A Comparison of a Novel Stretchable Smart Patch for Measuring Runner's Step Rates with Existing Measuring Technologies.

A novel wearable smart patch can monitor various aspects of physical activity, including the dynamics of running, but like any new device developed for such applications, it must first be tested for validity. Here, we compare the step rate while running in place as measured by this smart patch to the corresponding values obtained utilizing ''gold standard'' MEMS accelerometers in combination with bilateral force plates equipped with HBM load cells, as well as the values provided by a three-dimensional motion capture system and the Garmin Dynamics Running Pod. The 15 healthy, physically active volunteers (age = 23 ± 3 years; body mass = 74 ± 17 kg, height = 176 ± 10 cm) completed three consecutive 20-s bouts of running in place, starting at low, followed by medium, and finally at high intensity, all self-chosen. Our major findings are that the rates of running in place provided by all four systems were valid, with the notable exception of the fast step rate as measured by the Garmin Running Pod. The lowest mean bias and LoA for these measurements at all rates were associated consistently with the smart patch.

Docking and Activity of DNA Polymerase on Solid-State Nanopores.

Integration of motor enzymes with biological nanopores has enabled commercial DNA sequencing technology; yet studies of the similar principle applying to solid-state nanopores are limited. Here, we demonstrate the real-life monitoring of phi29 DNA polymerase (DNAP) docking onto truncated-pyramidal nanopore (TPP) arrays through both electrical and optical readout. To achieve effective docking, atomic layer deposition of hafnium oxide is employed to reduce the narrowest pore opening size of original silicon (Si) TPPs to sub-10 nm. On a single TPP with pore opening size comparable to DNAP, ionic current measurements show that a polymerase-DNA complex can temporally dock onto the TPP with a certain docking orientation, while the majority become translocation events. On 5-by-5 TPP arrays, a label-free optical detection method using Ca2+ sensitive dye, are employed to detect the docking dynamics of DNAP. The results show that this label-free detection strategy is capable of accessing the docking events of DNAP on TPP arrays. Finally, we examine the activity of docked DNAP by performing on-site rolling circle amplification to synthesize single-stranded DNA (ssDNA), which serves as a proof-of-concept demonstration of utilizing this docking scheme for emerging nanopore sensing applications.

Thermally controlled microfluidic back pressure regulator.

By using the temperature dependence of viscosity, we introduce a novel type of microfluidic lab-on-a-chip back pressure regulator (BPR) that can be integrated into a micro-total-analysis-system. A BPR is an important component used to gain pressure control and maintain elevated pressures in e.g. chemical extractions, synthesis, and analyses. Such applications have been limited in microfluidics, since the back pressure regularly has been attained by passive restrictors or external large-scale BPRs. Herein, an active microfluidic BPR is presented, consisting of a glass chip with integrated thin-film heaters and thermal sensors. It has no moving parts but a fluid restrictor where the flow resistance is controlled by the change of viscosity with temperature. Performance was evaluated by regulating the upstream pressure of methanol or water using a PID controller. The developed BPR has the smallest reported dead volume of 3 nL and the thermal actuation has time constants of a few seconds. The pressure regulation were reproducible with a precision in the millibar range, limited by the pressure sensor. The time constant of the pressure changes was evaluated and its dependence of the total upstream volume and the compressibility of the liquids is introduced.

Microfluidic active pressure and flow stabiliser.

In microfluidics, a well-known challenge is to obtain reproducible results, often constrained by unstable pressures or flow rates. Today, there are existing stabilisers made for low-pressure microfluidics or high-pressure macrofluidics, often consisting of passive membranes, which cannot stabilise long-term fluctuations. In this work, a novel stabilisation method that is able to handle high pressures in microfluidics is presented. It is based on upstream flow capacitance and thermal control of the fluid's viscosity through a PID controlled restrictor-chip. The stabiliser consists of a high-pressure-resistant microfluidic glass chip with integrated thin films, used for resistive heating. Thereby, the stabiliser has no moving parts. The quality of the stabilisation was evaluated with an ISCO pump, an HPLC pump, and a Harvard pump. The stability was greatly improved for all three pumps, with the ISCO reaching the highest relative precision of 0.035% and the best accuracy of 8.0 ppm. Poor accuracy of a pump was compensated for in the control algorithm, as it otherwise reduced the capacity to stabilise longer times. As the dead volume of the stabiliser was only 16 nL, it can be integrated into micro-total-analysis- or other lab-on-a-chip-systems. By this work, a new approach to improve the control of microfluidic systems has been achieved.

