The Accuracy of a Portable Accelerometer-Based Navigation System for Tibial Alignment Can be Reliable during Total Knee Arthroplasty for Obese Patients.

A portable accelerometer-based navigation system can be useful for achieving the target alignment. Tibial registration is based on the medial and lateral malleoli; however, the identification of landmarks may be difficult in obese (body mass index [BMI] >30 kg/m2) patients whose bones are not easily palpable from the body surface. This study compared tibial component alignment achieved using a portable accelerometer-based navigation system (Knee Align 2 [KA2]) in obese and control groups and aimed to validate the accuracy of bone cutting in obese patients. A total of 210 knees that underwent primary total knee arthroplasty using the KA2 system were included. After 1:3 propensity score matching, there were 32 and 96 knees in the BMI >30 group (group O) and BMI ≤30 group (group C), respectively. The absolute deviations of the tibial implant from the intended alignment were evaluated in the coronal plane (hip-knee-ankle [HKA] angle and medial proximal tibial angle) and sagittal plane (posterior tibial slope [PTS]). The inlier rate of each cohort, which was defined as tibial component alignment within 2 degrees of the intended alignment, was investigated. In the coronal plane, the absolute deviations of the HKA and MPTA from the intended alignment were 2.2 ± 1.8 degrees and 1.8 ± 1.5 degrees in group C and 1.7 ± 1.5 degrees and 1.7 ± 1.0 degrees in group O (p = 1.26, and p = 0.532). In the sagittal plane, the absolute deviations of the tibial implant were 1.6 ± 1.2 degrees in group C and 1.5 ± 1.1 degrees in group O (p = 0.570). The inlier rate was not significantly different between group C and group O (HKA: 64.6 vs. 71.9%, p = 0.521; MPTA: 67.7 vs. 78.1%, p = 0.372; PTS: 82.2 vs. 77.8%, p = 0.667). The accuracy of tibial bone cutting for the obese group was comparable to that of the control group. An accelerometer-based portable navigation system can be useful when attempting to achieve the target tibial alignment in obese patients. LEVEL OF EVIDENCE: Level IV.

Return-to-Sport Rate, Type of Sport, Frequency of Participation, and Patient Satisfaction After Elective Spinal Surgery in the Elderly Population.

Background: The number of elderly sports participants is increasing, and the possibility of return to sport (RTS) has become an important part of surgical decision making in this population. Purpose: To investigate RTS after elective spinal surgery in elderly patients. Study Design: Case series; Level of evidence, 4. Methods: We enrolled patients aged ≥65 years with a history of preoperative or preinjury sports participation who underwent elective spinal surgery at a single institution between 2019 and 2021. At minimum 12-month follow-up, a questionnaire was administered to each participant to assess postoperative RTS, timing of return, frequency and type of pre- and postoperative activities, and satisfaction (scored 1-10). Descriptive statistical analyses were performed, and regression models were developed to examine the influence of age and sex, as well as surgical site, on RTS. Results: A total of 53 patients (mean ± SD age, 73.8 ± 5.2 years; 24 women) were included, and 23 (43.4%) returned to sports at a median 6 months (interquartile range, IQR, 2-6 months). The RTS rate by surgical site was 17 of 34 (50%) for the lumbar spine and 6 of 17 (35.3%) for the cervical spine. There were no statistically significant differences in RTS rate by surgical site, age, or sex. Overall, 6 of 17 patients returned to golf, 4 of 6 to dance, 2 of 5 to swimming, and 1 of 5 to tennis. Of patients who returned, 34.8% participated in sports 5 times per week and 26.1% participated 3 times per week. The median satisfaction score after RTS was 8 (IQR, 6-9). Conclusion: RTS after spinal surgery was achieved in 43% patients at 1-year minimum follow-up, with high satisfaction scores. More than half of the returning patients participated in sports activities ≥3 times per week.

Irreducible Chronic Volar Dislocation of the Distal Radioulnar Joint After Surgery for Distal Radius Fracture: A Case Report.

