Fabrication of mucocompressive splints for free gingival grafts via medical engineering in patients with reconstructed mandibles.

PURPOSE: Acquiring adequate attached mucosa is important in restoring masticatory function with a removable dental prosthesis or dental implant. In patients with inadequate attached mucosa, a free gingival graft (FGG) with a custom stent is used. However, it is challenging to apply the conventional method for fabricating a stent with a reshaped cast in patients with reconstructed mandibles because the reconstructed mandible has limitations due to a titanium mesh, skin flap, and unique bone morphology. In the present report, we have proposed a new design and fabrication process for a mucocompressive splint via medical engineering to acquire the attached mucosa for the prosthodontic treatment of reconstructed mandibles. METHODS: Three-dimensional (3D) craniomandibular models were reconstructed from a computed tomography dataset after mandibular reconstruction. The dentition region was replaced with highly precise scan data of the dental casts using a 3D scanner. The alveolar ridge mucosa and teeth were ideally designed using the 3D model while referring to the anatomical structures. The jig used to fabricate the working dental cast with artificial gum in real space was designed and fabricated using a 3D printer. The alveolar ridge was altered into a simulated configuration on the articulator using a jig. A mucocompressive splint was fabricated on an altered dental cast. The splint was immediately seated on the mandible without any major adjustments after the FGG. CONCLUSION: Adequate attached mucosa for the prosthodontic treatment of a reconstructed mandible was obtained by the pre-surgical fabrication of a mucocompressive splint through medical engineering.

Spatial regulation of the KH domain RNA-binding protein Rnc1 mediated by a Crm1-independent nuclear export system in Schizosaccharomyces pombe.

RNA-binding proteins (RBPs) play important roles in the posttranscriptional regulation of gene expression, including mRNA stability, transport and translation. Fission yeast rnc1+ encodes a K Homology (KH)-type RBP, which binds and stabilizes the Pmp1 MAPK phosphatase mRNA thereby suppressing the Cl- hypersensitivity of calcineurin deletion and MAPK signaling mutants. Here, we analyzed the spatial regulation of Rnc1 and discovered a putative nuclear export signal (NES)Rnc1 , which dictates the cytoplasmic localization of Rnc1 in a Crm1-independent manner. Notably, mutations in the NESRnc1 altered nucleocytoplasmic distribution of Rnc1 and abolished its function to suppress calcineurin deletion, although the Rnc1 NES mutant maintains the ability to bind Pmp1 mRNA. Intriguingly, the Rnc1 NES mutant destabilized Pmp1 mRNA, suggesting the functional importance of the Rnc1 cytoplasmic localization. Mutation in Rae1, but not Mex67 deletion or overproduction, induced Rnc1 accumulation in the nucleus, suggesting that Rnc1 is exported from the nucleus to the cytoplasm via the mRNA export pathway involving Rae1. Importantly, mutations in the Rnc1 KH-domains abolished the mRNA-binding ability and induced nuclear localization, suggesting that Rnc1 may be exported from the nucleus together with its target mRNAs. Collectively, the functional Rae1-dependent mRNA export system may influence the cytoplasmic localization and function of Rnc1.

Computer assisted mandibular reconstruction using a custom-made titan mesh tray and removable denture based on the top-down treatment technique.

PURPOSE: The purpose of this report is to propose a computer assisted mandibular reconstruction procedure, utilizing a custom-made Ti-mesh tray with particulate cancellous bone and marrow, and a removable denture. This procedure was based on the top-down treatment technique, and reviews the case of a representative patient with mandibular continuity defect. METHODS: The patient was a 74-year old female with a chief complaint of facial asymmetry and masticatory dysfunction. Due to gingival carcinoma, she underwent a segmental mandibulectomy on the left mandibule. On the VR space, using 3-D reconstructed computer tomography data, the residual right-side mandibular fragment was repositioned based on the condylar position and the occlusal relation. The mandibular fragment was then mirrored for a central sagittal plane. The position of the mirrored object was slightly arranged with the occlusal relation. Through the above operations, the landmark configuration, for the custom-made Ti-mesh tray as a virtual simulation model, was fabricated. On the physical model, we produced a custom-made Ti-mesh tray with a commercial Ti-mesh sheet. Surgical treatment was carried out using the tray. The denture pattern was designed by a dental technician on the VR space, fabricated using a 3D printer, and modified to create an impression tray with resin. Using the impression, the temporary removable denture was fabricated. CONCLUSIONS: We propose a computer assisted design for a custom-made Ti-mesh tray and a removable denture, based on the Top-down treatment concept. We feel this technique is advantageous in reconstructing functional occlusion, and in accurately regaining dental and facial esthetics.