High-resolution particle separation by inertial focusing in high aspect ratio curved microfluidics.

The ability to focus, separate and concentrate specific targets in a fluid is essential for the analysis of complex samples such as biological fluids, where a myriad of different particles may be present. Inertial focusing is a very promising technology for such tasks, and specially a recently presented variant, inertial focusing in High Aspect Ratio Curved systems (HARC systems), where the systems are easily engineered and focus the targets together in a stable position over a wide range of particle sizes and flow rates. However, although convenient for laser interrogation and concentration, by focusing all particles together, HARC systems lose an essential feature of inertial focusing: the possibility of particle separation by size. Within this work, we report that HARC systems not only do have the capacity to separate particles but can do so with extremely high resolution, which we demonstrate for particles with a size difference down to 80 nm. In addition to the concept for particle separation, a model considering the main flow, the secondary flow and a simplified expression for the lift force in HARC microchannels was developed and proven accurate for the prediction of the performance of the systems. The concept was also demonstrated experimentally with three different sub-micron particles (0.79, 0.92 and 1.0 µm in diameter) in silicon-glass microchannels, where the resolution in the separation could be modulated by the radius of the channel. With the capacity to focus sub-micron particles and to separate them with high resolution, we believe that inertial focusing in HARC systems is a technology with the potential to facilitate the analysis of complex fluid samples containing bioparticles like bacteria, viruses or eukaryotic organelles.

The upper limit and lift force within inertial focusing in high aspect ratio curved microfluidics.

Microfluidics exploiting the phenomenon of inertial focusing have attracted much attention in the last decade as they provide the means to facilitate the detection and analysis of rare particles of interest in complex fluids such as blood and natural water. Although many interesting applications have been demonstrated, the systems remain difficult to engineer. A recently presented line of the technology, inertial focusing in High Aspect Ratio Curved microfluidics, has the potential to change this and make the benefits of inertial focusing more accessible to the community. In this paper, with experimental evidence and fluid simulations, we provide the two necessary equations to design the systems and successfully focus the targets in a single, stable, and high-quality position. The experiments also revealed an interesting scaling law of the lift force, which we believe provides a valuable insight into the phenomenon of inertial focusing.

Dynamics of DNA Clogging in Hafnium Oxide Nanopores.

Interfacing solid-state nanopores with biological systems has been exploited as a versatile analytical platform for analysis of individual biomolecules. Although clogging of solid-state nanopores due to nonspecific interactions between analytes and pore walls poses a persistent challenge in attaining the anticipated sensing efficacy, insufficient studies focus on elucidating the clogging dynamics. Herein, we investigate the DNA clogging behavior by passing double-stranded (ds) DNA molecules of different lengths through hafnium oxide(HfO2)-coated silicon (Si) nanopore arrays, at different bias voltages and electrolyte pH values. Employing stable and photoluminescent-free HfO2/Si nanopore arrays permits a parallelized visualization of DNA clogging with confocal fluorescence microscopy. We find that the probability of pore clogging increases with both DNA length and bias voltage. Two types of clogging are discerned: persistent and temporary. In the time-resolved analysis, temporary clogging events exhibit a shorter lifetime at higher bias voltage. Furthermore, we show that the surface charge density has a prominent effect on the clogging probability because of electrostatic attraction between the dsDNA and the HfO2 pore walls. An analytical model based on examining the energy landscape along the DNA translocation trajectory is developed to qualitatively evaluate the DNA-pore interaction. Both experimental and theoretical results indicate that the occurrence of clogging is strongly dependent on the configuration of translocating DNA molecules and the electrostatic interaction between DNA and charged pore surface. These findings provide a detailed account of the DNA clogging phenomenon and are of practical interest for DNA sensing based on solid-state nanopores.

