RESUMO
Colloidal Nafion morphology plays a critical role in determining the performance of fuel cells and electrolyzers. While small-angle neutron scattering (SANS) studies previously described Nafion in liquid media as dispersed cylinders, the analysis remains nonunique with multiple possible morphological descriptions of the data. Here, using SANS and all-atomistic molecular dynamics, we confirm that Nafion morphology in liquid media differs substantially depending on dispersing agent and dispersion method. H+ Nafion dispersed in N-methyl pyrrolidone forms swollen cluster particles with physically cross-linked ionic groups. Scattering profiles from dispersed Nafion membrane have a large structure factor feature not observed for redispersed Nafion D-521. H+ Nafion dispersed in water has a highly elongated cylindrical morphology (radius = 10 ± 1.5 Å, height = 358 ± 4.7 Å) with fully dissociated and solvated sulfonic acid groups on the particle wall. These results highlight an important discrepancy between the methods of preparing Nafion dispersions and the use of simplified analysis techniques to describe Nafion morphology.
RESUMO
Noble gas transport through geologic media has important applications in the characterization of underground nuclear explosions (UNEs). Without accurate transport models, it is nearly impossible to distinguish between xenon signatures originating from civilian nuclear facilities and UNEs. Understanding xenon transport time through the earth is a key parameter for interpreting measured xenon isotopic ratios. One of the most challenging aspects of modeling gas transport time is accounting for the effect of variable water saturation of geological media. In this study, we utilize bench-scale laboratory experiments to characterize the diffusion of krypton, xenon, and sulfur hexafluoride (SF6) through intact zeolitic tuff under different saturations. We demonstrate that the water in rock cores with low partial saturation dramatically affects xenon transport time compared to that of krypton and SF6 by blocking sites in zeolitic tuff that preferentially adsorb xenon. This leads to breakthrough trends that are strongly influenced by the degree of the rock saturation. Xenon is especially susceptible to this phenomenon, a finding that is crucial to incorporate in subsurface gas transport models used for nuclear event identification. We also find that the breakthrough of SF6 diverges significantly from that of noble gases within our system. When developing field scale models, it is important to understand how the behavior of xenon deviates from chemical tracers used in the field, such as SF6 (Carrigan et al., 1996). These new insights demonstrate the critical need to consider the interplay between rock saturation and fission product sorption during transport modeling, and the importance of evaluating specific interactions between geomedia and gases of interest, which may differ from geomedia interactions with chemical tracers.
RESUMO
Interactions between a catalyst and electrolyte have paramount importance for the performance of electrochemical devices. Here, we present the cation-hydroxide-water coadsorption on the Pt surface by a rotating disk electrode and neutron reflectometry. The rotating disk electrode experiments show that the current density of Pt rapidly dropped at hydrogen oxidation potentials due to tetramethylammonium hydroxide (TMAOH)-water coadsorption. Subsequent neutron reflectometry in 0.1 M TMAOD/D2O reveals that the thickness of the coadsorbed layer increased to 18 Å after 10.5 h exposure at 0.1 V vs reverse hydrogen electrode (RHE). The scattering length density analysis revealed that the TMAOD to water ratio in the coadsorbed layer was 4.5, which was significantly higher than the reportedly highest TMAOH concentration in aqueous solution. Finally, we discuss the potential impact of the coadsorbed layer on the performance and durability of alkaline membrane fuel cells, which sheds light on the material design of high-performance alkaline electrochemical devices.
RESUMO
In situ measurements of geological materials under compression and with hydrostatic fluid pressure are important in understanding their behavior under field conditions, which in turn provides critical information for application-driven research. In particular, understanding the role of nano- to micro-scale porosity in the subsurface liquid and gas flow is critical for the high-fidelity characterization of the transport and more efficient extraction of the associated energy resources. In other applications, where parts are produced by the consolidation of powders by compression, the resulting porosity and crystallite orientation (texture) may affect its in-use characteristics. Small-angle neutron scattering (SANS) and ultra SANS are ideal probes for characterization of these porous structures over the nano to micro length scales. Here we show the design, realization, and performance of a novel neutron scattering sample environment, a specially designed compression cell, which provides compressive stress and hydrostatic pressures with effective stress up to 60 MPa, using the neutron beam to probe the effects of stress vectors parallel to the neutron beam. We demonstrate that the neutron optics is suitable for the experimental objectives and that the system is highly stable to the stress and pressure conditions of the measurements.
