Role of inorganic layers on polysulfide decomposition at sodium-metal anode surfaces for room temperature Na/S batteries.

Sodium metal is a promising anode material for room-temperature sodium sulfur batteries. Due to its high reactivity, typical liquid electrolytes (e.g. carbonate-based solvents and a Na salt) can undergo reduction to form a solid electrolyte interphase (SEI) layer, with inorganic components such as Na2CO3, Na2O, and NaOH, covering the anode surface along with other SEI organic products. One of the challenges is to understand the effect of the SEI film on the decomposition of soluble sodium polysulfide molecules (e.g., Na2S8) upon shuttling from the cathode to anode during battery cycling. Here, we use ab initio molecular dynamics (AIMD) simulations to study the role of an inorganic SEI used as a model passivation layer in polysulfide decomposition. Compared to other film chemistries, it is found that the Na2CO3 film can suppress decomposition with the slowest reduction rate and the smallest amount of charge transfer towards Na2S8. The Na2CO3 film can maintain its structural properties during the simulations. In contrast, Na2O and NaOH allow some decomposed polysulfide fragments to be inserted into the SEI layer. Moreover, the decomposition of Na2S8 on both Na2O and NaOH SEI layers is more reactive with more charge transfer to Na2S8 when compared to that of Na2CO3. Thus, the ability of the SEI to suppress polysulfide decomposition is in the order: Na2CO3 > NaOH ∼ Na2O. Analyses of the density of states reveal that the Na2S8 molecule receives electrons from the Na metal directly in the presence of n-type semiconductor films of Na2CO3 and NaOH, while the charge migration behavior is different in a p-type semiconductor Na2O with the SEI film donating its electrons to the polysulfide solely. Thus, this work adds new insights into charge transfer behavior of inorganic thin film SEIs that could be present at the initial stages of SEI formation.

Polysulfide cluster formation, surface reaction, and role of fluorinated additive on solid electrolyte interphase formation at sodium-metal anode for sodium-sulfur batteries.

Room-temperature sodium-sulfur batteries are promising next-generation energy storage alternatives for electric vehicles and large-scale applications. However, they still suffer from critical issues such as polysulfide shuttling, which inhibit them from commercialization. In this work, using first-principles methods, we investigated the cluster formation of soluble Na2S8 molecules, the reductive decomposition of ethylene carbonate (EC) and propylene carbonate (PC), and the role of fluoroethylene carbonate (FEC) additive in the solid electrolyte interphase formation on the Na anode. The clustering of Na2S8 in an EC solvent is found to be more favorable than in a PC solvent. In the presence of an electron-rich Na (001) surface, EC decomposition undergoes a two-electron transfer reaction with a barrier of 0.19 eV for a ring-opening process, whereas PC decomposition is difficult on the same surface. Although the reaction kinetics of an FEC ring opening in the EC and PC solvents are quite similar, the reaction mechanisms of the open FEC are found to be different in each solvent, although both lead to the production of NaF on the surface. The thick NaF layers reduce the extent of charge transfer to Na2S8 at the anode/electrolyte interface, thus decelerating the Na2S8 decomposition reaction. Our results provide an atomistic insight into the interfacial phenomena between the Na-metal anode surface and electrolyte media.

Insight into the Roles of Metal Loading on CO2 Photocatalytic Reduction Behaviors of TiO2.

The photocatalytic reduction of carbon dioxide (CO2) into value-added chemicals is considered to be a green and sustainable technology, and has recently gained considerable research interest. In this work, titanium dioxide (TiO2) supported Pt, Pd, Ni, and Cu catalysts were synthesized by photodeposition. The formation of various metal species on an anatase TiO2 surface, after ultraviolet (UV) light irradiation, was investigated insightfully by the X-ray absorption near edge structure (XANES) technique. CO2 reduction under UV-light irradiation at an ambient pressure was demonstrated. To gain an insight into the charge recombination rate during reduction, the catalysts were carefully investigated by the intensity modulated photocurrent spectroscopy (IMPS) and photoluminescence spectroscopy (PL). The catalytic behaviors of the catalysts were investigated by density functional theory using the self-consistent Hubbard U-correction (DFT+U) approach. In addition, Mott-Schottky measurement was employed to study the effect of energy band alignment of metal-semiconductor on CO2 photoreduction. Heterojunction formed at Pt-, Pd-, Ni-, and Cu-TiO2 interface has crucial roles on the charge recombination and the catalytic behaviors. Furthermore, it was found that Pt-TiO2 provides the highest methanol yield of 17.85 µmol/gcat/h, and CO as a minor product. According to the IMPS data, Pt-TiO2 has the best charge transfer ability, with the mean electron transit time of 4.513 µs. We believe that this extensive study on the junction between TiO2 could provide a profound understanding of catalytic behaviors, which will pave the way for rational designs of novel catalysts with improved photocatalytic performance for CO2 reduction.

Electronic and thermodynamic properties of native point defects in V2O5: a first-principles study.