Investigation of thermal conductivity for liquid metal composites using the micromechanics-based mean-field homogenization theory.

For the facile use of liquid metal composites (LMCs) for soft, stretchable and thermal systems, it is crucial to understand and predict the thermal conductivity of the composites as a function of liquid metal (LM) volume fraction and applied strain. In this study, we investigated the effective thermal conductivity of LMCs based on various mean-field homogenization frameworks including Eshelby, Mori-Tanaka, differential and double inclusion methods. The double inclusion model turned out to make the prediction closest to the experimental results in a wide range of LM volume fractions. Interestingly, we found that the theoretical models based on the assumption of ideal LM dispersion and zero interfacial resistance underestimated the thermal conductivity compared to the experimental results in a low volume fraction regime. By considering the accompanied variations in the LM inclusion's aspect ratios under a typical size distribution of inclusions (∼µm), the change of effective thermal conductivity was predicted under a uniaxial 300% tensile strain. Our study will deepen the understanding of the thermal properties of LMCs and support the designs of stretchable thermal interfaces and packaging with LMCs in the future.

Head-compliant microstrip split ring resonator for non-invasive healing monitoring after craniosynostosis-based surgery.

A soft and highly directive, proximity-coupled split-ring resonator fabricated with a liquid alloy, copper and polydimethylsiloxane (PDMS) is presented. The same was designed for sensing osteogenesis of calvarial bone. As dielectric properties of bone grafts in ossifying calvarial defects should change during the osteogenesis process, devices like this could monitor the gradual transformation of the defect into bone by differentiating changes in the dielectric properties as shifts in the resonance frequency. Computational Software Technology (CST) Microwave Studio®-based simulation results on computational head models were in good agreement with laboratory results on head phantom models, which also included the comparison with an in-vivo measurement on the human head. A discussion based on an inductive reasoning regarding dynamics' considerations is provided as well. Since the skin elasticity of newborn children is high, stretching and crumpling could be significant. In addition, due to typical head curvatures in newborn children, bending should not be a significant issue, and can provide higher energy focus in the defect area and improve conformability. The present concept could support the development of soft, cheap and portable follow-up monitoring systems to use in outpatient hospital and home care settings for post-operative monitoring of bone healing after reconstructive surgical procedures.

On-chip background dilution in droplets with high particle recovery using acoustophoresis.

Droplet microfluidics has shown great potential for on-chip biological and chemical assays. However, fluid exchange in droplet microfluidics with high particle recovery is still a major bottleneck. Here, using acoustophoresis, we present for the first time a label-free method to achieve continuous background dilution in droplets containing cells with high sample recovery. The system comprises droplet generation, acoustic focusing, droplet splitting, picoinjection, and serpentine mixing on the same chip. The capacities of the picoinjection and the droplet split to dilute the background fluorescent signal in the droplets have been characterized. The sample recovery at different droplet split ratios has also been characterized. The results show a maximum of 4.3-fold background dilution with 87.7% particle recovery. We also demonstrated that the system can be used to dilute background fluorescent signal in droplets containing either polystyrene particles or endothelial cells.

High-Performance Liquid Alloy Patterning of Epidermal Strain Sensors for Local Fine Skin Movement Monitoring.

Nowadays, stretchable/epidermal electronics based on liquid alloys has attracted more and more attention, and various processing techniques have subsequently been developed to demonstrate diverse applications never seen before. However, to fully exploit its potential advantages, epidermal electronics is still searching for a technique meeting all demands on resolution, pattern complexity, and operational flexibility. In this study, we propose a technique that allows for complex and high-density patterns on thin stretchable substrates by combining ultraviolet laser patterning of a modified water-soluble mask, atomized spray deposition of liquid alloys on a flexible temporary substrate, lift-off by water dissolving, and finally, component integration and encapsulation. With this new technique, it was possible to make epidermal precision strain sensors with liquid alloy patterns of high density, which were capable of monitoring fine local skin movements such as the detailed process of wrinkle formation as well as the overall motion of the body part. In addition, this process is highly efficient and well controllable, with high potential for possible industrial automation and massive production.

Inertial focusing with sub-micron resolution for separation of bacteria.