Surgical Intervention for Masticatory Muscle Tendon-Aponeurosis Hyperplasia Based on the Diagnosis Using the Four-Dimensional Muscle Model.

OBJECTIVES: The surgical target of Masticatory muscle tendon-aponeurosis hyperplasia (MMTAH) is the masseter or temporal muscle. In our clinic, the 4-dimentional muscle model (4DMM) has been used to decide if we should approach to the masseter or temporal muscle. The aim of this study is validate the clinical usefulness of 4DMM on the basis of the surgical results. METHODS: The 4DMM was constructed from the digital data of 3D-CT and 4-dimentional mandibular movements of the patients. It made us to able to visually observe the expansion rate of masticatory muscles at maximum mouth opening comparing to their length at closed mouth position. Fifteen patients were applied the 4DMM before the surgical treatment and 2 healthy volunteers were enrolled as control group. RESULTS: The expansion rate of temporal muscle at the maximum mouth opening in the patient group was significantly less than that in the control group (P < 0.05). On the other hand, the masseter muscles of all patients were expanded as same as the control group. Therefore the main cause of limitation of mouth-opening was suggested to be a contracture of the temporal muscle. Consequently, we performed successful bilateral coronoidectomy with no surgical intervention to the masseter muscles in all patients. CONCLUSION: The present 4DMM would be valuable modality to decide the target muscle of surgical treatment for patients with MMTAH. In this pathology, contracture of the temporal muscle seems to be main cause of limited mouth opening.

Application of photogrammetry for analysis of occlusal contacts.

INTRODUCTION: The conventional 2D-analysis methods for occlusal contacts provided limited information on tooth morphology. This present study aims to detect 3D positional information of occlusal contacts from 2D-photos via photogrammetry. We propose an image processing solution for analysis of occlusal contacts and facets via the black silicone method and a photogrammetric technique. MATERIALS AND METHODS: The occlusal facets were reconstructed from a 2D-photograph data-set of inter-occlusal records into a 3D image via photogrammetry. The configuration of the occlusal surface was reproduced with polygons. In addition, the textures of the occlusal contacts were mapped to each polygon. DIFFERENCE FROM CONVENTIONAL METHODS: Constructing occlusal facets with 3D polygons from 2D-photos with photogrammetry was a defining characteristic of this image processing technique. It allowed us to better observe findings of the black silicone method. Compared with conventional 3D analysis using a 3D scanner, our 3D models did not reproduce the detail of the anatomical configuration. However, by merging the findings of the inter-occlusal record, the deformation of mandible and the displacement of periodontal ligaments under occlusal force were reflected in our model. EFFECT OR PERFORMANCE: Through the use of polygons in the conversion of 2D images to 3D images, we were able to define the relation between the location and direction of the occlusal contacts and facets, which was difficult to detect via conventional methods. CONCLUSION: Through our method of making a 3D polygon model, the findings of inter-occlusal records which reflected the jaw/teeth behavior under occlusal force could be observed 3-dimensionally.

Influence of filler on bite impression material in transillumination method for occlusal examination.

The purpose of this present study was to investigate the influence of material filler and RGB values' fluctuation on creating a calibration curve, which indicates the relationship between material thickness and transmitted light brightness using the transillumination method. Creating the calibration curves were carried out through the following three methods; 1) the conventional method creates the calibration curve with a formula of thickness, 2) the maximum value method, with samples of a specified thickness, and 3) the actual value method, with a microscope. Furthermore, the reliability of each curve was verified via scanned artificial tooth data. In addition, the characteristics of light decrement were investigated. From our results, it was suggested that the filler diameter must be considered when the calibration curve is created using the bite impression material with a filler. In addition, it was suggested that the RGB values' fluctuation did not influence the calibration curve.

Influence of metal artifacts on the creation of individual 3D cranio-mandibular models.

In our clinic, the four-dimensional analysis of mandibular movement has mainly been used to diagnose jaw function disorders. In present, we are considering its application for patients with occlusal issues. Consequently, an improvement in system accuracy is required. However, metal artifacts cause distortions in the 3D-cranio-mandibular model construction process, which leads to accuracy concerns. The purpose of this present study was to grasp the accuracy differences caused by the oral metal restorations in reconstructed 3D-cranio-mandibular models from CT data, and scanned dentition models. The accuracy of the reconstruction was confirmed from comparing the occlusal contacts in VR space and real space. The VR contact areas in the dry skulls without and moderate restoration showed a close similarity to real occlusal contacts. However, the VR contact areas in the dry skull with numerous restorations was not similar to the real contacts. From these results, it is considered that metal artifacts decrease the accuracy of model reconstruction.

