Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros










Intervalo de ano de publicação
1.
Braz. j. pharm. sci ; 46(1): 91-98, Jan.-Mar. 2010. graf, tab
Artigo em Inglês | LILACS | ID: lil-548739

RESUMO

Two simple, sensitive, selective and inexpensive spectrophotometric methods are described for the determination of simvastatin (SMT) in bulk drug and in tablets using permanganate as the oxidimetric reagent. In method A, SMT is treated with a measured excess of permanganate in acetic acid medium and the unreacted oxidant is measured at 550 nm, whereas in method B the reaction is carried out in alkaline medium and the resulting manganate is measured at 610 nm. In method A, the amount of permanganate reacted corresponds to the SMT content and the absorbance is found to decrease linearly with the concentration; and in method B, the absorbance increases with concentration. The working conditions of assays were optimized, and the methods were validated according to the current ICH guidelines. Under optimum conditions, SMT could be assayed in the concentration ranges, 1.47 - 17.67x10-5 and 2.27 - 27.18 x10-6 mol/L by method A and method B, respectively. The calculated molar absorptivities are 3.2 x 10³ and 2.5 x 10(4) L/mol/cm for method A and method B, respectively with corresponding Sandell sensitivity values of 0.0387 and 0.0178 μg/cm². The limits of detection (LOD) and quantification (LOQ) have also been reported. Accuracy and precision for the assay were determined by calculating the intra-day and inter-day at three concentrations; the intra-day RSD was < 2 percent and the accuracy was better than 2.15 percent (RE). The methods were applied successfully for the determination of SMT in tablet dosage form with a high percentage of recovery, good accuracy and precision, and without measurable interference by the excipients. The accuracy was further ascertained from placebo and synthetic mixture analysis and also from the spike-recovery method.


Dois métodos espectrofotométricos simples, sensíveis, seletivos e baratos são descritos para a determinação de sinvastatina (SMT) a granel e em comprimidos, utilizando permanganato como reagente oxidimétrico. No método A, a SMT é tratada com excesso conhecido de permanganato em meio de ácido acético e o oxidante que não reage é medido a 550 nm, enquanto no método B, a reação é efetuada em meio alcalino e o manganato resultante é medido a 610 nm. No método A, a quantidade de permanganato que reage corresponde ao conteúdo de SMT e a absorbância diminui linearmente com o aumento da concentração; no método B, a absorbância aumenta com o aumento da concentração. As condições de trabalho do ensaio foram otimizadas e os métodos, validados de acordo com as normas do ICH. Sob condições ótimas, a SMT pode ser ensaiada nas faixas de concentração de 1,47- 17,67x10-5 e de 2,27-27,18 x10-6 mol/L pelo método A e B, respectivamente. As absortividades molares calculadas são 2 x 10³ e 2,5 x 10(4) L/ mol/cm, respectivamente, para os métodos A e B, com os valores correspondentes de sensibilidade de Sandell de 0,0387 e 0,0178 μg/cm². Os limites de detecção (LOQ) também foram relatados. A exatidão e a precisão do ensaio foram determinadas pelo cálculo de três concentrações intra- e inter-dia; a RSD intra-dia foi <2 por cento e a exatidão foi melhor que 2,15 por cento (RE). Os métodos foram aplicados com sucesso à determinação de SMT em comprimidos com alta porcentagem de recuperação, boa exatidão e precisão e sem interferência mensurável dos excipientes. A exatidão foi posteriormente determinada no placebo e na mistura sintética e, também, pelo método de spike recovery.


Assuntos
Espectrofotometria/métodos , Permanganato de Potássio/química , Sinvastatina/análise , Compostos de Manganês/química , Indicadores e Reagentes , Preparações Farmacêuticas
2.
Arch Pharm Res ; 32(9): 1271-9, 2009 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-19784584

RESUMO

Two simple and sensitive spectrophotometric methods are described for the determination of raloxifene hydrochloride (RLX) in pure form and in tablets. The first method (method A) is based on the formation of a yellowish-brown chromogen peaking at 430 nm when RLX was reacted with permanganate in acetic acid medium. In the second method (method B), RLX was reacted with a measured excess of permanganate in H2SO4 medium followed by the spectrophotometric measurement of the unreacted KMnO4 at 550 nm. Under the optimized experimental conditions, Beer's law is obeyed in the concentration range 0.6-6.0 and 1.5-15.0 microg mL(-1) with molar absorptivity of 7.01 x 10(4) and 2.8 x 10(4) L mol(-1) cm(-1) for method A and method B, respectively. The limits of detection (LOD) and quantification (LOQ) have also been reported. The intra-day and inter-day RSD and RE values at three different concentrations were assessed. The proposed methods were applied to the commercially available tablets, and the results were statistically compared with those of the reference method. The accuracy and reliability of the methods were further ascertained by recovery studies.


Assuntos
Cloridrato de Raloxifeno/análise , Espectrofotometria/métodos , Compostos de Manganês/química , Óxidos/química , Comprimidos
3.
Chem Pharm Bull (Tokyo) ; 56(3): 383-4, 2008 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-18310954

RESUMO

Tritylated tetrazole of 2a underwent unusual detritylation under basic reaction condition during the synthesis of methyl ether of olmesartan medoxomil 1. The unusual detritylation was found to be a common feature in the case of all tetrazole containing Sartan molecules (3-7).


Assuntos
Bloqueadores do Receptor Tipo 1 de Angiotensina II/química , Tetrazóis/química , Cromatografia em Camada Fina , Imidazóis/química , Marcação por Isótopo , Trítio/química
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...