RESUMO
The performance of supercapacitors strongly depends on the electrochemical characterizations of electrode materials. Herein, a composite material consisted of iron(III) oxide (Fe2O3) and multilayer graphene-wrapped copper nanoparticles (Fe2O3/MLG-Cu NPs) is fabricated on a flexible carbon cloth (CC) substrate via two-step synthesis process for supercapacitor application. Where, MLG-Cu NPs are prepared on CC by one-step chemical vapor deposition synthesis approach; thereafter, the Fe2O3is further deposited on the MLG-Cu NPs/CC via successive ionic layer adsorption and reaction method. The related material characterizations of Fe2O3/MLG-Cu NPs are well investigated by scanning electron microscopic, high resolution transmission electron microscopy), Raman spectrometer and X-ray photoelectron spectroscopy; the electrochemical behaviors of the pertinent electrodes are studied by cyclic voltammogram, galvanostatic charge/discharge (GCD) and electrochemical impedance spectroscopy measurements. The flexible electrode with Fe2O3/MLG-Cu NPs composites exhibits the best specific capacitance of 1092.6 mF cm-2at 1 A g-1, which is much higher than those of electrodes with Fe2O3(863.7 mF cm-2), MLG-Cu NPs (257.4 mF cm-2), multilayer graphene hollow balls (MLGHBs, 14.4 mF cm-2) and Fe2O3/MLGHBs (287.2 mF cm-2). Fe2O3/MLG-Cu NPs electrode also exhibits an excellent GCD durability, and its capacitance remains 88% of its original value after 5000 cycles of the GCD process. Finally, a supercapacitor system consisted of four Fe2O3/MLG-Cu NPs/CC electrodes can efficiently power various light-emitting diodes (i.e. red, yellow, green, and blue lights), demonstrating the practical application of Fe2O3/MLG-Cu NPs/CC electrode.
RESUMO
The performance of supercapacitors strongly depends on the electrochemical characterizations of electrode materials. Herein, a composite material consisted of polypyrrole (PPy) and multilayer graphene-wrapped copper nanoparticles (PPy/MLG-Cu NPs) is fabricated on a flexible carbon cloth (CC) substrate via two-step synthesis process for supercapacitor application. Where, MLG-Cu NPs are prepared on CC by one-step chemical vapor deposition synthesis approach; thereafter, the PPy is further deposited on the MLG-Cu NPs/CC via electropolymerization. The related material characterizations of PPy/MLG-Cu NPs are well investigated by scanning electron microscopic, high resolution transmission electron microscopy, Raman spectrometer and x-ray photoelectron spectroscopy; the electrochemical behaviors of the pertinent electrodes are studied by cyclic voltammogram, galvanostatic charge/discharge and electrochemical impedance spectroscopy measurements. The flexible electrode with PPy/MLG-Cu NPs composites exhibits the best specific capacitance of 845.38 F g-1at 1 A g-1, which is much higher than those of electrodes with PPy (214.30 F g-1), MLG-Cu NPs (6.34 F g-1), multilayer graphene hollow balls (MLGHBs; 52.72 F g-1), and PPy/MLGHBs (237.84 F g-1). Finally, a supercapacitor system consisted of four PPy/MLG-Cu NPs/CC electrodes can efficiently power various light-emitting diodes (i.e. red, yellow, green and blue lighs), demonstrating the practical application of PPy/MLG-Cu NPs/CC electrode.
RESUMO
BACKGROUND: In this era of ubiquitous information, patient record exchange among hospitals still has technological and individual barriers including resistance to information sharing. Most research on user attitudes has been limited to one type of user or aspect. Because few analyses of attitudes toward electronic patient records (EPRs) have been conducted, understanding the attitudes among different users in multiple aspects is crucial to user acceptance. This proof-of-concept study investigated the attitudes of users toward the inter-hospital EPR exchange system implemented nationwide and focused on discrepant behavioral intentions among three user groups. METHODS: The system was designed by combining a Health Level 7-based protocol, object-relational mapping, and other medical informatics techniques to ensure interoperability in realizing patient-centered practices. After implementation, three user-specific questionnaires for physicians, medical record staff, and patients were administered, with a 70 % response rate. The instrument showed favorable convergent construct validity and internal consistency reliability. Two dependent variables were applied: the attitudes toward privacy and support. Independent variables comprised personal characteristics, work characteristics, human aspects, and technology aspects. Major statistical methods included exploratory factor analysis and general linear model. RESULTS: The results from 379 respondents indicated that the patients highly agreed with privacy protection by their consent and support for EPRs, whereas the physicians remained conservative toward both. Medical record staff was ranked in the middle among the three groups. The three user groups demonstrated discrepant intentions toward privacy protection and support. Experience of computer use, level of concerns, usefulness of functions, and specifically, reason to use electronic medical records and number of outpatient visits were significantly associated with the perceptions. Overall, four categories of independent variables were associated with the mean difference in the perceptions. CONCLUSIONS: Discrepant attitudes toward privacy and support among the three user groups are identified. Patients may require further education and communication regarding the system. Culturally fit e-Consent should be incorporated into the system to fully utilize the computing power of the Internet when also considering workload. The concern for misuse of EPRs might lead to low support among physicians. Highly readable EPR documents and managerial incentives for information exchange may improve system use.