RESUMO
Results of oedometric consolidation experiments linked with small-angle neutron scattering (SANS) measurements are presented, using SWy-2 Wyoming bentonite clay in dry and water-bearing N2 and CO2 atmospheres. Oedometric SANS involves deforming a porous sample under uniaxial strain conditions with applied axial force and internal pore pressure control, and combines with SANS for in situ observation of pore structure evolution and interaction. Scattering from both interlayer (clay intra-aggregate) and free (interaggregate) pores is observed, showing decreasing pore size with dry consolidation and interactions between interlayer and free pore types with swelling and consolidation. Introduction of dry liquid CO2 at zero effective stress (axial stress minus pore pressure) produces large shifts in interlayer scatterers, but is reversible back to pre-CO2 levels upon decreasing pore pressure and increasing effective stress. Introduction of wet liquid CO2, conversely, produces large but irreversible changes in interlayer scatterers, which are interpreted to be the combined result of CO2 and H2O intercalation under hydrostatic conditions, but which diminish with application of effective pressure and consolidation to higher bentonite dry densities. Consideration of CO2 intercalation in smectite-bearing CO2 caprocks needs to include effects of both water and nonhydrostatic stress.
Assuntos
Bentonita , Nanoporos , Dióxido de Carbono , Espalhamento a Baixo Ângulo , WyomingRESUMO
Small-angle scattering studies generally indicate that the dimensions of unfolded single-domain proteins are independent (to within experimental uncertainty of a few percent) of denaturant concentration. In contrast, single-molecule FRET (smFRET) studies invariably suggest that protein unfolded states contract significantly as the denaturant concentration falls from high (â¼6 M) to low (â¼1 M). Here, we explore this discrepancy by using PEG to perform a hitherto absent negative control. This uncharged, highly hydrophilic polymer has been shown by multiple independent techniques to behave as a random coil in water, suggesting that it is unlikely to expand further on the addition of denaturant. Consistent with this observation, small-angle neutron scattering indicates that the dimensions of PEG are not significantly altered by the presence of either guanidine hydrochloride or urea. smFRET measurements on a PEG construct modified with the most commonly used FRET dye pair, however, produce denaturant-dependent changes in transfer efficiency similar to those seen for a number of unfolded proteins. Given the vastly different chemistries of PEG and unfolded proteins and the significant evidence that dye-free PEG is well-described as a denaturant-independent random coil, this similarity raises questions regarding the interpretation of smFRET data in terms of the hydrogen bond- or hydrophobically driven contraction of the unfolded state at low denaturant.
Assuntos
Proteínas/química , Corantes , Transferência Ressonante de Energia de Fluorescência , Guanidina , Interações Hidrofóbicas e Hidrofílicas , Modelos Moleculares , Conformação Molecular , Polietilenoglicóis/química , Conformação Proteica , Desnaturação Proteica , Dobramento de Proteína , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
The genomic material of hepatitis B virus (HBV) is confined within a fenestrated nucleocapsid consisting of 240 identical copies of the capsid protein, which has a rigid core and a positively charged and highly flexible C-terminal domain (CTD). Although previous mutagenesis studies have demonstrated the importance of the CTD in viral RNA packaging and reverse transcription, the microscopic structure of the CTD and its interaction with encapsidated nucleic acids at various stages of viral maturation remain poorly understood. Here, we present a theoretical analysis of the radial distributions of the CTD chains and nucleic acids in the hepatitis B virus nucleocapsid at the beginning and final stages of viral reverse transcription based on classical density functional theory and a coarse-gained model for the pertinent biomolecules. We find that a significant portion of the CTD is exposed at the surface of the RNA-containing immature nucleocapsid and that the CTD is mostly confined within the DNA-containing mature nucleocapsid. Large accumulation of cations is predicted inside both immature and mature nucleocapsids. The theoretical results provide new insights into the molecular mechanism of CTD regulation of viral reverse transcription and nucleocapsid trafficking during various stages of the viral replication processes.