CASE: We report a case of irreducible chronic volar dislocation of the distal radioulnar joint (DRUJ) after surgery for distal radius fracture. The patient underwent volar locking plate fixation for distal radius fracture. Despite the satisfactory alignment of the distal radius, irreducible volar dislocation of the DRUJ was discovered at 5 weeks after the initial surgery. DRUJ reconstruction at 9 weeks after injury using the Adams-Berger procedure resulted in a stable and functional DRUJ and wrist. CONCLUSION: To prevent postoperative DRUJ instability or dislocation, the DRUJ should be evaluated for stability immediately after fracture fixation.

Arthroscopic treatment for Morel-Lavallée lesion of the thigh: A case report and literature review.

INTRODUCTION: Morel-Lavallée lesion (MLL) is a posttraumatic closed degloving soft tissue injury, in which the subcutaneous tissues are separated from the underlying fascia. Surgical treatment is recommended if conservative management fails. The conventional surgical treatment for the lesion is surgical drainage and debridement. PRESENTATION OF CASE: A 51-year-old male patient presented with swelling of the right thigh incurred during a traffic accident. The lesion was diagnosed with MLL. The MLL was successfully treated with a minimally invasive arthroscopic treatment after failure of conservative treatment. The arthroscopic treatment was chosen because of the patient's comorbidity that posed a risk of surgical wound complications. In addition, negative pressure wound therapy (NPWT) was performed postoperatively to ensure healing and to prevent recurrence of the lesion. The patient was successfully treated and the healing of the lesion was also confirmed with MRI. DISCUSSION: In a patient with a risk of wound complications due to a comorbidity, this minimally invasive arthroscopic treatment is useful. In addition, NPWT was used to ensure healing and to prevent recurrence. Although the use of NPWT combined with endoscopic treatment has not been reported, additional NPWT reported in this case may be helpful to ensure healing. CONCLUSION: In case of MLL with a risk of surgical complications, the arthroscopic treatment is a reasonable method and achieves the goal of an open surgical debridement without increased morbidity.

Clinical outcome of anatomic double-bundle ACL reconstruction and 3D CT model-based validation of femoral socket aperture position.

PURPOSE: The purpose of this study was to evaluate the clinical results of anatomic double-bundle (DB) anterior cruciate ligament (ACL) reconstruction in which anatomic position of femoral socket apertures was validated using three-dimensional (3D) computed tomography (CT) modelling. METHODS: Anatomic DB ACL reconstructions with hamstring autografts were performed in 34 patients. Two femoral sockets were created through a far anteromedial (AM) portal behind the lateral intercondylar ridge with the assistance of intraoperative 3D fluoroscopic navigation. Femoral tunnel aperture positioning was investigated postoperatively using 3D CT images in all patients. Clinical results were also evaluated subjectively and objectively at least up to 2 years. RESULTS: Measurement of the AM and the posterolateral (PL) femoral socket locations on the 3D CT images using the quadrant method showed that the centre of the AM socket aperture was located at a depth of 21.0 ± 4.1% and a height of 30.5 ± 9.3% and that of the PL socket aperture was located at a depth of 31.3 ± 5.8% and a height of 57.2 ± 7.7%. The femoral socket locations were considered as anatomic in accordance with previous cadaveric studies examining the positions of ACL femoral insertion site. Subjectively, the mean Lysholm score was 96.9 ± 4.0 points. According to IKDC final objective scores, 26 knees (76%) were objectively graded as normal, 8 (24%) as nearly normal, and 0 (0%) as abnormal or severely abnormal. Postoperative side-to-side anterior translation measured with a KT-2000 arthrometer averaged 0.7 ± 1.2 mm. CONCLUSIONS: DB ACL reconstructions in which femoral socket apertures were validated anatomically using 3D CT provided satisfactory short-term results. LEVEL OF EVIDENCE: Case series, Level IV.

Iliotibial band irritation caused by the EndoButton after anatomic double-bundle anterior cruciate ligament reconstruction: report of two cases.

Two patients underwent arthroscopic anatomic double-bundle anterior cruciate ligament (ACL) reconstruction using the EndoButton for femoral fixation. The femoral tunnels were created by the inside-out technique through a far anteromedial portal. The patients postoperatively developed moderate lateral knee pain without instability. At the second-look arthroscopic evaluation, the two EndoButtons were removed. Both patients were completely asymptomatic several months after implant removal, implying that the EndoButtons caused the mechanical irritation in the iliotibial band. This is the first report describing removal of EndoButtons because of pain caused by friction with the iliotibial band. In anatomic ACL reconstruction, if the femoral tunnel exit is positioned near the lateral femoral epicondyle, care should be taken to prevent iliotibial band friction syndrome that could result because of the EndoButton.