The formation of native point defects in semiconductors and their behaviors play a crucial role in material properties. Although the native defects of V2O5 include vacancies, self-interstitials, and antisites, only oxygen vacancies have been extensively explored. In this work, we carried out first-principles calculations to systematically study the properties of possible native defects in V2O5. The electronic structure and the formation energy of each defect were calculated using the DFT+U method. Defect concentrations were estimated using a statistical model with a constraint of charge neutrality. We found that the vanadyl vacancy is a shallow acceptor that could supply holes to the system. However, the intrinsic p-type doping in V2O5 hardly occurred because the vanadyl vacancy could be readily compensated by the more stable donor, i.e., the oxygen vacancy and oxygen interstitial, instead of holes. The oxygen vacancy is the most dominant defect under oxygen-deficient conditions. However, under extreme O-rich conditions, a deep donor of oxygen interstitial becomes the major defect species. The dominant oxygen vacancy under synthesized conditions plays an important role in determining the electronic conductivity of V2O5. It induces the formation of compensating electron polarons. The polarons are trapped at V centers close to the vacancy site with the effective escaping barriers of around 0.6 eV. Such barriers are higher than that of the isolated polaron hopping (0.2 eV). The estimated polaron mobilities obtained from kinetic Monte Carlo simulations confirmed that oxygen vacancies act as polaron-trapping sites, which diminishes the polaron mobility by 4 orders of magnitude. Nevertheless, when the sample is synthesized at elevated temperatures, a number of thermally activated polarons in samples are quite high due to the high concentrations of oxygen vacancies. These polarons can contribute as charge carriers of intrinsic n-type semiconducting V2O5.

Electrochemical oxidation of resorcinol: mechanistic insights from experimental and computational studies.

This work investigates the mechanisms of resorcinol oxidation by density functional theory (DFT) calculation and cyclic voltammetry measurements. Complementary data from experimental and computational studies provide new insights into the reaction mechanisms. At both macro- and micro-electrodes, cyclic voltammetry of resorcinol is chemically and electrochemically irreversible over the whole pH range (1-14). Resorcinol molecules undergo a 1H+ 1e- oxidation at pH < pK a1 and a 1e- oxidation at pH > pK a2 to form radicals. The radicals then readily react to form dimers/polymers deposited on the electrode surface. All of the experimental findings are consistent with the proposed mechanisms, including the apparent transfer coefficient (ß) of 0.6 ± 0.1, the slope of the peak potential (E p) against pH of -54 mV pH-1, the peak-shaped responses at micro-electrodes, and the fouling of the electrodes upon the oxidation of resorcinol. DFT calculation of the reaction energy of elementary steps and the eigenvalues of the highest occupied molecular orbital (HOMO) of the radical intermediates confirms that the (1H+) 1e- oxidation is the energetically favorable pathway. In addition to mechanistic insights, an electrochemical sensor is developed for resorcinol detection at microelectrodes in low ionic strength samples with the sensitivity of 123 ± 4 nA µM-1 and the limit of detection (3 sB m-1) of 0.03 µM.

Transport properties of electron small polarons in a V2O5 cathode of Li-ion batteries: a computational study.

Employing the first-principles plane-wave approach, we explored the behavior of electron transport in the V2O5 cathode. Polaron migrations along different crystallographic directions in the presence and absence of Li+ ions were systematically examined using linear interpolation (LE) and nudged elastic band (NEB) methods. We find that the NEB calculations, based on structural optimizations of TS structures, generally exhibit lower hopping barriers than those obtained from the LE calculations. Both methods consistently predict that the [010] hopping, in the presence and absence of a nearby Li+ ion, is kinetically least favorable since the migration involves displacements of rigid 3-coordinated O atoms. Computations based on the LE method reveal anisotropic polaron mobilities where the estimated hopping frequencies within the layer are approximately one order of magnitude higher than the normal. The prediction based on the LE calculations is consistent with the experimental results. Lithiation dramatically affects the behavior of polaron movement. It significantly increases the reaction energies and hopping barriers due to the strong polaron-ion interaction. In addition, it is predicted that polaron hopping in the V2O5 cathode is non-adiabatic where lithiation has negligible effects on the adiabaticity.

On the Role of Sulfur for the Selective Electrochemical Reduction of CO2 to Formate on CuS x Catalysts.

The efficient electroreduction of CO2 has received significant attention as it is one of the crucial means to develop a closed-loop anthropogenic carbon cycle. Here, we describe the mechanistic workings of an electrochemically deposited CuS x catalyst that can reduce CO2 to formate with a Faradaic efficiency (FEHCOO-) of 75% and geometric current density ( jHCOO-) of -9.0 mA/cm2 at -0.9 V versus the reversible hydrogen electrode. At this potential, the formation of other CO2 reduction products such as hydrocarbons and CO was notably suppressed (total FE < 4%). The formate intermediate (HCOO*) was identified by operando Raman spectroscopy with isotopic labeling. A combination of electrochemical and materials characterization techniques revealed that the high selectivity toward formate production can be attributed to the effect of S dopants on the Cu catalyst, rather than surface morphology. Density functional theory calculations showed that the presence of sulfur weakens the HCOO* and *COOH adsorption energies, such that the formation of *COOH toward CO is suppressed, while the formation of HCOO* toward formate is favored.