Assuntos
Vírus da Hepatite B/química , Modelos Moleculares , Nucleocapsídeo/química , Aminoácidos/metabolismo , Ânions , Cátions , Genoma Viral/genética , Vírus da Hepatite B/genética , Simulação de Dinâmica Molecular , Proteínas do Nucleocapsídeo/química , RNA Viral/genética , Eletricidade EstáticaRESUMO
The in situ molecular scale response of end-grafted polystyrene to shear against a deuterated polystyrene melt was investigated with neutron reflectometry. The derived grafted polystyrene density profiles showed that the grafted polystyrene was retained on the quartz wafer during the measurements. The profiles suggested that the end-grafted polystyrene response to shear results in a series of metastable states, rather than equilibrium states assumed in the current theory. Except for some possible extension and/or contraction of the grafted polystyrene with shear, there was no obvious correlation between the grafted polymer structure and the shear thinning behavior observed in these samples.
RESUMO
The kinesin-14, Ncd, is a cellular motor involved in microtubule spindle assembly and contraction during mitosis and meiosis. Like other members of the kinesin superfamily, Ncd consists of two motor heads connected by a linker and a long cargo-carrying stalk. The motor heads hydrolyze ATP to ADP to provide the power stroke that moves them and the cargo along the microtubule. Whereas conventional kinesins move processively along the sense of the microtubule right-handed helix, Ncd moves in the opposite direction, apparently using a different motive mechanism. According to the current model, the microtubule-binding state of Ncd is bound by one head and then released during the motive cycle. This is distinguished from the binding states of conventional kinesins, in which the motor heads are always bound in the motive cycle with alternating one-head and two-head binding. The objective was to determine the extent of binding, the binding states of Ncd in the presence of an ATP analogue, AMPPNP, and whether the binding is cooperative. Small-angle neutron scattering (SANS) of microtubules decorated with a deuterated Ncd construct, Ncd281, in solution containing 42% D(2)O was used. These conditions render the microtubule `invisible' to SANS, while amplifying the SANS from the Ncd constructs. In the presence of AMPPNP, 75% of Ncd281 was not bound. The remainder was bound cooperatively by one of its motor heads to the microtubule.
Assuntos
Adenilil Imidodifosfato/metabolismo , Proteínas de Drosophila/química , Proteínas de Drosophila/metabolismo , Cinesinas/química , Cinesinas/metabolismo , Microtúbulos/metabolismo , Animais , Drosophila melanogaster/metabolismo , Difração de Nêutrons , Espalhamento a Baixo Ângulo , SoluçõesRESUMO
Although several other neutron rheometers have been built to study soft matter under nonequilibrium conditions, none of them have the ability to measure the structure and behavior of the polymeric interfacial regions in highly viscous polymer melts which require high torques/high strain rates and high temperatures. A neutron rheometer in the cone and plate geometry has been constructed at the Los Alamos Neutron Science Center to rectify this lack of experimental instrumentation. It is also the first-of-its-kind to perform neutron reflectivity studies concurrently with rheological measurements. The details of both the development and testing of the Los Alamos Neutron Science Center neutron rheometer in the cone and plate configuration are described. Proof of principle neutron reflectivity results of end-grafted polystyrene against an identical melt under shear are presented, showing qualitatively that the structural attributes of the end-grafted polymer change when exposed to shear.
RESUMO
A neutron rheometer in the Couette geometry has been built at the Los Alamos Neutron Science Center to examine the molecular steady-state and dynamic responses of entangled polymeric materials in the bulk under the application of shear stress via small-angle neutron scattering. Although similar neutron rheometers have been fabricated elsewhere, this new design operates under the extreme conditions required for measuring the structure and behavior of high molecular weight polymer melts. Specifically, the rheometer achieves high torques (200 N m) and shear rates (865 s(-1)) simultaneously, never before attainable with other neutron rheometers at temperatures up to 240 degrees C under an inert gas environment. The design of the instrument is such that relatively small sample sizes are required. The testing of the Los Alamos Neutron Science Center Neutron Rheometer in the Couette design both as a rheometer and in the small-angle neutron optical configuration on highly viscous polystyrene is presented. The observed anisotropic neutron scattering pattern of the polystyrene melt at a molecular weight above entanglement provides evidence that the conformation of the polymer chains are elongated in the direction of the melt flow, in agreement with the current theories concerning linear polymers in the bulk.
