Nanopatterned Polymer Molds Using Anodized Aluminum Templates for Anti-Reflective Coatings.

This work introduces a facile geometry-controlled method for the fabrication of embossed and engraved polymeric moth-eye-inspired nanostructures in imprinting molds using anodic aluminum oxide (AAO) templates, resulting in a novel anti-reflective transparent coating. The moth-eye nanostructures are prepared directly on the surface of a flexible polyethylene terephthalate (PET) substrate. As a prerequisite procedure, a UV-curable polyurethane acrylate resin is spun on the PET. The shape of the moth-eye nanostructures can then be adjusted by controlling the size and shape of the nanopores in the AAO templates. Both embossed and concaved polymer moth-eye nanostructures were successfully mounted on a PET substrate. Embossed polymer replica molds were prepared using the AAO master templates in combination with an imprinting process. As revealed by field-emission electron microscope (FE-SEM) images, conical nanopatterns in the AAO template with a diameter of ~90 nm and a depth of ~100 nm, create a homogeneous embossed morphology in the polymer moth-eye nanostructure. The polymeric molds with the depths of 300 and 500 nm revealed the amalgamated structures in their apexes. In addition, a dip-imprinting process of the polymeric layers was implemented to yield a concaved mold by assembly on the surface of the 100 nm embossed polymer mold substrate. Considering that the embossed structures may be crumbled due to their protuberant shapes, the concaved geometries can have an advantage of stability in a certain application concerning physical degradation along with a higher transmission by ~2%, despite somewhat nonuniform structure. The experimental and theoretical results of this study indicate that this polymer layer has the potential for use in anti-reflective coating applications in transparent films.

Plasmonic nanorod array for effective photothermal therapy in hyperthermia.

Optical properties of anisotropic gold nanorod arrays inside anodic aluminium oxide substrates enhance the longitudinal absorption intensities and the hyperthermia cancer cell killing at 42.1 °C under photothermal laser exposures at 671 nm.

Surface-Enhanced Raman Scattering-Based Dual-Flow Lateral Flow Assay Sensor for the Ultrasensitive Detection of the Thyroid-Stimulating Hormone.

The surface-enhanced Raman scattering (SERS)-based lateral flow assay (LFA) strip has been considered a high-sensitivity sensor that can overcome the low sensitivity and the difficulty of quantitative analysis problems inherent in the colorimetric LFA sensor. In the SERS-based LFA strip reported so far, a liquid sample flows through the nitrocellulose membrane in a single pathway. In some cases, however, this single-flow approach still has a limitation in detection sensitivity. This study developed a conceptually new SERS-based dual-flow LFA sensor to improve the detection sensitivity in a single-flow LFA sensor. First, a 25 nm Raman reporter-labeled gold nanoparticle (AuNP) solution flowed through one way, and a 45 nm AuNP solution continuously flowed through another path. This sequential flow of two different AuNP solutions enables forming additional bright hot spots between 25 and 45 nm AuNPs in the test line, and the SERS signal is strongly enhanced. Using this SERS-based dual-flow LFA sensor, it was possible to detect thyroid-stimulating hormone less than 0.5 µIU/mL that cannot be measured with a SERS-based single-flow LFA sensor.