Investigation of trends and characteristics in patients with obstructive sleep apnea.

BACKGROUND: Oral appliance (OA) therapy for obstructive sleep apnea (OSA) has only been part of Japan's National Health care coverage plan since 2004. Subsequently, not enough time has passed to establish the medical trends and characteristics of OSA patients in Japanese Dental Hospitals. AIM: The aim of this study was to investigate the medical trends and the characteristics in patients with OSA who visited our clinic, and to compare our findings with previous studies. SETTING AND DESIGN: Epidemiological survey (retrospective study). MATERIALS AND METHODS: Two hundred and one patients were recruited at the Internal Medicine Division in the Tsurumi University Dental Hospital from February 2006 to December 2008, consecutively. Patients received a medical interview, and a detailed sleep analysis that included a polysomnography (PSG) to verify the exact nature of their condition. The efficacy of OA was assessed in 49 patients who wore an OA and underwent PSG. RESULTS: Of all subjects, 141 patients visited the Prosthodontic Division to receive OA therapy, 38 patients were treated or received a follow up examination in the Internal Medicine Division. The dropout rate was 10.4% in the all subjects, 17.0% in patients who visited the Prosthodontic Division. The male-to-female ratio was 3.3:1, 3.0:1 in patients who visited the Prosthodontic Division. In addition, females had a lower rate of OAS severity than males. In our patients, the major complication was hypertension and cardiac disease. The success rate of OA was 75.5%. CONCLUSION: This approach allowed us to reveal some of the trends and characteristics in our patients.

Characteristics of mandibular movements in patients with square mandible.

OBJECTIVE: The aim was to report the kinetics of masticatory muscles using a 4-dimensional muscle model and kinetically investigate the etiology of square mandible (SQM) in vivo. STUDY DESIGN: To ascertain the mandibular movements in patients with SQM, we compared a group of 11 SQM patients with painless limited mouth opening to a matched group of 11 healthy volunteers who acted as control subjects. Mandibular movements were recorded using a 6-degrees-of-freedom jaw-tracking device, with the incisal and kinematic condylar as analytic points. RESULTS: For the control group, mean tracking distance for the incisal point was 50.1 +/- 6.8 mm, whereas for the SQM group mean tracking distance was 27.1 +/- 2.8 mm. With lateral excursions, the control group's mean tracking distance of the incisal point was 9.9 +/- 2.01 mm, and the SQM group's was 8.1 +/- 1.64 mm. CONCLUSION: Despite a sufficient lateral excursion, motion of the mandible was limited by some factors at opening and suggests that the mode of lateral movements in SQM patients may differ slightly from those in healthy individuals.

[Application of a jaw motion tracking device that measures six degrees of freedom using optoelectronic].

PURPOSE: A jaw motion tracking device that measures six degrees of freedom has recently been developed. Understanding jaw motion is useful, but previous measurement methods were impractical for use in dental clinics. The overall aim of this study was to demonstrate the simple operation, low cost, and high precision of a recently developed jaw tracking device. In addition, this study explored its potential clinical applications. METHODS: In this study, we compared two jaw motion tracking devices: a digital system type of device and an optical type of device. First we established a baseline occlusal plane from which to measure jaw motion in the same subject with both devices. The jaw motion signals were sampled at a frequency of 100 Hz. The subjects were three healthy women (mean age +/- SD = 26.3 +/- 1.2 years) who were recruited from among the crown-and-bridge faculty of Tsurumi University of Dentistry. The jaw motions measured were open-close movement, sagittal border movement, and frontal border movement. In addition, the kinematic axis point was calculated from the sagittal border movement. Data from the digital system type of device and data from the optical device were compared. The data were selected to measure rotation and translocation, i.e. jaw position about protrusion, both laterotrusion and maximal opening of the mouth. RESULTS: The root mean square (RMS) error of position measurement was 0.163 mm with MM-JI-E and 0.178 mm with the optical type of device. The RMS error of jaw motion measurement with the optical type of device was maximum at 0.8mm and minimum at 0.1mm. This was similar to that with digital system type of jaw motion tracking device. CONCLUSION: This study showed the possibility of developing clinical applications for this jaw motion device.