Three-dimensional fluoroscopic navigation guidance for femoral tunnel creation in revision anterior cruciate ligament reconstruction.

Revision anterior cruciate ligament (ACL) reconstruction is accompanied by several technical challenges that must be addressed, such as a primary malpositioned bone tunnel, pre-existing hardware, or bone defects due to tunnel expansion. We describe a surgical technique used to create an anatomic femoral socket using a 3-dimensional (3D) fluoroscopy-based navigation system in technically demanding revision cases. After a reference frame is rigidly attached to the femur, an intraoperative image of the distal femur is obtained, which is transferred to a navigation system and reconstructed into a 3D image. A navigation computer helps the surgeon to visualize the whole image of the lateral wall of the femoral notch, even if the natural morphology of the intercondylar notch has been destroyed by the primary procedure. In addition, the surgeon can also confirm the position of the previous bone tunnel aperture, the previous exit of the femoral tunnel, and the presence of any pre-existing hardware on the navigation monitor. When a new femoral guidewire for the revision procedure is placed, the virtual femoral tunnel is overlaid on the reconstructed 3D image in real time. At our institution, 12 patients underwent 1-stage revision ACL procedures with the assistance of this computer navigation system, and the grafts were securely fixed in anatomically created tunnels in all cases. This technology can assist surgeons in creating anatomic femoral tunnels in technically challenging revision ACL reconstructions.

Immunohistological analysis of extracted anterior cruciate ligament graft impinged against posterior cruciate ligament.

A young female athlete suffered from the residual instability of the knee after anterior cruciate ligament (ACL) reconstruction with hamstring autograft. The 3-dimensional (3-D) CT scan showed the "high noon" positioning of the primary femoral bone tunnel. The revision surgery with anatomic double-bundle technique was performed two years after the primary surgery and the femoral tunnels were created with the assistance of the 3-D fluoroscopy-based navigation. An arthroscopic examination confirmed the ACL graft impingement against posterior cruciate ligament (PCL) when the knee was deeply flexed. The histological analysis of the resected primary ACL graft showed local inflammatory infiltration, enhanced synovial coverage and vascularization at the impinged site. The enhanced expression of vascular endothelial growth factor (VEGF) at the impinged area when compared with non-impinged area was observed on immunohistochemical analysis. Abnormal mechanical stress by the impingement against PCL might have induced chronic inflammation and VEGF overexpression.

Anatomical placement of double femoral tunnels in anterior cruciate ligament reconstruction: anteromedial tunnel first or posterolateral tunnel first?

PURPOSE: The purpose of this study was to know which tunnel--the anteromedial (AM) bundle or the posterolateral (PL) bundle--should be prepared first to create the 2 femoral tunnels accurately in anatomic double-bundle (DB) anterior cruciate ligament (ACL) reconstruction. METHODS: Thirty-four patients were divided into 2 groups of 17 depending on the sequence of preparation of the 2 femoral tunnels. In group A, the AM tunnel was prepared first, whereas the PL tunnel was prepared first in group P. ACL reconstruction was performed using a three-dimensional (3-D) fluoroscopy-based navigation system to place the double femoral tunnels through an accessory medial portal. The double femoral socket positioning was evaluated by 3-D computed tomography (CT) scan image. RESULTS: The non-anatomical placement of the femoral sockets occurred in 5 patients (29%) in group A, whereas the 2 sockets were placed anatomically in all patients in group P (P < 0.05). Evaluation of the AM and the PL socket location on the 3-D CT images using the quadrant method showed more similar values to the laboratory data in a literature in group P than in group A. No complication occurred in group A, whereas complications such as socket communications or back wall blowout occurred in 5 patients (29%) in group P (P < 0.05). CONCLUSION: The sequence of creating 2 femoral tunnels through accessory medial portal affected the resultant location of the sockets and the rate of the complications. When femoral tunnels are prepared with a transportal technique, PL tunnel first technique seems to be superior to AM first technique regarding anatomic placement. However, PL tunnel first technique accompanies the risk of socket communication.