated from 10 to 50 gene equivalents, have been detected reproducibly. The experiments with varying pathogen amounts showed the good reliability and the high sensitivity of the method, equivalent to optical real-time PCR detection systems. Without PCR the total assay time amounts to 27 min. The advantage of the combination of multiplex-PCR with electrical microarray detection avoiding intensive PCR probe labelling strategies is illustrated.

Automated detection and quantitation of bacterial RNA by using electrical microarrays.

Low-density electrical 16S rRNA specific oligonucleotide microarrays and an automated analysis system have been developed for the identification and quantitation of pathogens. The pathogens are Escherichia coli, Pseudomonas aeruginosa, Enterococcus faecalis, Staphylococcus aureus, and Staphylococcus epidermidis, which are typically involved in urinary tract infections. Interdigitated gold array electrodes (IDA-electrodes), which have structures in the nanometer range, have been used for very sensitive analysis. Thiol-modified oligonucleotides are immobilized on the gold IDA as capture probes. They mediate the specific recognition of the target 16S rRNA by hybridization. Additionally three unlabeled oligonucleotides are hybridized in close proximity to the capturing site. They are supporting molecules, because they improve the RNA hybridization at the capturing site. A biotin labeled detector oligonucleotide is also allowed to hybridize to the captured RNA sequence. The biotin labels enable the binding of avidin alkaline phophatase conjugates. The phosphatase liberates the electrochemical mediator p-aminophenol from its electrically inactive phosphate derivative. The electrical signals were generated by amperometric redox cycling and detected by a unique multipotentiostat. The read out signals of the microarray are position specific current and change over time in proportion to the analyte concentration. If two additional biotins are introduced into the affinity binding complex via the supporting oligonucleotides, the sensitivity of the assays increase more than 60%. The limit of detection of Escherichia coli total RNA has been determined to be 0.5 ng/microL. The control of fluidics for variable assay formats as well as the multichannel electrical read out and data handling have all been fully automated. The fast and easy procedure does not require any amplification of the targeted nucleic acids by PCR.

Computer-aided continuous drug infusion: setup and test of a mobile closed-loop system for the continuous automated infusion of insulin.

For a diabetes mellitus patient, tight control of glucose level is essential. Results are reported of an investigation of the suitability of existing wearable continuous insulin infusors controlled and adjusted by a control algorithm using continuous glucose measurements as input to perform the functionality of an artificial pancreas. Special attention was given to the development of a continuous glucose monitor and to evaluate which quality of input data is necessary for the control algorithm. In clinical trials, it was found that for patients in a controlled environment an autonomously regulating control algorithm leads to an improved adjustment of patient glucose values and less overall insulin infusion as compared with the best fixed preprogrammed insulin infusion profiles of standard pump therapy. For the limited number of cases studied here, functionality of the control algorithm could tolerate some delay between the actual glucose values in the patient interstitial fluid and the algorithm input of up to 30 min. A quasicontinuous glucose measurement delivering actual glucose values every 5-10 min seems to be suited to control an artificial pancreas.

Identification of pathogenic microbial cells and spores by electrochemical detection on a biochip.

BACKGROUND: Bacillus cereus constitutes a significant cause of acute food poisoning in humans. Despite the recent development of different detection methods, new effective control measures and better diagnostic tools are required for quick and reliable detection of pathogenic micro-organisms. Thus, the objective of this study was to determine a simple method for rapid identification of enterotoxic Bacillus strains. Here, a special attention is given to an electrochemical biosensor since it meets the requirements of minimal size, lower costs and decreased power consumption. RESULTS: A bead-based sandwich hybridization system was employed in conjugation with electric chips for detection of vegetative cells and spores of Bacillus strains based on their toxin-encoding genes. The system consists of a silicon chip based potentiometric cell, and utilizes paramagnetic beads as solid carriers of the DNA probes. The specific signals from 20 amol of bacterial cell or spore DNA were achieved in less than 4 h. The method was also successful when applied directly to unpurified spore and cell extract samples. The assay for the haemolytic enterotoxin genes resulted in reproducible signals from B. cereus and B. thuringiensis while haemolysin-negative B. subtilis strain did not yield any signal. CONCLUSIONS: The sensitivity, convenience and specificity of the system have shown its potential. In this respect an electrochemical detection on a chip enabling a fast characterization and monitoring of pathogens in food is of interest. This system can offer a contribution in the rapid identification of bacteria based on the presence of specific genes without preceding nucleic acid amplification.

Electrical detection of viral DNA using ultramicroelectrode arrays.

A fully electrical array for voltammetric detection of redox molecules produced by enzyme-labeled affinity binding complexes is shown. The electronic detection is based on ultramicroelectrode arrays manufactured in silicon technology. The 200-microm circular array positions have 800-nm-wide interdigitated gold ultramicroelectrodes embedded in silicon dioxide. Immobilization of oligonucleotide capture probes onto the gold electrodes surfaces is accomplished via thiol-gold self-assembling. Spatial separation of probes at different array positions is controlled by polymeric rings around each array position. The affinity bound complexes are labeled with alkaline phosphatase, which converts the electrochemically inactive substrate 4-aminophenyl phosphate into the active 4-hydroxyaniline (HA). The nanoscaled electrodes are used to perform a sensitive detection of enzyme activity by signal enhancing redox recycling of HA resulting in local and position-specific current signals. Multiplexing and serial readout is realized using a CMOS ASIC module and a computer-controlled multichannel potentiostat. The principle of the silicon-based electrical biochip array is shown for different experimental setups and for the detection of virus DNA in real unpurified multiplex PCR samples. The fast and quantitative electronic multicomponent analysis for all kinds of affinity assays is robust and particle tolerant.

Electrical biochip technology--a tool for microarrays and continuous monitoring.

Based on electrical biochips made in Si-technology cost effective portable devices have been constructed for field applications and point of care diagnosis. These miniaturized amperometric biosensor devices enable the evaluation of biomolecular interactions by measuring the redox recycling of ELISA products, as well as the electrical monitoring of metabolites. The highly sensitive redox recycling is facilitated by interdigitated ultramicroelectrodes of high spatial resolution. The application of these electrical biochips as DNA microarrays for the molecular diagnosis of viral infections demonstrates the measurement procedure. Self-assembling of capture oligonucleotides via thiol-gold coupling has been used to construct the DNA interface on-chip. Another application for this electrical detection principle is continuous measuring with bead-based biosensors. Here, paramagnetic nanoparticles are used as carriers of the bioanalytical interface in ELISA format. A Si-micromachined glucose sensor for continuous monitoring in interstitial fluid ex vivo shows the flexibility of the electrical platform. Here the novel approach is a pore membrane in micrometer-dimensions acting as a diffusion barrier. The electrochemical detection takes place in a cavity containing glucose oxidase and a Pt-electrode surface. The common hydrogen peroxide detection, together with Si technology, enable precise differential measurements using a second cavity.