In this paper, we study inertial focusing in curved channels and demonstrate the alignment of particles with diameters between 0.5 and 2.0 µm, a range of biological relevance since it comprises a multitude of bacteria and organelles of eukaryotic cells. The devices offer very sensitive control over the equilibrium positions and allow two modes of operation. In the first, particles having a large variation in size are focused and concentrated together. In the second, the distribution spreads in a range of sizes achieving separation with sub-micron resolution. These systems were validated with three bacteria species (Escherichia coli, Salmonella typhimurium and Klebsiella pneumoniae) showing good alignment while maintaining the viability in all cases. The experiments also revealed that the particles follow a helicoidal trajectory to reach the equilibrium positions, similar to the fluid streamlines simulated in COMSOL, implying that these positions occupy different heights in the cross section. When the equilibrium positions move to the inner wall as the flow rate increases, they are at a similar distance from the centre than in straight channels (∼0.6R), but when the equilibrium positions move to the outer wall as the flow rate increases, they are closer to the centre and the particles pass close to the inner wall to elevate their position before reaching them. These observations were used along with COMSOL simulations to explain the mechanism behind the local force balance and the migration of particles, which we believe contributes to further understanding of the phenomenon. Hopefully, this will make designing more intuitive and reduce the high pressure demands, enabling manipulation of particles much smaller than a micrometer.

Microfluidic Control Board for High-Pressure Flow, Composition, and Relative Permittivity.

Flow control is central to microfluidics and chromatography. With decreasing dimensions and high pressures, precise fluid flows are often needed. In this paper, a high-pressure flow control system is presented, allowing for the miniaturization of chromatographic systems and the increased performance of microfluidic setups by controlling flow, composition, and relative permittivity of two-component flows with CO2. The system consists of four chips: two flow actuator chips, one mixing chip, and one relative permittivity sensor. The actuator chips, throttling the flow, required no moving parts as they instead relied on internal heaters to change the fluid resistance. This allows for flow control using miniaturized fluid delivery systems containing only a single pump or pressure source. Mobile phase gradients between 49% and 74% methanol in CO2 were demonstrated. Depending on how the actuator chips were dimensioned, the position of this range could be set for different method-specific needs. With the microfluidic control board, both flow and composition could be controlled from constant pressure sources, drift could be removed, and variations in composition could be lowered by 84%, resulting in microflows of CO2 and methanol with a variation in the composition of ±0.30%.

Stretchable Thermoelectric Generators Metallized with Liquid Alloy.

Conventional thermoelectric generators (TEGs) are normally hard, rigid, and flat. However, most objects have curvy surfaces, which require soft and even stretchable TEGs for maximizing efficiency of thermal energy harvesting. Here, soft and stretchable TEGs using conventional rigid Bi2Te3 pellets metallized with a liquid alloy is reported. The fabrication is implemented by means of a tailored layer-by-layer fabrication process. The STEGs exhibit an output power density of 40.6 µW/cm2 at room temperature. The STEGs are operational after being mechanically stretched-and-released more than 1000 times, thanks to the compliant contact between the liquid alloy interconnects and the rigid pellets. The demonstrated interconnect scheme will provide a new route to the development of soft and stretchable energy-harvesting avenues for a variety of emerging electronic applications.

PDMS-Based Elastomer Tuned Soft, Stretchable, and Sticky for Epidermal Electronics.

A highly soft, stretchable, and sticky polydimethylsiloxane-based elastomer is achieved by adding small fractions of an amine-based polymer. The modified elastomer is tuned with a simple mixing step and shows good processability for microstructure fabrication. The modified elastomer shows excellent compatibility with an epidermal strain sensor on human skin.

On nanopore DNA sequencing by signal and noise analysis of ionic current.