Origin of Nb2 O5 Lewis Acid Catalysis for Activation of Carboxylic Acids in the Presence of a Hard Base.

The Nb2 O5 surface catalyzes the amidation of carboxylic acids with amines through Nb5+ Lewis acid activation of the C=O group. In this work, DFT calculations were applied to theoretically investigate the C=O bond activation of a model carboxylic acid (acetic acid) on θ-Al2 O3 (110), anatase TiO2 (101), and T-Nb2 O5 (100) surfaces. The adsorption sites, adsorption energies, reaction energy barriers, electronic properties, and vibrational frequency of acetic acid were examined in detail. It was found that the bond activation of the carbonyl group is most efficient on Nb2 O5 , although the adsorption energy is larger on Al2 O3 and TiO2 . The most efficient C=O bond activation on Nb2 O5 results in the lowest energy barrier of C-N bond formation during amidation. The Nb2 O5 surface also shows larger tolerance to methylamine and water molecules than Al2 O3 and TiO2 surfaces. These crucial factors contribute to the highest amidation catalytic reactivity on Nb2 O5 . Furthermore, the position of the mean density of states of the d-conduction band of the active metal site relative to the Fermi energy level correlates well with the efficiency in the C=O bond activation and, consequently, the catalytic activity for amidation. These results suggest that, unlike a classical understanding of strong acid sites of metal oxide surfaces, interaction of a carbonyl HOMO with an unoccupied metal d-orbital, or, in other words, covalent-like interaction between a carbonyl group and metal adsorption site, is relevant to the present system.

Trends in activity for the water electrolyser reactions on 3d M(Ni,Co,Fe,Mn) hydr(oxy)oxide catalysts.

Design and synthesis of materials for efficient electrochemical transformation of water to molecular hydrogen and of hydroxyl ions to oxygen in alkaline environments is of paramount importance in reducing energy losses in water-alkali electrolysers. Here, using 3d-M hydr(oxy)oxides, with distinct stoichiometries and morphologies in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) regions, we establish the overall catalytic activities for these reaction as a function of a more fundamental property, a descriptor, OH-M(2+δ) bond strength (0 ≤ δ ≤ 1.5). This relationship exhibits trends in reactivity (Mn < Fe < Co < Ni), which is governed by the strength of the OH-M(2+δ) energetic (Ni < Co < Fe < Mn). These trends are found to be independent of the source of the OH, either the supporting electrolyte (for the OER) or the water dissociation product (for the HER). The successful identification of these electrocatalytic trends provides the foundation for rational design of 'active sites' for practical alkaline HER and OER electrocatalysts.

Shell-anchor-core structures for enhanced stability and catalytic oxygen reduction activity.

Density functional theory is used to evaluate activity and stability properties of shell-anchor-core structures. The structures consist of a Pt surface monolayer and a composite core having an anchor bilayer where C atoms in the interstitial sites lock 3d metals in their locations, thus avoiding their surface segregation and posterior dissolution. The modified subsurface geometry induces less strain on the top surface, thus exerting a favorable effect on the surface catalytic activity where the adsorption strength of the oxygenated species becomes more moderate: weaker than on pure Pt(111) but stronger than on a Pt monolayer having a 3d metal subsurface. Here we analyze the effect of changing the nature of the 3d metal in the subsurface anchor bilayer, and we also test the use of a Pd monolayer instead of Pt on the surface. It is found that a subsurface constituted by two layers with an approximate composition of M(2)C (M = Fe, Ni, and Co) provides a barrier for the migration of subsurface core metal atoms to the surface. Consequently, an enhanced resistance against dissolution in parallel to improved oxygen reduction activity is expected, as given by the values of adsorption energies of reaction intermediates, delayed onset of water oxidation, and/or low coverage of oxygenated species at surface oxidation potentials.

Vibrational spectra of anhydrous and monohydrated caffeine and theophylline molecules and crystals.

Density functional theory and classical molecular dynamics simulations are used to investigate the vibrational spectra of caffeine and theophylline anhydrous and monohydrate molecules and those of their crystalline anhydrous and monohydrated states, with emphasis in the terahertz region of the spectra. To better understand the influence of water in the monohydrate crystal spectra, we analyze the vibrational spectra of water monomer, dimer, tetramer, and pentamer, and also those of liquid water at two different temperatures. In small water clusters, we observe the progressive addition of translational and librational modes to the terahertz region of the spectra. The water spectra predicted by rigid and flexible water models is examined with classical molecular dynamics, and the respective peaks, especially in the terahertz region, are compared with those found in the small clusters. Similar analysis done for caffeine and theophylline monohydrate molecules using density functional theory clearly shows the presence of water modes in the librational states and in the water stretching region. Molecular dynamics of caffeine and theophylline anhydrous and monohydrate crystals reveal the influence of vibrations from the molecule-molecule (caffeine or theophylline) crystal stacks and those from the water-molecule interactions found in the monohydrate molecules and new modes from molecule-molecule, water-molecule, and water-water hydrogen bonding interactions arising from collective effects in the crystal structure. Findings illustrate challenges of terahertz technology for the detection of specific substances in condensed phases.