RESUMO
Aqueous dispersions of mixed egg yolk phosphatidylcholine (PC) and poly(ethylene glycol) (PEG) modified distearoyl phosphatidylethanolamine (DSPE) were investigated with the purpose of determining shape, size, and conformation of the formed mixed micelles. The samples were prepared at a range of DSPEPEG to PC molar ratios ([DSPEPEG/PC] from 100:0 to 30:70) and with, respectively, DSPEPEG2000 and DSPEPEG5000, where 2000 and 5000 refer to the molar masses of the PEG chains. Particle shape and internal structure were studied using small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). The contrast of the micelles is different for X-rays and neutrons, and by combining SANS and SAXS, complementary information about the micelle structure was obtained. The detailed structure of the micelles was determined in a self-consistent way by fitting a model for the micelles to SANS and SAXS data simultaneously. In general, a model for the micelles with a hydrophobic core, surrounded by a dense hydrophilic layer that is again surrounded by a corona of PEG chains in the form of Gaussian random coils attached to the outer surface, is in good agreement with the scattering data. At high DSPEPEG contents, nearly spherical micelles are formed. As the PC content increases the micelles elongate, and at a DSPEPEG/PC ratio of 30:70, rodlike micelles longer than 1000 angstroms are formed. We demonstrate that by mixing DSPEPEG and PC a considerable latitude in controlling the particle shape is obtained. Our results indicate that the PEG chains in the corona are in a relatively unperturbed Gaussian random coil conformation even though the chains are far above the coil-coil overlap concentration and, therefore, interpenetrating. This observation in combination with the observed growth behavior questions that the "mushroom-brush"transition is the single dominating factor for determining the particle shape as assumed in previous theoretical work (Hristova, K.; Needham, D. Macromolecules 1995, 28, 991-1002).
Assuntos
Fosfatidilcolinas/química , Fosfatidiletanolaminas/química , Fosfolipídeos/química , Polietilenoglicóis/química , Água/química , Interações Hidrofóbicas e Hidrofílicas , Matemática , Micelas , Modelos Químicos , Conformação Molecular , Nêutrons , Tamanho da Partícula , Espalhamento de Radiação , Solubilidade , Raios XRESUMO
Sterically stabilized micelles (SSM) composed of poly(ethylene glycol-2000)-grafted distearoylphosphatidylethanolamine (DSPE-PEG) and sterically stabilized mixed micelles (SSMM) composed of DSPE-PEG and egg-phosphatidyl choline (PC) have recently been introduced as novel lipid based carriers for water-insoluble drugs. However, factors that affect the solubilization behavior of these phospholipid micelles are not well understood. This study investigates the effect of PEG chain length and PC content on physical properties and solubilization potential of PEGylated phospholipid micelles. Critical micelle concentrations (CMC) determined for DSPE-PEG with different PEG chain lengths (2000, 3000, and 5000) using a fluorescent probe were in the micromolar range (0.5-1.5 microM) with higher CMC for longer PEG chain length. The size of micelles determined by quasi-elastic light scattering (QELS) showed that micellar systems became heterogeneous when PC was added at > or =25% for DSPE-PEG 2000 and > or = 40% for DSPE-PEG 5000, respectively. Above these critical PC ratios a significant increase in aggregation number and formation of rodlike particles were observed by small angle neutron scattering (SANS). Solubilization of diazepam was greater with DSPE-PEG 2000 than DSPE-PEG 5000 simple micelles as determined by RP-HPLC. However, DSPE-PEG 5000 micelles showed greater improvement in solubilization of the water-insoluble drug with an increase in PC content. In conclusion, phospholipid micelle size and solubilization potential varied with PEG chain length and PC content in the mixed micelle. Aggregation number and shape of the micelles did not significantly change until the critical PC concentrations.