DNA sequencing, i.e., the process of determining the succession of nucleotides on a DNA strand, has become a standard aid in biomedical research and is expected to revolutionize medicine. With the capability of handling single DNA molecules, nanopore technology holds high promises to become speedier in sequencing at lower cost than what are achievable with the commercially available optics- or semiconductor-based massively parallelized technologies. Despite tremendous progress made with biological and solid-state nanopores, high error rates and large uncertainties persist with the sequencing results. Here, we employ a nano-disk model to quantitatively analyze the sequencing process by examining the variations of ionic current when a DNA strand translocates a nanopore. Our focus is placed on signal-boosting and noise-suppressing strategies in order to attain the single-nucleotide resolution. Apart from decreasing pore diameter and thickness, it is crucial to also reduce the translocation speed and facilitate a stepwise translocation. Our best-case scenario analysis points to severe challenges with employing plain nanopore technology, i.e., without recourse to any signal amplification strategy, in achieving sequencing with the desired single-nucleotide resolution. A conceptual approach based on strand synthesis in the nanopore of the translocating DNA from single-stranded to double-stranded is shown to yield a 10-fold signal amplification. Although it involves no advanced physics and is very simple in mathematics, this simple model captures the essence of nanopore sequencing and is useful in guiding the design and operation of nanopore sequencing.

Capillary Self-Alignment of Microchips on Soft Substrates.

Soft micro devices and stretchable electronics have attracted great interest for their potential applications in sensory skins and wearable bio-integrated devices. One of the most important steps in building printed circuits is the alignment of assembled micro objects. Previously, the capillary self-alignment of microchips driven by surface tension effects has been shown to be able to achieve high-throughput and high-precision in the integration of micro parts on rigid hydrophilic/superhydrophobic patterned surfaces. In this paper, the self-alignment of microchips on a patterned soft and stretchable substrate, which consists of hydrophilic pads surrounded by a superhydrophobic polydimethylsiloxane (PDMS) background, is demonstrated for the first time. A simple process has been developed for making superhydrophobic soft surface by replicating nanostructures of black silicon onto a PDMS surface. Different kinds of PDMS have been investigated, and the parameters for fabricating superhydrophobic PDMS have been optimized. A self-alignment strategy has been proposed that can result in reliable self-alignment on a soft PDMS substrate. Our results show that capillary self-alignment has great potential for building soft printed circuits.

Mechanically Stretchable and Electrically Insulating Thermal Elastomer Composite by Liquid Alloy Droplet Embedment.

Stretchable electronics and soft robotics have shown unsurpassed features, inheriting remarkable functions from stretchable and soft materials. Electrically conductive and mechanically stretchable materials based on composites have been widely studied for stretchable electronics as electrical conductors using various combinations of materials. However, thermally tunable and stretchable materials, which have high potential in soft and stretchable thermal devices as interface or packaging materials, have not been sufficiently studied. Here, a mechanically stretchable and electrically insulating thermal elastomer composite is demonstrated, which can be easily processed for device fabrication. A liquid alloy is embedded as liquid droplet fillers in an elastomer matrix to achieve softness and stretchability. This new elastomer composite is expected useful to enhance thermal response or efficiency of soft and stretchable thermal devices or systems. The thermal elastomer composites demonstrate advantages such as thermal interface and packaging layers with thermal shrink films in transient and steady-state cases and a stretchable temperature sensor.

Self-transport and self-alignment of microchips using microscopic rain.

Alignment of microchips with receptors is an important process step in the construction of integrated micro- and nanosystems for emerging technologies, and facilitating alignment by spontaneous self-assembly processes is highly desired. Previously, capillary self-alignment of microchips driven by surface tension effects on patterned surfaces has been reported, where it was essential for microchips to have sufficient overlap with receptor sites. Here we demonstrate for the first time capillary self-transport and self-alignment of microchips, where microchips are initially placed outside the corresponding receptor sites and can be self-transported by capillary force to the receptor sites followed by self-alignment. The surface consists of hydrophilic silicon receptor sites surrounded by superhydrophobic black silicon. Rain-induced microscopic droplets are used to form the meniscus for the self-transport and self-alignment. The boundary conditions for the self-transport have been explored by modeling and confirmed experimentally. The maximum permitted gap between a microchip and a receptor site is determined by the volume of the liquid and by the wetting contrast between receptor site and substrate. Microscopic rain applied on hydrophilic-superhydrophobic patterned surfaces greatly improves the capability, reliability and error-tolerance of the process, avoiding the need for accurate initial placement of microchips, and thereby greatly simplifying the alignment process.